There are coins that appear, I add a pool and then they are no longer available, I go to the pool and by default it is in BTC and the currency does not appear. They are from Coincalculators and small volume coins. I do not know if there are any limitations, I check prices every 17 minutes.
I had to add them through the AWCU extension. Well, I guess the problem is with coincalculators. CTF, CERBERUS are two examples of currencies that today were and then have stopped being in AW, but if they are in Coincalculator
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 339. (Read 703146 times)
June 02, 2018, 11:45:55 AM
June 02, 2018, 06:56:59 AM
https://bitcointalksearch.org/topic/hsrminer-neoscrypt-fork-by-justaminer-high-hashrate-api-all-gpus-supported-2765610
you can think if you can add this new fork of hsrminer if it has api and gives good hash result.
We need a better neoscrypt miner at Nvidia.
About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.
I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.
you can think if you can add this new fork of hsrminer if it has api and gives good hash result.
We need a better neoscrypt miner at Nvidia.
About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.
I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.
After AM 5.x I have noticed when using managed miners I have to use a Managed Template to change miner/settings in some cases(changing to a different algo), just stopping and selecting a different miner in the Properties windows from the miner list does not actually change the selected miner/settings for it.
June 01, 2018, 08:06:35 PM
Awesome Miner Version 5.1.1
- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API
- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API
Hi Patrike,
Hash Refinery will be adopting this API change soon. Will AM pick up the units automatically or is an update required?
As a note for miners, once the API change is in place the units for ASIC dominated algos (qubit, quark, x11, x13 & scrypt) will change from Mh to Gh.
Cheers!
June 01, 2018, 03:27:29 PM
There are coins that are not good in Coinscalculator and therefore are causing a bad auto switch.
The problem is in the rewards. For example the MTI currency is listed as 20 reward, but really is 8. Which gives a much higher figure of profits
https://www.coincalculators.io/coin.aspx?crypto=mti+coin-mining-calculator reward 20 coins
stats pool mining
https://hash4.life/?address=M8DcZhiAevxWbcmSxbt1fmC31wvZvVJQNx rewards 8 coins
My doubt is that if I correct the reward in the currency, is the difficulty still being updated from coincalculator?
I think it is a big problem that a site that gives this data, has bad coins, because it influences us directly, that's why it should be possible to adjust the reward without stopping to update difficultad and other parameters.
The problem is in the rewards. For example the MTI currency is listed as 20 reward, but really is 8. Which gives a much higher figure of profits
https://www.coincalculators.io/coin.aspx?crypto=mti+coin-mining-calculator reward 20 coins
stats pool mining
https://hash4.life/?address=M8DcZhiAevxWbcmSxbt1fmC31wvZvVJQNx rewards 8 coins
My doubt is that if I correct the reward in the currency, is the difficulty still being updated from coincalculator?
I think it is a big problem that a site that gives this data, has bad coins, because it influences us directly, that's why it should be possible to adjust the reward without stopping to update difficultad and other parameters.
June 01, 2018, 02:12:13 PM
Anyone missing LOKI?
Been mining it for several days now all of a sudden coin stats are missing just shows Unspec CNheavy now I even added Json from whattomine.
Assuming its an api issue or something not in my control.
Thnaks
Been mining it for several days now all of a sudden coin stats are missing just shows Unspec CNheavy now I even added Json from whattomine.
Assuming its an api issue or something not in my control.
Thnaks
June 01, 2018, 11:41:09 AM
Hi Patrike, SRBMiner has just had another update adding support for the StelliteV4 which is due any time soon when it forks.
One thing I have noticed is that when you manually enter the config for SRBMiner the "algo" is always over written with the correct one, which under normal circumstances is fine, but several coins listed on coincalculators have the wrong algo listed.
Turtle Coin and Triton both use CN LiteV7 but they list them as CN Lite which obviously results in rejected shares. If you change the SRB config settings to the correct CN LiteV7 algo, it gets ignored and continues to try CN Lite.
One thing I have noticed is that when you manually enter the config for SRBMiner the "algo" is always over written with the correct one, which under normal circumstances is fine, but several coins listed on coincalculators have the wrong algo listed.
Turtle Coin and Triton both use CN LiteV7 but they list them as CN Lite which obviously results in rejected shares. If you change the SRB config settings to the correct CN LiteV7 algo, it gets ignored and continues to try CN Lite.
June 01, 2018, 10:25:02 AM
Well I would use it if it worked.
Either sgminer crashes or I have restricted permission. Plus sent an email for help this morning and still haven't heard back.
Either sgminer crashes or I have restricted permission. Plus sent an email for help this morning and still haven't heard back.
Just read the Helpsection.
This Program is AWESOME! I love it!
June 01, 2018, 08:27:22 AM
https://bitcointalksearch.org/topic/hsrminer-neoscrypt-fork-by-justaminer-high-hashrate-api-all-gpus-supported-2765610
you can think if you can add this new fork of hsrminer if it has api and gives good hash result.
We need a better neoscrypt miner at Nvidia.
About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.
I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.
you can think if you can add this new fork of hsrminer if it has api and gives good hash result.
We need a better neoscrypt miner at Nvidia.
About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.
I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.
The speeds written in the post is not the same as i experience on my rigs. Excevator is performing faster for me than the hsrminer.(And no dev fee)
I have no problems whit DSTM, did you try diagnostics ?
Set equihash to 1000000 in your profile so it forces it to start DSTM, and use the diagnostics button.
June 01, 2018, 04:44:16 AM
"actual pool payout performance" stats are stuck on the same values and don't change for many days already.
can you please investigate, patrike?
seems that it's fixed. thank you! can you please investigate, patrike?
June 01, 2018, 04:03:42 AM
patrike
A few more icons (link to a folder where I will periodically upload new)
https://yadi.sk/d/_2ZrfhxI3WoaXx
With the update 5.x.x again there were interruptions in monitoring
Ant works (it can be seen on the pool) ....
In this state they will hang for hours, before the ant's reset
http://images2.imagebam.com/b9/fb/f0/a7b01a882677234.PNG
It would be terrific to see whether API has access to it or not, and not to click on the "summary"
http://images2.imagebam.com/c9/9e/90/09a21a883054924.PNG
A few more icons (link to a folder where I will periodically upload new)
https://yadi.sk/d/_2ZrfhxI3WoaXx
With the update 5.x.x again there were interruptions in monitoring
Ant works (it can be seen on the pool) ....
In this state they will hang for hours, before the ant's reset
http://images2.imagebam.com/b9/fb/f0/a7b01a882677234.PNG
It would be terrific to see whether API has access to it or not, and not to click on the "summary"
http://images2.imagebam.com/c9/9e/90/09a21a883054924.PNG
June 01, 2018, 01:56:01 AM
Great article !! But does it work? You have done a great job in telephoning - Awesome Miner. Thank you for that!!
June 01, 2018, 12:02:33 AM
"actual pool payout performance" stats are stuck on the same values and don't change for many days already.
can you please investigate, patrike?
can you please investigate, patrike?
May 31, 2018, 09:59:20 PM
I have problems with the earnings forecast in Skein.
Each pool and currency I do a minimum test of 2 hours to calculate the deviation of the forecast of currencies day, fee mining and fee pool. Besides, we already know that not all pools are the same.
It is normal to always have a deviation of between 3 and 10% and to correct it in the pool configuration change to 0.97 to 0.90 respectively. In this way the Switch is more accurate in its changes
But I have already found two currencies that the difference is very exaggerated, we speak of between 50% to 78%, coins like PRTX or TIMEC. I noticed that both are Skein, and then the question arises. If the only two coins that I have added for now in Skein give me such a high deviation, will there not be a bad calculation by AW?
PRTX I had to go down almost 78%, that I added it. But MOC COIN of coinscalculator happens to me the same thing, 51% less according to the forecast of coins and profits. I have looked well that the price was correct the one indicated in AW and the one I have in the exchange, and the result has been just half
So it can not be a coincidence and it only happens in Skin. Patrick could you check this? I get 12Ghs in Skein in case it helps.
The currency forecast informs me AW because it can be customized, it works pretty well, close to reality in all currencies except Skein.
Each pool and currency I do a minimum test of 2 hours to calculate the deviation of the forecast of currencies day, fee mining and fee pool. Besides, we already know that not all pools are the same.
It is normal to always have a deviation of between 3 and 10% and to correct it in the pool configuration change to 0.97 to 0.90 respectively. In this way the Switch is more accurate in its changes
But I have already found two currencies that the difference is very exaggerated, we speak of between 50% to 78%, coins like PRTX or TIMEC. I noticed that both are Skein, and then the question arises. If the only two coins that I have added for now in Skein give me such a high deviation, will there not be a bad calculation by AW?
PRTX I had to go down almost 78%, that I added it. But MOC COIN of coinscalculator happens to me the same thing, 51% less according to the forecast of coins and profits. I have looked well that the price was correct the one indicated in AW and the one I have in the exchange, and the result has been just half
So it can not be a coincidence and it only happens in Skin. Patrick could you check this? I get 12Ghs in Skein in case it helps.
The currency forecast informs me AW because it can be customized, it works pretty well, close to reality in all currencies except Skein.
May 31, 2018, 10:41:19 AM
Purchased and use awesomeminer on 5 rigs. Great software! I hope to have more time to dive in and use all of its available features.
May 31, 2018, 10:18:58 AM
https://bitcointalksearch.org/topic/hsrminer-neoscrypt-fork-by-justaminer-high-hashrate-api-all-gpus-supported-2765610
you can think if you can add this new fork of hsrminer if it has api and gives good hash result.
We need a better neoscrypt miner at Nvidia.
About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.
I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.
you can think if you can add this new fork of hsrminer if it has api and gives good hash result.
We need a better neoscrypt miner at Nvidia.
About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.
I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.
May 31, 2018, 03:42:53 AM
Awesome Miner Version 5.1.1
- Default pools can be configured on Antminer R1-LTC
- Added setting for matching on exact IP address when searching for miners
- Tag implementation for miners improved for more efficient display in the compact list mode and to hide empty groups when filtering
- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API
- Added Nicehash pools for Cryptonight-Heavy and Lyra2z
- SRBMiner 1.5.6
- Correction to the scenario where the view mode of the miner list is changed
Since yesterday, the CoinCalculators.io integration will automatically include all coins when Awesome Miner requests the coin information, including the low volume coins that previously were excluded.
- Default pools can be configured on Antminer R1-LTC
- Added setting for matching on exact IP address when searching for miners
- Tag implementation for miners improved for more efficient display in the compact list mode and to hide empty groups when filtering
- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API
- Added Nicehash pools for Cryptonight-Heavy and Lyra2z
- SRBMiner 1.5.6
- Correction to the scenario where the view mode of the miner list is changed
Since yesterday, the CoinCalculators.io integration will automatically include all coins when Awesome Miner requests the coin information, including the low volume coins that previously were excluded.
May 31, 2018, 02:24:15 AM
How can I add 0xBitcoin mining programs to Awesome miner 
https://0xbitcoin.org/
https://github.com/0xbitcoin/0xbitcoin-miner/blob/master/RELEASES.md
Hi,https://0xbitcoin.org/
https://github.com/0xbitcoin/0xbitcoin-miner/blob/master/RELEASES.md
For mining software that either doesn't provide any API (monitoring interface that Awesome Miner can connect to) at all, or with an interface that isn't supported from Awesome Miner, the only option is to use the Generic Miner concept.
With a generic miner you can launch the mining software from Awesome Miner, but you will not get any information about hashrates and income. For more information, please see:
http://www.awesomeminer.com/help/genericminer.aspx
May 30, 2018, 08:07:43 PM
How can I add 0xBitcoin mining programs to Awesome miner
https://0xbitcoin.org/
https://github.com/0xbitcoin/0xbitcoin-miner/blob/master/RELEASES.md
https://0xbitcoin.org/
https://github.com/0xbitcoin/0xbitcoin-miner/blob/master/RELEASES.md
May 30, 2018, 02:58:25 PM
Hello Patrike. Thanks for all your recent work. Awesome Miner just keeps getting more awesome! I am having a frustrating problem however, and hoping I can get it figured out. So, I just started building a new rig. It is a Ryzen 2700X CPU with AMD RX 480 GPU (only have the first GPU, the second one is on it's way and I will be adding one a week till full) I made two miners, (RX 480 rig GPU, and RX 480 rig CPU) and two profiles AMD GPU, and CPU2. I started mining, and after awhile I noticed that both miners were mining Cryptonight V7, but one was mining on Nicehash, and the other on Miningpoolhub. I thought it was strange, but I just let it go for awhile. But after a few hours, I started looking at the online services, and it would show one of the two (nicehash, or miningpoolhub) as clearly higher in revenue, yet even when restarted manually, I couldn't get them to mine on the same pool as each other. At the moment Nicehash was reporting a higher rate, so I tried disabling Miningpoolhub from the CPU profile to force them to both mine Cryptonight V7 on Nicehash, but when restarted, then it went to the next algo in the list (I think it was yescrypt zpool) which had much lower earnings (-25%). So, the next thing I tried, was switching which one had Miningpoolhub disabled, and CPU started mining on Cryptonight V7 Nicehash, and now the GPU profile mined on Nicehash too, but on Equihash. (I couldn't get them to both mine CV7 on the same pool no matter what I tried) I gave up for the night, but then in the morning I noticed it was still mining Nicehash equihash on GPU, and Nicehash CV7 on CPU. I checked the online services for the GPU, and it listed Equihash $1.05, and Ethereum $1.39. So I hit restart, and it just went back to Equihash. Hmmm. So, I tried disabling Equihash for the profile, and upon restart it started mining Cryptonight old. (Still wouldn't mine CV7 on same pool either) I then tried disabling every algorithm except Ethereum, and when I tried to start, I got an error that there were no valid pools selected for the profit switcher. I activated Miningpoolhub, and tried again, but same thing, no pools available. Not sure what the deal is. I just benchmarked it last night. I did it first on quick, then followed up with a second round of medium for Phoenix, and Claymore, with Phoenix coming out ahead with 30.5Mhs. The behavior I'm expecting is whatever is the highest in earnings on the online services page should be the pool that the profit switcher switches to if you hit restart. Not sure why it's so resistant to going to the pool I want. I like how on the Baikal miners there is an option for prioritize in the pool area, but I'd be happy if I could just get the top item in the online services to mine. Thank you for any suggestions you might have to get it working right.
I think this is related to the feature where Awesome Miner can detect pools where no accepted shares are produced within a certain amount of time. I would suggest to disable this and give it a try one more time.Go to the Options dialog, Profit switching section, and uncheck "Ignore pools with no accepted shares".
If a pool isn't producing the accepted shares, it will be marked as failed and the miner will move on to the second most profitable pool. This can result in that one of your miner isn't on the same pool as the others as the failure is per miner.
I would also recommend that you right click on a miner and select View Details when you have question about the profit switching decisions. If a pool is marked as a failure it's also indicated here.
May 30, 2018, 02:54:11 PM
patrike
a few dozen icons in the archive below;)
https://yadi.sk/d/aQOxMRrE3WhW5o
https://yadi.sk/d/C54_mzcr3WhwFN
Thanks! a few dozen icons in the archive below;)
https://yadi.sk/d/aQOxMRrE3WhW5o
https://yadi.sk/d/C54_mzcr3WhwFN
Jump to: