Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 169. (Read 703563 times)

I understand the complications that comes with implementing such a feature through a web interface, I do however think that all new firmware have the same way of enabling and disabling the "Low Power Enhanced Mode", or at least it looks the same from what I saw, code wise i bet you know better 

Thank you for your consideration.

The most recent development versions of Awesome Miner has some internal changes to how the default pools are set on the Antminer via the web interface. It should also be a bit better at avoiding these kind of side effects. Can you please try if version 6.4.4 works better?

Thanks for your feedback. I looked into this recently and it could possibly be supported, but it's a bit high risk to make these changes over the web interface.

The reason is the quite bad design of how Antminers apply web related settings and it's not possible to modify only a single setting. It's not even a one-to-one mapping between the settings you can read from the Antminer and the name of all the parameters you need to set if you want to change one single property. It's also different depending on firmware version and probably some differences between the Antminer models as well. The bottom line is that it will probably be possible to find out how to do this on a specific firmware version of S9, but it will not be a general feature with great compatibility.

Is this the error message you get when the mining software failed and you selected to run Diagnostics? That should be supported in the latest development version 6.4.4.

Can you please let me know if you run version 6.4.2 or 6.4.4? If you run 6.4.4, is this for a user defined Managed Software?

Think there is a bug on tool "default pools via web"

When ever i apply a new default pool on reboot of S9 it activates ELPM

This works fine for SSH enabled firmware, which is not the case with the resent firmware, or and gears . would you please add it to be excused using the web interface just like the new "reboot" function?



The second one from top is what i am talking about.

I wont to start with admin Claymore 14.5 but this  ERROR

Failed to start miner process: Пoтoк StandardOut нe был пepeнaпpaвлeн или пpoцecc eщe нe был зaпyщeн.

Wow, I will try the updated Z11 firmware.

Thank you very much for nice help!!

Sam

Hi Sam,
The most recent Antminers like Z11 doesn't support SSH and Privileged API access by default. This is a decision from Bitmain and there are quite a number of users upset about these limitations.

One solution is to use the updated Z11 firmware released by @efudd here on BitcoinTalk:
https://bitcointalksearch.org/topic/m.50664518

With this firmware you will get SSH access and Awesome Miner will be able to set Privileged API access on your Antminer. This will also make it possible to run the profit switcher with the Antminer.

Although Awesome Miner do support configuration of the three default pools via the Antminer web interface, this is not supported by the profit switching feature. The reason is that a change of default pools requires a restart of the mining process and mining time will be lost.

Hi

I have  just purchased Awesome miner professional, expecting auto profit switching for antminer Z11.

Now I noticed that  Privileged API access is not possible for Z11.
Does this mean I cannot use  auto profit switching?

Is it possible to use auto profit switching by web interface?

Thank you in advance for any help.

Sam

Correct.  I set a max temp and the fans will speed us as much as they need to in order to not exceed the max temp.


It has been a while since I tried HiveOS and I don't recall the exact error.  Might have since been resolved.  That said, with more than 3 miners, there is a monthly cost per rig.  nvOC is free (the version I run).  I run the Premium Edition of AM, and I'd rather not have to pay for another mining platform on top of what I already have.  I'll probably just stick with Win10 on my rigs, controlled by AM, although maintenance can be a pain sometimes. 


That would be an awesome feature!  (pun intended, lol)


Understood.

Version 6.4.4 (Development preview of 6.5)

 GPU mining
  - Native overclocking supports Reset command to be added to a clocking profile
  - Added diagnostics support for mining software running with Administrator privileges
 Features
  - Copy and paste of hashrate, power usage and software selection between profit profiles
 Rules
  - Device power usage trigger has been updated to take user defined additional power per miner into consideration when the trigger condition is for an entire miner
 User interface
  - Include PCI Bus ID on the GPU mapping page
  - Benchmark window allows scrolling during benchmark and improves progress display
  - Web interface: Display performance and revenue information per group
  - Web interface: The miner list will not automatically expand all groups if there are multiple groups and a larger number of miners.
  - Web interface: Improvements to miner list when viewing from mobile device
 Mining software
  - Adjusted Phoenix Miner to use PROTO 1 by default for ProgPow (BCI) mining
  - CpuMiner-Opt 3.9.0.1
  - TT-Miner 2.2.4
  - Gminer 1.44
 Corrections
  - Correction to power usage reporting for systems with a mix of nVidia GPU's based on TCC and WDDM
  - Correction to how processes running with Admininstrator privileges are closed
  - Correction to Claymore Ethereum and Phoenix Miner wallet address parameter to ensure it's not empty


To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.

Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

I will make an update to the next release to include Additional Power if the trigger is configured to look at the entire miner power usage. I will also make another small change that might improve the speed a bit, but I cannot tell if it will improve in your scenario as well.

The trigger should be able to fire from the point where you start to see the GPU's in the GPU tab. How fast the GPU's show up here will depend on how fast the API of the mining software is to start up - for some mining software it takes a little longer time.

Hey Patrik,

no. My power-rules trigger only after minutes, not seconds. On running miners and on fresh started, its all the same. Any idea why I have such delay? I disabled the log, but even with logging it seems not to be faster. Is there any difference between the used mining software? For me all looks the same, but right now I just only using Trex, TRM and CryptoDredge.

Its nothing dramatically, its working and thats great. But maybe you have a settings in mind what can affect this. But can you add the additional power too?

It's supposed to be more or less instant, but it will not trigger until the API to the mining software is connected. I do get this power trigger to fire in 10 - 20 seconds from when the miner is started.

The Additional Power is however not added. Can you see if you get the trigger to run correctly with this in mind? Thanks!

Hey Patrik,

I upgraded some rigs and just wanted to test the newer Wattage rules. They seems to work, but they only trigger after a few minutes on all relevant rigs together, not instant.

For example: I set 4 rules to 4 rigs, each with a stupid trigger which will force the rule to be activated instant (like >100W, <5000W,...). After clicking OK, nothing happens. But after a few minutes, all 4 trigger will be activated at the same time. Tested with admin rights, without, on differents rigs (Iam using Win10 on all). But its always the same picture.

Is there a trick to force the trigger to be instant?




Edit: Is it possible that you dont add into calculation (Device Power Rule -> Compare with miner total power usage) the additional power in the Profit Profile Properties / Power and Cost?

I just wanted to give an update on this. Your observations were correct when mixing TCC and WDDM GPU's and looking at the reported Power Usage. A correction will be implemented in the next release.

Thank you for quick reply and Service was not running, started it and all works now! Big thanks once again Patrike

Can you please send me log file via the toolbar Tools -> Log File menu. If you use Remote Agent, please provide the Remote Agent log file, otherwise the Awesome Miner log file. Please send via mail or link in PM. Thanks!

Can you also check if "IntelliBreeze Software Maintenance Service" is running in the Windows Services dialog? You can access it via Start menu ->Run: services.msc

The device order is based on the order returned by the GPU drivers. I can include PCI Bus ID in the next update.

The plan is also to improve the entire concept of GPU mapping as there are a number of cases where Awesome Miner actually would be able figure this out for you.