Hi Patrike,
Is there a way to give more details for "dead device detection" for gpu mining rigs? I'd like to know which gpu died. Thanks.
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 168. (Read 703563 times)
May 31, 2019, 05:56:41 AM
May 31, 2019, 04:31:44 AM
Hello Patrike, I would like to remind you to see if you could make a dark theme for the desktop version of the program.
I'm very busy at night with the computer, I have the MAC with a dark theme, I have Chrome with an extension to see everything in the dark, but when I enter the remote machine and see AM I burn my eyes with so much white at 5 a.m. morning...
I know that this function is for WEB because it is easier, but I hope you have it in consideration to make a darker or gray option with less white.
ALREADY willing to remember. in Statistics that we see what was mined yesterday, in several days, etc ... I would like to know in 24 hours if a SOMETHING has been 50% of the time, to know how many changes it has made and the average time it is mining in each change.
This will help a lot to know which are annoying coins that enter a moment and fall fast.
I fully understand your point about a dark theme for the Windows app as well. I've received a few requests about this so it has not been forgotten and the plan is to make it happen in a not too distant future. It will first of all be the Miners tab, Coins tab and so on that will get a darker theme - not every single dialog you can find in the application.I'm very busy at night with the computer, I have the MAC with a dark theme, I have Chrome with an extension to see everything in the dark, but when I enter the remote machine and see AM I burn my eyes with so much white at 5 a.m. morning...
I know that this function is for WEB because it is easier, but I hope you have it in consideration to make a darker or gray option with less white.
ALREADY willing to remember. in Statistics that we see what was mined yesterday, in several days, etc ... I would like to know in 24 hours if a SOMETHING has been 50% of the time, to know how many changes it has made and the average time it is mining in each change.
This will help a lot to know which are annoying coins that enter a moment and fall fast.
I also have a number of notes about improved statistics as well, including the points you bring up. Thanks for all feedback!
May 31, 2019, 04:25:20 AM
SRBMiner exit is graceful as in the miner exits after shutting down the miner threads.
Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Awesome Miner is sending the same close events to all mining software.Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Are you running TeamRedMiner as Administrator? That's a scenario where it can be more difficult to get the mining software to terminate in a nice way. I will investigate that a bit more.
Is this miner fee you are referring to a dev fee for mining software/firmware or more of a hosting fee for your miners? I assume it's specific to the miner and not to the pool.
In the Profit Profile Properties, Power and cost section, you can configure additional costs per miner, but it's currently only a fixed fee or additional power usage - not a percentage.
Thanks for all feedback!
No, running the miner without admin privilages.
Yes, im referring to the dev fee for using the miner.
eg, SRBMiner and TeamRedMiner have many common algos, but the dev fee for SRB is 0.85%, for TRM is 2.5% huge selection difference.
Saving the TRM hashrate as 100kh/s for an algo makes less logic, when the actual is 97.5kh/s.
Awesome Miner do have a behavior to kill the mining process if it didn't resond to the first request to shutdown. Maybe you can increase the time Awesome Miner will wait to see if TeamRedMiner just needed a bit more time to close down in a nice manner? Increase the value of: Options -> Mining Settings -> Wait for process before terminating.
Thanks for describing the case about dev fee as well. Awesome Miner doesn't have any feature today to do this on a mining software basis. Some mining software also have different dev fee depending on algorithm.
May 30, 2019, 09:13:48 AM
Hello Patrike, I would like to remind you to see if you could make a dark theme for the desktop version of the program.
I'm very busy at night with the computer, I have the MAC with a dark theme, I have Chrome with an extension to see everything in the dark, but when I enter the remote machine and see AM I burn my eyes with so much white at 5 a.m. morning...
I know that this function is for WEB because it is easier, but I hope you have it in consideration to make a darker or gray option with less white.
ALREADY willing to remember. in Statistics that we see what was mined yesterday, in several days, etc ... I would like to know in 24 hours if a SOMETHING has been 50% of the time, to know how many changes it has made and the average time it is mining in each change.
This will help a lot to know which are annoying coins that enter a moment and fall fast.
I'm very busy at night with the computer, I have the MAC with a dark theme, I have Chrome with an extension to see everything in the dark, but when I enter the remote machine and see AM I burn my eyes with so much white at 5 a.m. morning...
I know that this function is for WEB because it is easier, but I hope you have it in consideration to make a darker or gray option with less white.
