Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 330. (Read 703512 times)

What you say, if it can be done but you lose all the statistics for each rig, in coins per day or performance.

You can not put the profile of a rig 1080 in a 1060, the hashes for each something are different. If it would work, but as I say, but all the rigs are going to give the same supposed benefit.

It's a fudge that solution, this is not nemos miner to be cheating on the program.

Each rig has its own statistics that are provided by the hash rates of each profile, put all the rigs the same profile is a fudge.

if you've assigned the same profit profile for a "group" of miners - they all will mine the same coin, no?

Hello Patrike, I have a very important suggestion that I have already commented on it a long time ago (apart from some statistics)

The miners in general have a problem, many work with dozens of coins, I have defined about 80 coins. The problem is in the Wallets, obviously I will not install 80 wallets in PC. I use different exchanges that more or less let send from mining.

The problem is the restrictions, most pools pay at 1 hour, that's fine, but most have a minimum amount to send per currency, and if the shipment is less than that amount, it remains the pool. And that is happening to me very often.

I have thought about how to avoid it, and you should adapt your software to the common problems of the miners. I think the most efficient way to avoid that is to have a group of RIGS all mine to the same currency.

I give an example, I have 5 rigs in a group, if I could mark one of those 5 (probably the 3) as a teacher, it would be the only switch, the others of the group imitate the teacher, that is, they all mine the same coin.

With that we get that by allocating all the power to that pool, when the blocks mature, there will be more quantity to send to the exchange, and to overcome the minimum and the coins to enter. Right now I'm losing a lot of currencies like that, when each rig does what it wants, it does not get to mine enough.

In pools type suprnova there are no problems, because there you indicate every few coins the shipment is made, but in the Pools type Yiimp pay every 1 or 2 hours, but I already say the problem is sending it to the Exchage. If it does not exceed the minimum, I lose those coins, and it happens to me several times a day, and the easiest way is to make a group behave like a super rig, just make the Switch and everyone else imitates the teacher.

Also this should not be complicated to program. I hope you understand my problem, which is the same problem as many others who do not realize that problem, but they are losing money every day like me.

You could put a clickable Icon in the list of miners and you could only click one per group, when activated, this would be the teacher and the others imitate what the teacher does.

Please think that this is not a whim, it is a problem that many Exchanges are giving us, some are more hard like Cryptopia, and others have limits such as CriptoBridge or Crex24, but if I keep allowing each rig what I want, I lose many coins I need to concentrate all the power to the coin. The system of change or swtich does not change, but only one would do it and the others imitate it. Please understand the problem we have and that only you can correct.

In the override algorithm dialog, I do see that Awesome Miner displays the internal name of the algorithm in the user interface once you selected it (it can show up as 61 instead of Allium that is the name. This should however only be a display issue in this dialog, that I can correct by displaying the user friendly name of the algorithm instead of the internal name.

To make sure I have the full picture here
1) Is the JLG coin showing up correctly as C11 in the Coins tab (you may have to click Refresh once) after you change the algorithm of it?
2) In the Properties of your pool, is the JLG coin selected?
3) Can you use the Diagnostics button to start the miner to see which parameter that Awesome Miner passes to the mining software that isn't correct?
Thanks!

There is no concept of configuring this per miner. There is only a single textbox where you enter the path that will be used for all miners (both local and remote). When you use the Browse feature it can help you to fill in the path in this textbox, but if you specify a path for a remote miner, that one will be used for all miners.

If the path is the same on all miners, except the local computer, wouldn't it be possible to move the mining software to a similar path on the local computer as well?

I don't think there is a good solution to this today.

What I had in mind for the future was a concept where you can define your own variables on a miner, for example "Difficulty=123". From your pool properties you could then reference this from the Password field like "diff=[Difficulty]" resulting in "diff=123" for a specific miner. I hope a concept like this would resolve your scenario as well.

The profit factor is not applied for the coins/day calculations. It's only applied when displaying actual revenue and profit numbers.

What I would do is to see if it can be added the coins-per-day formula as well.

Please make sure nothing is blocking Awesome Miner from making a connection to the Cloud Services, where the exchange rates are downloaded. Can you open this URL on the computer running Awesome Miner to make sure you can connect:
https://5aozpdg9s2.execute-api.us-east-1.amazonaws.com/
Please note that the message you should receive when accessing from a web browser is "message: Forbidden", but that indicates that you are at least able to make the connection.

If you still experience the issue, please send me your Awesome Miner log file. Thanks!

If you run into this issue again - could you please send me your log file by e-mail and I can take a look at the scenario. Thanks!

Hi. Latest development version, direct download links:
http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

did you somehow used the same Profit Profile for both local and remote machine?

if so, try to use a separate profile (clone a duplicate if you want to retain benchmark figures).

https://www.dropbox.com/s/xe0sw46pz8lngd6/IMG_2263.TRIM.MOV?dl=0

Hello Patrike I leave you a new error, or so I think. It is using a Coincalculator coin, in the option to change the protocol.

I did not have problems with C11 but now yes, I also see that it is badly defined, like Allium.

2 days ago I was mining c11 without problems, now I get an error. I have everything right, the bencmark works without problems, I have chosen the best miner, and I have also tried with others. the configuration of the pool is correct, all right, even coins of days ago that mine now give me that failure. I have left a video for you to see.

When i set the full path from C:\ on each of the remote miners it gets overwritten by the latest path set. So if i set the full path on my local miner last it overwrites the previous paths set on the remote miners. Then the remote miner fails to find the file.

Then if i fix the full path again on the remote, it overwrites the path set on the local miner.

I have different C:\Users\"names"\  on the remotes so different paths on each one.   

Hi Patrike

Question regarding static difficulty for pools, I have around 20 odd pools that I mine on across several mining rigs, previously in order to set the static difficulty correctly I would just clone the pool and have separate ones for each rig, this resulting in a pools list that was fast approaching 100+, which is a nightmare for updating.

I have since condensed it all down to just a single pool per algo for all my rigs, but obviously static difficulty can only be set per pool which means for slower rigs it could result in a long share times and the faster ones risk being block/banned for spamming dozens of shares a second.

Is there a way to set static difficulty per algo, per rig (profit profiles maybe?)

I know that all CN V7 pools will have the same static difficulty, likewise for the LiteV7 and other algos.

Cheers

Ok this problem has continued, and I checked the path in the diagnostics. It appears that the problem is that on my previous Windows install, I used my email account for my user name, and when I  reinstalled, for security I used an anonymous account, and Awesome miner is using the old path to the mining software, which is totally understandable, but the problem is that when I correct it the path is remembered for awhile, then after some time eventually it reverts to the old file location, where it will not find the file. Thanks for your help in getting this straightened out.

Thx Patrike, this fixed the issue.

Like always great support, 

updated to 5.1.5, no conversion to euro, only show btc and usd
http://prntscr.com/jvkdm7

https://www.dropbox.com/s/ovsibs4jh1cyib5/Captura%20de%20pantalla%202018-06-16%20a%20las%206.12.02.png?dl=0

A question Patrike, you see that I have customized the progress, I look a lot Coins / day, but I get the impression that the% correction of the pool is not applied.

If I use all the miners in the same currency and see the estimate of the day, it gives me a value. If I add the estimate of all the currencies of each rig, it gives me a much lower amount. One example would be estimated 1,100,000 satochis estimated per day, but if I count the coins multiplying by their value, I barely reach 700,000 satochis.

Could it be that it is not applied there the percentage of correction of the pool in% ??

I am sorry. Now this fact does not occur. Now it´s fine 

I have a Baikal BK X. When I edit the mining pools in the IP dashboard they work just fine. When I add a mining pool into Awesome Miner and then change the mining pool for the Baikal BK X via awesomeminer the mining pool info seems to all be correct, but the BK X then processes the wrong algorithm.
For example for quark zpool mining pool when initiated through awesomeminer, the BK X processes X11 instead. I can't figure out how to change or fix it.

EDIT:
On the baikal IP dashboard, I deleted all pools, added the pools in the priority I wanted and then saved. Everything works on the Baikal. When I then go to awesomeminer, if I re-prioritize on AM the same errors happen (mining the wrong algo on the pool selected). Also, if I just disable all the pools so that only the pool I want to mine is enabled, that seems to work (very low rejected shares), but AM still says it is mining a different pool than it actually is. In summary, just seems like AM and Baikal do not work well together.