Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 276. (Read 703148 times)

Please tell me what is better to set the time for the parameter -- Switching interval (minutes). If the farm consists of ASIC S7, S9, D3, L3. Thank you in advance.

hard to make of which settings details are wrong on your side, but I have mmine working, and the following are set

pool: stratum+tcp://bci.suprnova.cc:9166
Worker name: username.workername (MPOS like MPH, create a worker on bci.suprnova.cc if needed)
Worker password: (optional I believe, just leave default "x" if you want)
Coin: BCI (I think WhatToMine has it in its API, ID: 245)

Options -> Algorithms -> ProgPow checked

Options -> Managed Software -> ProgPoW Nvidia Miner -> make sure ProgPow is enabled

Profit Profile (Applicable) -> Mining software priority list -> ProgPoW Nvidia Miner Checked

Profit Profile -> Customize -> ProgPow in Algorithm checked

(Optional) Profit Profile -> Algorithm specific settings -> Mining Software -> ProgPoW Nvidia Miner (default Priority via Priority list supposed to be fine but just in case)

I suspect one of the last 3 steps might be incorrect on your end or your settings at the pool needs to be checked.

Please can someone help me to be able to mine with Progpow, at least to be able to make a benchmark by mining a coin. I have tried BCI with the address of a "walllet" installed.

I have chosen the right miner propgprow nvidia miner. All apparently correct. Both in normal pools and in Suprnova. It gives me a mining error. It does not start, it says that I must choose the right miner, and he is chosen.

I have gone to managed Software and put it as Enabled to propgpow in its miner, although by default it should already be. The error is that neither stops, gives a direct error like that I have not chosen miner. This marking, everything is fine

What am I doing wrong?

+1 for sxemini


I use the same software for busrt mining too.
I have to kill the agent and open it has administrator to be fine. I tried with scheduled task and in a shortcurt run as admin and put it in startup but that doesn't work. Must be run it manually if I rebooted the computer.

Thanks

Francis

Hi Patrike,

how can i start a generic miner with admin privileges? I monitor my Burstminer with Awesomeminer and i can see in the console tab the burstminer console.
But the newest version need admin privileges to start.

I use this verion of Blagominer:
https://github.com/JohnnyFFM/blagominer/releases

I hope it is possible.



@zaqwsx

You must delete some files manuel, also in the registry to reinstall the awesomeminer remote agent. I have this Problem 3 times this year.

Hello Patrike,

Can you please provide me a link to "AwesomeMinerRemoteService.msi" version 5.5.1

I've delete it by mistake and cant upgrade / update to the newer version without it.

The "Upgrade remote Agent" function doesn't work.

And if there is a password for access to Windows customers will not be able to get to download the miner?

Hi,

can you add $BCD - @BitcoinDiamond to coins/algos, please? It is running on Zergpool already.

Thanks a lot for really brilliant support
M.

I think in your scenario, you can consider toning down the Profit Switching threshold and then use below instead

Options -> Pools -> (Your Monero Pool) -> Advanced

Profit Factor 0 - 1 (0% to 100%) (for example, 0.85, so Monero has to be at least 15% + profit switching % more profitable than ETH b4 your miner switches to it)

***
PS. Btw, I wouldn't recommend you to try those random miners that popped up in this forum as of late, especially the self moderated newbie miners threads where descriptions are all the same (mountainminer, terracotta, barracuda, moon....etc whatever the name comes up with, hell, someone even trying to impersonate JCE Miner's thread. I commend you for the bravery for trying them, but that is quite risky IMHO.

Can you make a priority coin ?
This means, that always mine priority coin - ether, only if some other coin in group have xx % higher profit. Now mine xx% in + and -..
I want allways mine ether , only if some other coin have more then 20% more profit.

Example.... i have i group 2 pool, ether and moreno. Profit switch i set to 20%. When i start have ether higher profit so its a start with ether.
Over time monero becomes 20% more profitable, so start mine monero. Profitable of monero falling down, now is profit same monero and ether...monero fall down for more19%
and still mine monero not ehther!!.... me.... and in this scenario you can mine long time.. with 19% minus profit...... I hope you understand

WildRig Multi 0.11.6 Beta is Becoming Even More Useful Multi-algorithm Miner

Hi Patrike,

Can you add block explorers for wallet balance for coin Metaverse ETP in the next release?

Thanks!

Thanks for the update. I actually made a small change to the latest development release to handle the scenario if "nicehash.com" was missing from the "Nicehash domain matching" field, Awesome Miner still could match it. At the time, I didn't know if this was the problem in your case, but it was a more fail-safe way of doing it. Great that it's working better now!

Thanks, I wasn't experiencing this issue with just nicehash, some algos on other pools also reported $0, I posted an earlier screenshot displaying this.

The latest beta release fixed my issue but interestingly I had miningpoolhub.com in that "Nicehash domain matching", I have changed it to nicehash.com

Yesterday I wrote in to my datalogging/management software to calculate profit based on pool api responses instead of awesome miner so I will have to swap all that back

Yes. I noticed that is was released today and it will be included in the next update.

Hi Patrike,

can you update Phönixminer to 3.5 in the next release?

Awesome Miner Version 5.5.2 (Development preview of 5.6)

 ASIC mining
  - All SSH and Antminer operations are supported via the Remote Proxy when using a large number of ASIC miners
  - More fail safe parsing of pool information from Antminers with custom firmware where invalid pool entries are returned
  - Upgrading the version of Remote Proxy via Awesome Miner made possible in the same way a Remote Agent can be upgraded
  - Improved Auto Discovery of miners via Remote Proxy
 GPU mining
  - Benchmark dialog improved to show the hashrate in gray if the mining software didn't have the highest hashrate value compared to other software
  - Benchmark includes power usage for some nVidia based mining software (e.g. ccminer)
  - Remote Agent on Linux can be configured with a password using the command line /setpassword=mypass
  - When mining with EWBF Equihash Miner, the parameter '--pers auto' will no longer be added by default. It will only be added when mining on Zergpool.
 Configuration
  - Increase maximum allowed value for the profit switching setting for minimum pool time
  - The Dashboard will by default show the number of ASIC miners in the ASIC section, instead of the total number of ASIC sub devices. To change back to previous behavior, go to the Options dialog, Dashboard & History section.
 User interface
  - Profit profile Properties dialog improved with new selection options for the list of mining software
  - Display miner API identifier on the summary tab. This is the unique identifier for the miner when accessed via the Awesome Miner HTTP API.
 Rules and API
  - Profit Profile can be set for a miner using the Awesome Miner HTTP API
  - Added Coin Trigger for detecting coin difficuly, network hashrate and exchange rate
 Mining software
  - Added mining software: ProgPow Miner 0.15 for AMD and nVidia
  - Added mining software: EthMiner 0.16.0 rc1 for AMD and nVidia
  - T-Rex miner 0.6.6
  - Z-enemy miner 1.20
  - JCE CPU Miner 0.32m
  - SgMiner-gm 5.5.5
  - SgMiner-kl 1.0.6
  - Bminer 10.3
 Corrections
  - Correction to Remote Agent on Linux where the path wasn't set correctly when starting mining software
  - Correction to profit switcher where a change to Sgminer didn't work under certain conditions
  - Minor corrections

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates

Direct download links
http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Thanks for sharing the information.

On almost all recent Antminers the default SSH username / password is root / admin. This is probably applicable for 99.9% of all Antminers. There have been a few instances in the past where it turned out that this wasn't the default.

It should be possible to configure the path to mining software via the Options dialog, Managed Software section. Instead of a download URL starting with "http", you can specify a Windows file share like "\\somecomputer\Ccminer-something-1.0.zip". The result is that all Remote Agents will use this file share to get the ZIP file.

If I still mined, I would use this. Too bad I can't make any money anymore, the difficulty is too high these days Tongue