ALREADY willing to remember. in Statistics that we see what was mined yesterday, in several days, etc ... I would like to know in 24 hours if a SOMETHING has been 50% of the time, to know how many changes it has made and the average time it is mining in each change.
This will help a lot to know which are annoying coins that enter a moment and fall fast.
May 30, 2019, 09:09:20 AM
SRBMiner exit is graceful as in the miner exits after shutting down the miner threads.
Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
using the profit of the currency, if a pool charges 2% you change the 1, by 0.98 and you have already removed the commission.
I recommend that you measure all the pools and coins, because many times you send 100MHS but the Pool receives 92 MHS, and that has an impact on the profit.
The best way is to mine the currency against the pool for 3 or 4 hours. Take day currency estimates in AW, get the average, get the estimate of 4 hours, and then see how much the pool actually gave. With those two figures and a simple calculation, you can know what the EXACT profit is. You will be surprised to see that in many currencies the profit is 0.85 or less, some 0.60. If you do not make these measurements you go blind, believing in the numbers they give you.
By the way, I use NEthash, difficulty, reward, etc .. all dynamic data searched in the explorer, is the most accurate way to measure a currency / pool.
May 30, 2019, 08:35:12 AM
SRBMiner exit is graceful as in the miner exits after shutting down the miner threads.
Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Awesome Miner is sending the same close events to all mining software.Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Are you running TeamRedMiner as Administrator? That's a scenario where it can be more difficult to get the mining software to terminate in a nice way. I will investigate that a bit more.
Is this miner fee you are referring to a dev fee for mining software/firmware or more of a hosting fee for your miners? I assume it's specific to the miner and not to the pool.
In the Profit Profile Properties, Power and cost section, you can configure additional costs per miner, but it's currently only a fixed fee or additional power usage - not a percentage.
Thanks for all feedback!
No, running the miner without admin privilages.
Yes, im referring to the dev fee for using the miner.
eg, SRBMiner and TeamRedMiner have many common algos, but the dev fee for SRB is 0.85%, for TRM is 2.5% huge selection difference.
Saving the TRM hashrate as 100kh/s for an algo makes less logic, when the actual is 97.5kh/s.
May 30, 2019, 08:24:58 AM
Awesome Miner version 6.5
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
GPU mining
- Native overclocking supports fan/temperature curve for AMD
- Native overclocking includes better fan support for AMD Vega
- Native overclocking supports Reset command to be added to a clocking profile
- Clocking profiles can be added and modified in a more flexible way via the Options dialog, GPU Clocking Profiles section
- Added diagnostics support for mining software running with Administrator privileges
- Added X25x algorithm
Features
- The Mining history dialog includes a feature to export the data to a text file
- The Mining history dialog includes hashrate information per miner
- The application taskbar icon can be highlighted if there are active notifications. Configurable in the Options dialog, Notifications section.
- Copy and paste of hashrate, power usage and software selection between profit profiles
- Exchange filtering allows user defined exchanges to be specified in case the exchange name isn't found in the predefined list
Integration
- Added Block Explorer for JEM
API
- Include the property Exponential Factor for a coin in the API api/coins/stats.
Rules
- Device power usage trigger has been updated to take user defined additional power per miner into consideration when the trigger condition is for an entire miner
User interface
- Include PCI Bus ID on the GPU mapping page
- Benchmark window allows scrolling during benchmark and improves progress display
- Web interface: Display performance and revenue information per group
- Web interface: The miner list will not automatically expand all groups if there are multiple groups and a larger number of miners.
- Web interface: Improvements to miner list when viewing from mobile device
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Adjusted Phoenix Miner to use PROTO 1 by default for ProgPow (BCI) mining
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.3
- CpuMiner-Opt 3.9.0.1
- TT-Miner 2.2.4
- Gminer 1.44
- Nanominer 1.3.2, including adjustment to Ethereum hashrate unit
- T-rex 0.11.0
- XmRig 2.14.4
Corrections
- Correction to power usage reporting for systems with a mix of nVidia GPU's based on TCC and WDDM
- Correction to how processes running with Admininstrator privileges are closed
- Correction to Claymore Ethereum and Phoenix Miner wallet address parameter to ensure it's not empty
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
GPU mining
- Native overclocking supports fan/temperature curve for AMD
- Native overclocking includes better fan support for AMD Vega
- Native overclocking supports Reset command to be added to a clocking profile
- Clocking profiles can be added and modified in a more flexible way via the Options dialog, GPU Clocking Profiles section
- Added diagnostics support for mining software running with Administrator privileges
- Added X25x algorithm
Features
- The Mining history dialog includes a feature to export the data to a text file
- The Mining history dialog includes hashrate information per miner
- The application taskbar icon can be highlighted if there are active notifications. Configurable in the Options dialog, Notifications section.
