[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 325.

vegasguy

legendary

Activity: 1610

Merit: 1003

"Yobit pump alert software" Link in my signature!

Hi some suggestions to make awesome miner, even more awesome.

Always have the software check for api access on Antminers every time there is a change. Its a pain to go in each time and set up api access each time I make a change in the miner.

I know awesome miner is heavily marketed towards GPUS , but what about us asic farm owners? Could you PLEASE add in a few more multipools? With just a few in the list the profits are really bad. $2-3 a day for an L3+ Sad

Here are some ideas:

Multipool.us
https://pool.gigarho.com/ (582 miners as I write this)
Hash2coins.com (1200+ miners). 1100 Ghs of scrypt.

I do support you. Just upgraded to enterprise.

You guys are truly "awesome"!!

Vegas

Radar5k

newbie

Activity: 11

Merit: 0

Hey Patrike,

Quote from: patrike on June 20, 2018, 08:27:56 AM

Quote from: nadeaup on June 20, 2018, 05:16:51 AM

@patrike any chance of a linux agent in the near future or a partnership with SMOS?

The work to make Remote Agent running on Linux has recently started, but it's not a small implementation task. Expect that it will be a number of months before the first version is ready because there are many other priorities as well.

Have you looked at Mono?
They say that it only requires minor changes to go from .NET to Mono, though, me not being a coder, I have no idea just how minor their "minor" is.

Take care,
&
Have fun!
Radar5k =8^)

Allo-4ka

newbie

Activity: 71

Merit: 0

Patrike

Not the first time I notice that one coin is read from different calculators, and as a result leads to the fact that the profit varies ...
Also on coincalculators .io, the coin is displayed as (mzc), and the coinwarz .com is displayed as (maza)

Code:

http://images2.imagebam.com/7c/0d/a7/a0446e902270794.PNG

DumaxFr

newbie

Activity: 49

Merit: 0

Quote from: Kronny on June 22, 2018, 03:33:15 AM

Hi Patrike, are u planning something for ETHLargement? Grin

Just launch it outside of AM oO

JCE-Miner

member

Activity: 350

Merit: 22

Quote from: sxemini on June 22, 2018, 03:52:14 AM

Hi Patrike,

i integrate JCE Miner as XMR-Stak miner, because JCE has a command for XMR Stak api (--stakjson) and now i get the hashrate on Awesomeminer.

Here is my commandline that i have set in managed miner properties:

--mport 4028 --stakjson -p x -o eu.turtlepool.space:3333 -u *WALLET* --auto

At this state i can´t switch the Pool via Awesomeminer because it is fix when i choose XMR Stak.

If you need more informations, i will help you.
At the weekend i will test more.

Fine, and thank you for integration!
I write to warn that JCE 0.29d has a regression on JSON output in non-stak (native) format, so if you dev, stay on stak json mode or wait for 0.29e that will fix it.
Also starting from that version, you'll get maximum hashrate in addition to the instant hashrate, in case that's a field you need.

edit: JCE 0.29e available, json fixed.

seano1234

newbie

Activity: 1

Merit: 0

Quote from: CreamyG31337 on June 20, 2018, 05:12:10 AM

Quote from: patrike on June 20, 2018, 04:54:57 AM

Quote from: CreamyG31337 on June 20, 2018, 04:50:44 AM

Quote from: patrike on June 20, 2018, 04:08:10 AM

Quote from: Larvitar on June 19, 2018, 08:03:19 AM

@patrike
Again about CN, but with JCE-Miner:
I'm able to run JCE as cpuminer-opt, it can auto-switch for best coin at moment. But API isn't working in Awesome. If I access the APU adress/port into web browser I see everyting okay. Can you add support for JCE-Miner API?

You can see the discussion/errors ehere: https://bitcointalksearch.org/topic/m.40417916

JCE-Miner's dev is working in GPU support with great performance (mainly for old GPUs, but the Polaris results are good too). I think could be awesome to add it for Awesome (lol).

Thanks a lot!

I've received a few requests for support this one so I will take a closer look once I get a chance. Thanks for your suggestion.

Well, it doesn't even HAVE an API so don't waste your time. What would be nice is if you add a feature to awesome miner, a new compatibility mode - "command line only" and just try to pass the basic connection info in that case.

I've not had a change to test it myself, but in their first forum post, in the section "Third Party integration" there is an example of an API response:
https://bitcointalksearch.org/topic/xmr-jce-miner-cryptonightforks-now-with-gpu-3281187

There is a feature in Awesome Miner called Generic Miner, where you have to specify the full command line and everything yourself:
http://www.awesomeminer.com/help/genericminer.aspx
With a Generic Miner you will not get any hashrate or revenue information, but at least it let's you use Awesome Miner to start and stop the mining, and if the mining process is crashing, Awesome Miner will automatically restart it.

Ahh, okay cool, I didn't see that API info on their github page. My bad.

I am fine entering all the connection info by hand, I'm just saying that most mining software understands -o -u -p
For example, if awesome miner would simply not pass -b parameter to crypto dredge miner, it would work 100% switching pools and algos, but there's no way to achieve this. It would be perfect if we could just tell awesome miner the mapping of commands to use instead of relying on you to investigate and release a new version for each new mining program to be controlled. Just a suggestion.

I don't know what the deal is with the bitcoinz stats coming form coincalculators, but the profit estimate is very close to 0. Maybe you can fix that somehow or let them know if something is wrong on their end...

I am happy when cryptodredge becomes available in the next version. Grin

https://cryptodredge.org/

yrk1957

member

Activity: 531

Merit: 29

Hi Patrike,

I have a IBelink DSM6T based upon cgminer. I can connect to it fine using AM but it does not show 5s hash-rate, which results in calculated revenue to show up as 0. The Avg value shows up fine.

This is what API report shows:

Code:

"SUMMARY": [
{
"Elapsed": 2041,
"MHS av": 5854.57,
"MHS 5s": 0.0,
"Found Blocks": 0,
"Getworks": 84,
"Received": 2864348.0,
"Accepted": 7981,
"Rejected": 16,
"Hardware Errors": 23736,
"Utility": 234.66,
"Discarded": 144,
"Stale": 0,
"Get Failures": 1,
"Local Work": 45763,
"Remote Failures": 0,
"Network Blocks": 6,
"Total MH": 0.0,
"Work Utility": 83519.73,
"Difficulty Accepted": 2665546.91804759,
"Difficulty Rejected": 160.0,
"Difficulty Stale": 0.0,
"Best Share": 4798498,
"Device Hardware%": 0.8287,
"Device Rejected%": 0.0056,
"Pool Rejected%": 0.006,
"Pool Stale%": 0.0,
"Temp1": 32.88,
"Temp2": 34.5,
"Temp3": 37.12,
"Temp4": 39.62,
"Temp5": 45.38,
"Temp6": 43.0,
"Temp7": 40.5,
"Temp8": 37.5,
"Temp9": 39.5,
"Temp10": 46.12,
"PLL": 800,
"PWM": 9500,
"VOLTAGESET": 0,
"VOLTAGE": 128,
"FPGAVer": "180518",
"Hash Method": "blake256"
}
],

Can you help with this? If possible, show revenue based upon Avg instead of 5s?

Note that the cgminer API is running on port 4029 instead of the default 4028.

Thanks.

sxemini

member

Activity: 1558

Merit: 69

Hi Patrike,

i integrate JCE Miner as XMR-Stak miner, because JCE has a command for XMR Stak api (--stakjson) and now i get the hashrate on Awesomeminer.

https://abload.de/thumb/jcemckm3.jpg

Here is my commandline that i have set in managed miner properties:

--mport 4028 --stakjson -p x -o eu.turtlepool.space:3333 -u *WALLET* --auto

At this state i can´t switch the Pool via Awesomeminer because it is fix when i choose XMR Stak.

If you need more informations, i will help you.
At the weekend i will test more.

Kronny

member

Activity: 137

Merit: 10

Hi Patrike, are u planning something for ETHLargement? Grin

Philopolymath

sr. member

Activity: 558

Merit: 295

Walter Russell's Cosmogony is RIGHT!

well shit that was a fast fix...thank you
you are obviously NOT a politician or federal employee.

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 5.2.2

- CastXMR 1.2.5 with Cryptonight-Fast support
- BMiner 9.0
- Correction to profit switcher for the scenario where Bminer is used and both Equihash and Ethereum is enabled
- Correction to hash rate unit adjustments for a few Dragonmint based ASIC miners
- Correction to Mining Dutch pool profit factor
- Minor corrections

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: nadeaup on June 21, 2018, 09:31:24 PM

Quote from: Philopolymath on June 21, 2018, 08:37:29 PM

How can I DOWNGRADE
I just upgraded to 5.2.1 BUT NOW have no temp readings on any of my Dragonmints! B52's & B29's
they also don't report the profit/day correctly anymore

They are aware, and said they will fix it.

There will very soon be a 5.2.2 release to correct this.

What's difficult with some specific Dragonmint and Innosilicon miners is that they provide very little information about what kind of miner it is. An Antminer is presenting itself as "Antminer L3" for example, making it very easy for Awesome Miner to know that for this specific miner, the ASIC is reporting the hashrate with a factor 1000 times too high and can adjust that.

There are a number of Antminers and a few Innosilicon miners that reports hashrate with other units than they say. This is also the reason why when you plugin a brand new Antminer model, it might show up with a hashrate 1000 times too high, or 1,000,000 times too high. It's simply because this is what the miner is reporting. Then Awesome Miner needs to detect the model and make the adjustments to show a hashrate that is correct.

Unfortunately there was a case in 5.2 where the detection of Innosilicon A9Z (that doesn't say anything in the response that indicates that it's this miner) that also matched with two Dragonmint miners. I've made a change for that in 5.2.2 - sorry for the inconvenience.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: soothaa on June 21, 2018, 08:19:43 PM

What is this "Equihash Zero" algo that has been added? I cannot find any info on it.

Hi,
The new EWBF Equihash miner supports Equihash Zero (also called Equihash 192,7)
https://bitcointalksearch.org/topic/ewbfs-cuda-equihash-miner-06-4466962

The coin Zero (ZER) is based on this algorithm:
https://whattomine.com/coins/210-zer-equihashzero

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: trucobit on June 21, 2018, 10:57:30 AM

I have a Patrike question, it's not a request or suggestion.

In the help you say that to use Aftherburner server, in the rig you have to deactivate if you have the options to modify the Voltage. I have done that as indicated by the help.

I have the need to reduce the core voltage. That's not TPD, it's not the same, I really need to reduce the voltage a bit to make undervolt and control the temperatures of the 5 rigs inside the ventilated cabinet.

My question is. If I manually, I go to each rig and activate the voltage control and reduce the voltage a little. Is there any interference with aftherburner server or awesome ?. I guess when Awesome tells you to change TDP, CORE or MEM, it would not cause the voltage change. or if?

I suppose you can tell me before I waste my time. Thank you in advance for your response and patience.

In the end, I think that everything I ask and ask is useful information left in the forum for newcomers. I do not know if he believed me, but I read all the pages of this post.

Awesome Miner will send commands to MSI Afterburner to apply those settings you specified. It will not override any other settings you might have made in Afterburner, only those specifically you see in Awesome Miner. So I think it should be fine in this scenario.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: rudefyet on June 21, 2018, 03:16:58 PM

Skunk is the only algo showing in the benchmark dialog with z-enemy enabled. Shows supported algos all enabled/default in the managed software settings.

This is similar to what Bob-Bit answered to another question, and it's related to that you need a pool for the benchmarking.

While ccminer can benchmark algorithms without a pool, in "offline" mode, that's not supported for Z-enemy. Instead you need to go to the Options dialog, Profit switching section and make sure you enable some pools so the benchmark feature have something to work with. Can you please check if this resolves you question? Thanks!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: trucobit on June 21, 2018, 09:26:46 AM

Hello patrike, your solution works perfectly. It is even simpler, you just have to make an extra profile for each rig, just for the Clock, and the Rig to follow an extra profile only with the HASH, and with this you mount the groups you select them in each rig and everything PERFECT .

I have also created a rule that if the total of all the cards does not exceed X of estimated daily benefits, it does autoswich and all the rigs change.

Thanks for thinking about the problem, for giving me a somewhat complex solution but a real solution, waiting for a better implementation.

Thank you very much for wasting your time explaining a real solution.

Thanks for the update. Great that you found a solution that is OK.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: cost82el on June 21, 2018, 10:44:05 AM

antminer z9 mini supported?

Awesome Miner supports all Antminers so far, as they are quite similar from a monitoring point of view. Antminer Z9 mini will be supported as well, but it cannot be confirmed until someone receive the first shipment and add it to Awesome Miner.

nadeaup

jr. member

Activity: 94

Merit: 2

Quote from: Philopolymath on June 21, 2018, 08:37:29 PM

How can I DOWNGRADE
I just upgraded to 5.2.1 BUT NOW have no temp readings on any of my Dragonmints! B52's & B29's
they also don't report the profit/day correctly anymore

They are aware, and said they will fix it.

Philopolymath

sr. member

Activity: 558

Merit: 295

Walter Russell's Cosmogony is RIGHT!

How can I DOWNGRADE
I just upgraded to 5.2.1 BUT NOW have no temp readings on any of my Dragonmints! B52's & B29's
they also don't report the profit/day correctly anymore

soothaa

hero member

Activity: 1151

Merit: 528

What is this "Equihash Zero" algo that has been added? I cannot find any info on it.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 325. (Read 703512 times)