[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 322.

toptek12

member

Activity: 126

Merit: 10

Quote from: skyline_king on June 28, 2018, 11:46:44 PM

Hi, guys previous version was showing GPU temperatures, but as soon as I have updated to the last version, temperatures do not appear in miner list.

Make sure you have your miners checked off by using map to system monitoring check marked to on it's under the GPU link on the bottom window to the RIGs list on the main gui. when you updated it may have turned off sense it's off by default.

Austpool

newbie

Activity: 23

Merit: 0

Hello.

First, Love awesome miner. Have been using it for about a year.

But, i do have a little problem that is sticking it's head out.

Every now and then, a rig will stop. And in the notifications tab, it will say that the rig has stopped because of too many failed attempts to start.
Then it will give me the software and pool and algo it was trying to mine.

Thing is, The algo is not one the software can mine. it's not set to be used in the profit profile and should not even be being used for that algo....but it is and it's stopping the rig.

And it's not just one algo, it seems to be a few. but it mostly seams to be claymores dual Ethereum miner was the software when it fails.

Any ideas?

i'll get a screen grab next time it fails.

Cheers

have a screen grab, but no link to a pic site as i don't use them.

so, it says on the notification tab.

"Mining process not running and too many failed attempts to restart (Claymores' Dual Ethereum Miner, Ethereum, ZergPool [Skunkhash])"

skyline_king

sr. member

Activity: 602

Merit: 250

Hi, guys previous version was showing GPU temperatures, but as soon as I have updated to the last version, temperatures do not appear in miner list.

toptek12

member

Activity: 126

Merit: 10

Quote from: patrike on June 28, 2018, 02:44:58 PM

Quote from: toptek12 on June 27, 2018, 01:05:59 PM

I keep getting this error mining Tensority/BTM using awesome miner with Bminer even after today's awesome update., but if i use Bminer without awesome miner it works I'm able to mine BTM with a 5 card NV rig.

I'm toptek my other account was hacked and i can't get it back .

Hi,

For the moment, I think you need to define the pool url like "tensority://btm.91pool.com:9221". I will make that automatic in the next update, so it can take a standard pool URL and just make it work.

That worked thanks my bad again for reading the read me for Bminer that's in the Bminer DOCS and i totally ignored it .

toptek12

member

Activity: 126

Merit: 10

Quote from: trucobit on June 28, 2018, 04:32:17 PM

I'm having problems with the Aftherburner Remote server. On two computers that I have, it does not initialize, or if it does, but when I put the pointer on it it closes.

They are two newly formatted computers. I downloaded the suggested DLL from the Awesome help page, but it still does not work.

It does like loading, it goes out in the notification area, but when it goes to the icon, it goes and closes. As a result, I can not handle the remote.

It's all in Awesome well configured and I have it installed in the same directory on all machines

The chance gives that the two teams, yesterday one and today another, do not start, I have been trying this for several hours.

Neither pulling it directly or I clicking on the icon, it goes out in the notification area but it disappears and it does not work. The remote rigs are restarted because I can not lower the OC .....

Does anyone know how to fix this problem? , I can think that a computer is crazy, but it is happening to me in two machines ... Last versions of Aftherburner and Remote Server, and updated the DLL as it suggests in Awesome help.
It can not be that it is the only one that is experiencing this.

Video
https://www.dropbox.com/s/m6ehzewa770nxea/IMG_2278.MOV?dl=0

you may need to change the folders it's in, Ive had the same issue form time to time to fix it i put it in a new folder or renamed the folder on all my rigs then changed it in awesome miner . then it worked and stayed open i couldn't find any other way to fix it . yet .

Kind of why i wish awesome miner had it's own OC which would fix a lot and lower the over head needed to run over clocking having it all done in house so to speak .

patrike said a while back he would look into it but it would take some time which it will it's like writing new software.

trucobit

jr. member

Activity: 756

Merit: 2

I'm having problems with the Aftherburner Remote server. On two computers that I have, it does not initialize, or if it does, but when I put the pointer on it it closes.

They are two newly formatted computers. I downloaded the suggested DLL from the Awesome help page, but it still does not work.

It does like loading, it goes out in the notification area, but when it goes to the icon, it goes and closes. As a result, I can not handle the remote.

It's all in Awesome well configured and I have it installed in the same directory on all machines

The chance gives that the two teams, yesterday one and today another, do not start, I have been trying this for several hours.

Neither pulling it directly or I clicking on the icon, it goes out in the notification area but it disappears and it does not work. The remote rigs are restarted because I can not lower the OC .....

Does anyone know how to fix this problem? , I can think that a computer is crazy, but it is happening to me in two machines ... Last versions of Aftherburner and Remote Server, and updated the DLL as it suggests in Awesome help.
It can not be that it is the only one that is experiencing this.

Video
https://www.dropbox.com/s/m6ehzewa770nxea/IMG_2278.MOV?dl=0

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Allo-4ka on June 28, 2018, 01:31:51 AM

Quote from: patrike on June 27, 2018, 10:06:12 AM

I noticed that the View Details dialog (when you right click on a miner) already have the correct properties for being displayed on the correct monitor. Is that specific dialog correctly displayed in you setup as well

yes, the View "Details dialog" is displayed correctly, on the same monitor where the avesome is open. I hope until the last that the rest of the windows will someday behave as well

Quote from: patrike on June 27, 2018, 10:41:48 AM

I'm always open for suggestions about additional pools to have support for, and I do have a few requests for more pools since before as well.

Here is an excellent pool, with three algorithms (sha256 / script / X11) with servers in different countries, with a lot of coins, a user-friendly interface, as well as with bonuses (Merged Mined),
and excellent support (not advertising Grin

)
https://www.multipool.us https://bitcointalksearch.org/topic/annthe-original-multipool-scryptsha256scrypt-nx11-multipoolus-167635

I will correct the dialog positioning in the next development release. Once available, please give it a try.

I do see that multipool.us provides an API (last time I checked, I couldn't find it). I will explore if it can provide the profit info for their multi-coin pools.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Blockmunch on June 27, 2018, 11:02:26 PM

Blockmasters.co has added Keccak, Quark, and Xevan. Just letting you know in case you need to update your mining software.

More to come!

I will make the update to include these

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ?? on ??

Quote from: patrike on June 22, 2018, 12:11:02 AM

Quote from: cost82el on June 21, 2018, 10:44:05 AM

antminer z9 mini supported?

Awesome Miner supports all Antminers so far, as they are quite similar from a monitoring point of view. Antminer Z9 mini will be supported as well, but it cannot be confirmed until someone receive the first shipment and add it to Awesome Miner.

I added Z9 mini to Awesome Miner 5.1.3 and able to view detail successfully. After I "Configure API Access", it succeed and able to change Pool priority for Z9 mini. If the Z9 mini restart again, it will back to non API access and I have to "Configure API Access" again to make it work, seems like Z9 not able to retain the API access configuration after reboot. Is there any solution for this?

thanks,
ctan6611

Hi,

Please see the last section on this page, about automatic detection and configuration of API access on Antminers:
http://www.awesomeminer.com/help/antminerapi.aspx

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: toptek12 on June 27, 2018, 01:05:59 PM

I keep getting this error mining Tensority/BTM using awesome miner with Bminer even after today's awesome update., but if i use Bminer without awesome miner it works I'm able to mine BTM with a 5 card NV rig.

I'm toptek my other account was hacked and i can't get it back .

Hi,

For the moment, I think you need to define the pool url like "tensority://btm.91pool.com:9221". I will make that automatic in the next update, so it can take a standard pool URL and just make it work.

Allo-4ka

newbie

Activity: 71

Merit: 0

Quote from: patrike on June 27, 2018, 10:06:12 AM

I noticed that the View Details dialog (when you right click on a miner) already have the correct properties for being displayed on the correct monitor. Is that specific dialog correctly displayed in you setup as well

yes, the View "Details dialog" is displayed correctly, on the same monitor where the avesome is open. I hope until the last that the rest of the windows will someday behave as well

Quote from: patrike on June 27, 2018, 10:41:48 AM

I'm always open for suggestions about additional pools to have support for, and I do have a few requests for more pools since before as well.

Here is an excellent pool, with three algorithms (sha256 / script / X11) with servers in different countries, with a lot of coins, a user-friendly interface, as well as with bonuses (Merged Mined),
and excellent support (not advertising Grin

)
https://www.multipool.us https://bitcointalksearch.org/topic/annthe-original-multipool-scryptsha256scrypt-nx11-multipoolus-167635

Blockmunch

member

Activity: 728

Merit: 19

Blockmasters.co has added Keccak, Quark, and Xevan. Just letting you know in case you need to update your mining software.

More to come!

trucobit

jr. member

Activity: 756

Merit: 2

Quote from: patrike on June 26, 2018, 05:56:30 AM

Quote from: trucobit on June 25, 2018, 07:51:12 PM

PAtrike although I have been a few days without comment, just remember you please consider adding an option so that all rigs mine the same and make it easy.

The trick you told me almost always works, but if I want to change OC or Intensity, it's a tremendous mess.

regards

I've had a look at alternative options to using the profile group concept, and there is no fast solution to that I just can go ahead and implement right away. It will have to be considered and prioritized among many of the other requests I get.

For the profit profiles - isn't it just a single profile you have per GPU type, and only the single profile needs to be updated with new clocking settings in case you want to adjust the clocking settings?

I'm doing it as you suggested. A profile is divided into two, hash and core, and I use the CORE (with intensity and OC of the local miner) and the hash of the miner 3 (which I want to follow)

But it's messy. If I have to change the intensity value, I have to do it in two places, in the complete profile, and in the separate profile to maintain coherence.

I follow him without seeing the difficulty. A special group is created, a master is defined, all others follow the master, and it's over.

Thus each one could have their own profile without dividing and making strange rules.

I already tell you that I am using as you say, but it makes VERY TORPE interact and change values.

Consider creating a special group with that quality. It would not change anything else. You can automatically make all the other miners have the HASH of the MASTER, but managing would be much easier by independent.

toptek12

member

Activity: 126

Merit: 10

I keep getting this error mining Tensority/BTM using awesome miner with Bminer even after today's awesome update., but if i use Bminer without awesome miner it works I'm able to mine BTM with a 5 card NV rig.

Code:

Failed to parse the response: %!s(*stratum.RawIncomingMessage=0xc0421aa020), error: json: cannot unmarshal object into Go struct field IncomingMessage.params of type []*interface {}

Here is the diagnostics if it helps any .

it's not loading the Password like it does without Awesome after it reads five cards .. if you need that screen shot i can post it .

Code:

Initialize diagnostics (40)
Starting Diagnostics. Awesome Miner Remote Agent version: 5.2.3
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: BMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable:
C:\Users\Administrator\AppData\Roaming\AwesomeMinerService\bminer-v9.0.0-199ca8c-amd64_1\bminer-v9.0.0-199ca8c\bminer.exe -uri stratum://bm1qzl38qvt74t0ze77fvnv6rz5yxp9547d79thdjm.miner3:[email protected]:9221 -watchdog=false -api=0.0.0.0:4028 (WindowMode: ConsoleFormat, EngineType: BMiner, IsProfitMiner: False)
Configuration:

Mining Engine Process started, PID: 1836

====================================================================================================
> [INFO] [2018-06-27T14:30:39-04:00] Bminer: When Crypto-mining Made Fast (v9.0.0-199ca8c)
> [INFO] [2018-06-27T14:30:39-04:00] Watchdog has started.
> [INFO] [2018-06-27T14:30:39-04:00] Starting miner on devices [0 1 2 3 4]
> [INFO] [2018-06-27T14:30:39-04:00] Starting the management API at 0.0.0.0:4028
> [INFO] [2018-06-27T14:30:40-04:00] Starting miner on device 0...
> [INFO] [2018-06-27T14:30:40-04:00] Started miner on device 0
> [INFO] [2018-06-27T14:30:40-04:00] Starting miner on device 1...
> [INFO] [2018-06-27T14:30:40-04:00] Connected to btm.91pool.com:9221
> [INFO] [2018-06-27T14:30:40-04:00] Started miner on device 1
> [INFO] [2018-06-27T14:30:40-04:00] Starting miner on device 2...
> [INFO] [2018-06-27T14:30:40-04:00] Started miner on device 2
> [INFO] [2018-06-27T14:30:40-04:00] Starting miner on device 3...
> [INFO] [2018-06-27T14:30:41-04:00] Started miner on device 3
> [INFO] [2018-06-27T14:30:41-04:00] Starting miner on device 4...
> [INFO] [2018-06-27T14:30:41-04:00] Started miner on device 4

====================================================================================================
Stopping miner process ...
Prepare stopping Mining Software
Stopping Mining Software
Diagnostics completed

and the API

Code:

Version: 5.2.3
API command: /api/status

API command: /api/v1/status/stratum

  4
  false
  0


   -uri stratum://bm1qzl38qvt74t0ze77fvnv6rz5yxp9547d79thdjm.miner3:[email protected]:9221 -watchdog=false -api=0.0.0.0:4028
   0
   2018-06-27T18:30:38.8726519Z
   1
   853040


   Microsoft Windows 10 Enterprise
   RIG3
   true
   false
   1483
   33047
   4.7.1


   AMD Ryzen 3 1200
   4
   1


   -1
   0



   2.3773036003112793
   48.547401428222656



   2.7607400417327881
   100


   0.30675238370895386
   81.230766296386719


   0.30675238370895386
   50


   6.1349692344665527
   59.021408081054687



   -1
   0


   -1
   0





   NVIDIA GeForce GTX 1070
   true
   11
   0
   0

   -1
   0


   139
   1911.0001220703125


   405.00003051757812
   4006.80029296875


   35
   61


   2.5288581848144531
   38.154647827148438


   3120
   3295


   85
   85



   NVIDIA GeForce GTX 1060 6GB
   true
   6
   1
   1

   -1
   0


   139
   1949.0001220703125


   405.00003051757812
   4799.25


   30
   58


   2.5288581848144531
   38.154647827148438


   2966
   3059


   85
   85



   NVIDIA GeForce GTX 1080
   true
   7
   2
   2

   -1
   0


   139
   1911.0001220703125


   405.00003051757812
   5805.00048828125


   30
   56


   2.5288581848144531
   38.154647827148438


   2756
   2824


   85
   85



   NVIDIA GeForce GTX 1070 Ti
   true
   9
   3
   3

   -1
   0


   139
   1911.0001220703125


   405.00003051757812
   4006.80029296875


   32
   60


   2.5288581848144531
   38.154647827148438


   3114
   3543


   85
   85



   NVIDIA GeForce GTX 1070 Ti
   true
   10
   4
   4

   -1
   0


   139
   1911.0001220703125


   405.00003051757812
   4006.80029296875


   36
   62


   2.5288581848144531
   38.154647827148438


   2947
   3065


   85
   85




   1472339968
   2772762624



   Win 10 (C:\)
   73343000576
   119926116352




  4
  Managed
  Miner3
  true
  BMiner
  Disabled
  0
  Tensority
  5
  1000
  0
  22

  None


  true
  miner3
  Single
  -1

  4
  Single
  210
  -1
  GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100


  false

  false

  false

  false


  ConsoleFormat
  Normal

  true
  false

  false

  false

  0
  false
  0

   true
   BMiner

   Tensority
   Disabled
   false


  2018-06-27T18:30:08.2098774Z


  false


  false
  false
  -1
  Single
  false
  -1
  Single
  All

  false
  false
  btm.nv
  false
  true
  true
  true

   0
   1
   2
   3
   4

I'm toptek my other account was hacked and i can't get it back .

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner version 5.2.3 (Development preview of 5.3)

- The Managed Hosts configuration in the Options dialog has been improved to allow finding hosts without miners and a bulk edit feature to enable or disable hosts
- Added Managed Software compatibility mode 'Command Line', where no API flags are added when launching the mining software
- Increased maximum time for the rule action 'Wait'
- PhoenixMiner pool setting PROTO can be specified in the Properties dialog of a pool
- Support for using Tensority pools with Bminer
- Better detection of Innosilicon A9Z miner
- Ccminer 2.3
- XMRig CPU miner 2.6.3

Direct download links
http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ?? on ??

Why Awesome Miner doesn't have a wide pool selection, provision of all mining software’s settings and overclocking?

Awesome Miner has a number of predefined pools (see Options dialog, Profit switching section), but there can of course be room for improvements. I think what is most important is that Awesome Miner support profit information from the most popular pools. For single coin pools it doesn't add as much value as having them predefined, as the coin statistics are taken from other sources.

I'm always open for suggestions about additional pools to have support for, and I do have a few requests for more pools since before as well.

It's correct that Awesome Miner doesn't include much out-of-the-box for GPU settings and overclocking. I suppose this is a matter of priorities as well, but I fully understand your point and these are of course also areas of improvements for future releases.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Allo-4ka on June 27, 2018, 03:37:43 AM

patrike

Is it worth waiting for the correction:
1. in the display of the opening windows (settings, etc.) not on the main monitor (the main one installed in windows),
but on the same as the launched awesome?

2. Saving proportions after turning off and starting manual settings awesome

Code:

http://images2.imagebam.com/f6/38/cf/f9e05f905335094.PNG
http://images2.imagebam.com/95/1f/bc/64a613905341414.PNG

This would simplify my life at times

New ICON at the link below;)
https://yadi.sk/d/_2ZrfhxI3WoaXx

Hi,
1) I've had a few requests on this so will try to make that change quite soon. It should actually be a very small implementation effort.

I noticed that the View Details dialog (when you right click on a miner) already have the correct properties for being displayed on the correct monitor. Is that specific dialog correctly displayed in you setup as well?

2) This will be supported at some point, but probably not as fast as for the item above.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: ?? on ??

Quote from: patrike on June 26, 2018, 06:18:01 AM

Quote from: ?? on ??

on mining-dutch.nl pool we should set manually diff ? all algo say ( InEfficient, Diff might be too High )

Mining-Dutch provides multiple ports for each algorithm. Awesome Miner uses those with high diff by default, but you can go to Options dialog, Online Services to edit the Mining Dutch entries to use another port with lower difficulty. Please see their web site for details.

thanks
i edit port and its work , but when pc reboot and awesome miner open all port back to default .

Good point, I see that now. Awesome Miner tries to restore the predefined settings here. I will have to look into that and see how to redesign that behavior.

rotor77

newbie

Activity: 5

Merit: 0

dear developers. please add to the next version the lyclMiner( https://github.com/CryptoGraphics/lyclMiner/results. ) OpenCL Lyra2REv2 miner for AMD GCN GPUs. Thank you.

vegasguy

legendary

Activity: 1610

Merit: 1003

"Yobit pump alert software" Link in my signature!

Quote from: ?? on ??

Why Awesome Miner doesn't have a wide pool selection, provision of all mining software’s settings and overclocking?

This one is all your Patrike Wink

Vegas

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 322. (Read 703512 times)