- Copy and paste of hashrate, power usage and software selection between profit profiles
- Exchange filtering allows user defined exchanges to be specified in case the exchange name isn't found in the predefined list
Integration
- Added Block Explorer for JEM
API
- Include the property Exponential Factor for a coin in the API api/coins/stats.
Rules
- Device power usage trigger has been updated to take user defined additional power per miner into consideration when the trigger condition is for an entire miner
User interface
- Include PCI Bus ID on the GPU mapping page
- Benchmark window allows scrolling during benchmark and improves progress display
- Web interface: Display performance and revenue information per group
- Web interface: The miner list will not automatically expand all groups if there are multiple groups and a larger number of miners.
- Web interface: Improvements to miner list when viewing from mobile device
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Adjusted Phoenix Miner to use PROTO 1 by default for ProgPow (BCI) mining
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.3
- CpuMiner-Opt 3.9.0.1
- TT-Miner 2.2.4
- Gminer 1.44
- Nanominer 1.3.2, including adjustment to Ethereum hashrate unit
- T-rex 0.11.0
- XmRig 2.14.4
Corrections
- Correction to power usage reporting for systems with a mix of nVidia GPU's based on TCC and WDDM
- Correction to how processes running with Admininstrator privileges are closed
- Correction to Claymore Ethereum and Phoenix Miner wallet address parameter to ensure it's not empty
May 30, 2019, 08:23:03 AM
SRBMiner exit is graceful as in the miner exits after shutting down the miner threads.
Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Awesome Miner is sending the same close events to all mining software.Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Are you running TeamRedMiner as Administrator? That's a scenario where it can be more difficult to get the mining software to terminate in a nice way. I will investigate that a bit more.
Is this miner fee you are referring to a dev fee for mining software/firmware or more of a hosting fee for your miners? I assume it's specific to the miner and not to the pool.
In the Profit Profile Properties, Power and cost section, you can configure additional costs per miner, but it's currently only a fixed fee or additional power usage - not a percentage.
Thanks for all feedback!
May 30, 2019, 05:24:30 AM
SRBMiner exit is graceful as in the miner exits after shutting down the miner threads.
Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
Can u forward proper exit commands to TeamRedMiner as well, cause the miner is abruptly killed without allowing it to shutdown the miner threads.
Feature Request:
Miner fee -> most benchmarks and hashrates are before the miner fee is deducted, is there a way in which u can add the miner fee to the hashrate chart for accuracy.
Eg. miner A has 100mh @ 0% fee => 100mh, but miner B has 101 mh @ 5% fee => 95.95mh, Awesome miner selects B as the better miner cause miner fee is not taken into account.
In my profit profiles, i have manually adjusted the hashrate with different fee for each miner, would be nice to see awesome miner natively support this.
May 30, 2019, 04:45:44 AM
Just started mining Ryo and the profit is showing $0.00 but it's mining ok (hash rate is 7.4 kh/s)
It looks like it's removed from CoinCalculators.io main listing due to low volume.You can manually add it back via the Options dialog, Statistics Provider section, where you can add a CoinCalculators JSON URL:
https://www.coincalculators.io/api.aspx?name=ryo
May 29, 2019, 08:36:21 AM
Just started mining Ryo and the profit is showing $0.00 but it's mining ok (hash rate is 7.4 kh/s)
May 29, 2019, 04:09:17 AM
Version 6.4.5 (Development preview of 6.5)
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
Good afternoon. automatic agent update does not work.
There are no logs in the new Claymore.
1) If the automatic update fail you can try to manually use the link above to upgrade. If it still doesn't work because of the uninstallation process, you can force the uninstallation using this tool from Microsoft:
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed
2) If you run Claymore miner with Administrator privileges, Awesome Miner should still be able to show the log on the Console tab. The log file is also written to the file 'console_output.txt' located in the same folder as the Claymore software.
1) If I click "Upgrade Remote Agent" is upgrade previous version
2) Yes, but Claymore Old logs are not saved
1) I would actually recommend a reboot of this remote computer to begin with. In case there are pending Windows Updates to be installed on next reboot, these can prevent other installers from running correctly.
If this didn't solve the problem, please uninstall Remote Agent manually and then install it again using the links above.
2) Right now the log file will only contain the latest log of the most recently started Claymore process. Once you start the process the next time it will clear the log. This behavior cannot be changed in Awesome Miner right now.
May 29, 2019, 03:20:38 AM
Version 6.4.5 (Development preview of 6.5)
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
Good afternoon. automatic agent update does not work.
There are no logs in the new Claymore.
1) If the automatic update fail you can try to manually use the link above to upgrade. If it still doesn't work because of the uninstallation process, you can force the uninstallation using this tool from Microsoft:
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed
2) If you run Claymore miner with Administrator privileges, Awesome Miner should still be able to show the log on the Console tab. The log file is also written to the file 'console_output.txt' located in the same folder as the Claymore software.
1) If I click "Upgrade Remote Agent" is upgrade previous version
2) Yes, but Claymore Old logs are not saved
May 29, 2019, 03:07:46 AM
Version 6.4.5 (Development preview of 6.5)
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
Good afternoon. automatic agent update does not work.
There are no logs in the new Claymore.
1) If the automatic update fail you can try to manually use the link above to upgrade. If it still doesn't work because of the uninstallation process, you can force the uninstallation using this tool from Microsoft:
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed
2) If you run Claymore miner with Administrator privileges, Awesome Miner should still be able to show the log on the Console tab. The log file is also written to the file 'console_output.txt' located in the same folder as the Claymore software.
May 28, 2019, 12:27:35 PM
Version 6.4.5 (Development preview of 6.5)
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
Good afternoon. automatic agent update does not work.
There are no logs in the new Claymore.
May 28, 2019, 12:10:46 PM
Describe in more detail what it means - Administrator mode in native overclocking?
and how is it different from the usual?
and how is it different from the usual?
I believe that he had mentioned that the newest NVidia drivers require administrative privileges to overclock some operations such as power and temperature.
ref: https://bitcointalksearch.org/topic/m.51144529
May 28, 2019, 11:50:42 AM
Describe in more detail what it means - Administrator mode in native overclocking?
and how is it different from the usual?
and how is it different from the usual?
May 28, 2019, 04:47:37 AM
Version 6.4.5 (Development preview of 6.5)
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
ASIC mining
- Feature to display MAC address of External Miners without using ARP cache. Can be enabled via the Options dialog, Mining Settings section.
Integration
- Added Block Explorer for JEM
User interface
- Web interface: Sorting by column in the miner list
- Web interface: Better column width used for notifications
Mining software
- Claymore Ethereum Miner 14.6
- Z-enemy miner 2.0
- SrbMiner 1.8.9
- WildRig Miner 0.17.2
To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates.
Direct download links if needed:
https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
May 27, 2019, 09:12:53 AM
If a coin is found to be most profitable on an exchange that is not yet in the exchange list, the coin tab will report a valid value, the missing exchange, and daily earnings; however, it will be grayed out and never auto-switch to that coin.
Is there any way to make the exchange list dynamic against the statistic provider's list so that new exchanges are added automatically? This way, the app itself would not need to be updated on each new exchange that pops up.
For an example, XRD uses citex.co.kr and remains grayed out since it has not been included in the exchange list as of yet.
Thank you and keep up the great work.
There are no feature for this today but it's a good point.Is there any way to make the exchange list dynamic against the statistic provider's list so that new exchanges are added automatically? This way, the app itself would not need to be updated on each new exchange that pops up.
For an example, XRD uses citex.co.kr and remains grayed out since it has not been included in the exchange list as of yet.
Thank you and keep up the great work.
Thanks for the nice feedback as well
May 26, 2019, 07:40:21 AM
If a coin is found to be most profitable on an exchange that is not yet in the exchange list, the coin tab will report a valid value, the missing exchange, and daily earnings; however, it will be grayed out and never auto-switch to that coin.
Is there any way to make the exchange list dynamic against the statistic provider's list so that new exchanges are added automatically? This way, the app itself would not need to be updated on each new exchange that pops up.
For an example, XRD uses citex.co.kr and remains grayed out since it has not been included in the exchange list as of yet.
Thank you and keep up the great work.
Is there any way to make the exchange list dynamic against the statistic provider's list so that new exchanges are added automatically? This way, the app itself would not need to be updated on each new exchange that pops up.
For an example, XRD uses citex.co.kr and remains grayed out since it has not been included in the exchange list as of yet.
Thank you and keep up the great work.
Jump to: