Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 340. (Read 703583 times)

"actual pool payout performance" stats are stuck on the same values and don't change for many days already.
can you please investigate, patrike?

I have problems with the earnings forecast in Skein.
Each pool and currency I do a minimum test of 2 hours to calculate the deviation of the forecast of currencies day, fee mining and fee pool. Besides, we already know that not all pools are the same.

It is normal to always have a deviation of between 3 and 10% and to correct it in the pool configuration change to 0.97 to 0.90 respectively. In this way the Switch is more accurate in its changes

But I have already found two currencies that the difference is very exaggerated, we speak of between 50% to 78%, coins like PRTX or TIMEC. I noticed that both are Skein, and then the question arises. If the only two coins that I have added for now in Skein give me such a high deviation, will there not be a bad calculation by AW?

PRTX I had to go down almost 78%, that I added it. But MOC COIN of coinscalculator happens to me the same thing, 51% less according to the forecast of coins and profits. I have looked well that the price was correct the one indicated in AW and the one I have in the exchange, and the result has been just half

So it can not be a coincidence and it only happens in Skin. Patrick could you check this? I get 12Ghs in Skein in case it helps.

The currency forecast informs me AW because it can be customized, it works pretty well, close to reality in all currencies except Skein.

Purchased and use awesomeminer on 5 rigs.  Great software!  I hope to have more time to dive in and use all of its available features.

https://bitcointalksearch.org/topic/hsrminer-neoscrypt-fork-by-justaminer-high-hashrate-api-all-gpus-supported-2765610

you can think if you can add this new fork of hsrminer if it has api and gives good hash result.

We need a better neoscrypt miner at Nvidia.

About DSTM I still have problems, if someone else has problems that say so. Neither the DSTM that comes pre installed, nor the one that I have uploaded separately work. Nothing comes out in the console, the miner is simply canceled and period, nothing is seen in the console.

I have it deactivated and I already tell you, neither the one that brings nor the one that I have added has managed to work.

Awesome Miner Version 5.1.1

- Default pools can be configured on Antminer R1-LTC
- Added setting for matching on exact IP address when searching for miners
- Tag implementation for miners improved for more efficient display in the compact list mode and to hide empty groups when filtering
- Adjusted to the new Zergpool profit reporting data where the hash rate unit is part of the API
- Added Nicehash pools for Cryptonight-Heavy and Lyra2z
- SRBMiner 1.5.6
- Correction to the scenario where the view mode of the miner list is changed

Since yesterday, the CoinCalculators.io integration will automatically include all coins when Awesome Miner requests the coin information, including the low volume coins that previously were excluded.

Hi,
For mining software that either doesn't provide any API (monitoring interface that Awesome Miner can connect to) at all, or with an interface that isn't supported from Awesome Miner, the only option is to use the Generic Miner concept.

With a generic miner you can launch the mining software from Awesome Miner, but you will not get any information about hashrates and income. For more information, please see:
http://www.awesomeminer.com/help/genericminer.aspx

How can I add 0xBitcoin mining programs to Awesome miner

https://0xbitcoin.org/

https://github.com/0xbitcoin/0xbitcoin-miner/blob/master/RELEASES.md

I think this is related to the feature where Awesome Miner can detect pools where no accepted shares are produced within a certain amount of time. I would suggest to disable this and give it a try one more time.

Go to the Options dialog, Profit switching section, and uncheck "Ignore pools with no accepted shares".

If a pool isn't producing the accepted shares, it will be marked as failed and the miner will move on to the second most profitable pool. This can result in that one of your miner isn't on the same pool as the others as the failure is per miner.

I would also recommend that you right click on a miner and select View Details when you have question about the profit switching decisions. If a pool is marked as a failure it's also indicated here.

Thanks!

For almost all other ASIC miners, it's possible to access them via SSH and reconfigure them for Privileged API mode. As you noticed, Awesome Miner can do that for you if you have Antminers. For Dragonmint, the SSH password isn't known and I have several customers that are trying to get it from the vendor. Without SSH access, the miners will always be in Restricted API mode.

DragonMint miners do have their own proprietary API unique for the miners. Using this API it should be possible for Awesome Miner to configure the default pools of the miner, even if it's running in Restricted API mode. I'm currently investigating this and made some good progress.

The safest solution to a MSI based uninstallation that isn't working is to use this tool from Microsoft:
https://support.microsoft.com/en-us/help/17588/fix-problems-that-block-programs-from-being-installed-or-removed

I will do the registry cleanup for you - and the fact that Microsoft made it available for exactly this purpose should make it a safe solution.

As i said i faced that problem a while ago (few months). That was with an older version, i would say the early 4.x or late 3.x versions. I unfortunately did not try it on version 5.1, sorry.

Hi, did use regedit and deleted all awesome*.
Did manage to install v 5.1 after that. Thank You...

I faced that problem a while ago and i am highly interested in finding a fast and easy solution.

Meanwhile, i can share how i painfully walked around the problem.

I used regedit, searched for “awesome” and deleted every entries related to awesome miner i found. There were many of them, took me about an hour to find and delete them all.

After that i was able to install the latest version with no problems.

Disclaimer : I am not a pro with the registry, and you should know there are risks to corrupt your system by playing with it. Use my solution at your own risk.

Is there a way to enable API Access on the dragonmints T1's? Ive tried via the antminer API access tab and its all failures after changing the name and password to the correct combo.

Hello and thanks for a superb program.

But now my problem: I had v5.03 installed on my rig.
Tried to update to v 5.1.
Nothing happens. When program restarts Im back to v 5.03.
Tries to uninstall v 5.03. some files remained and uninstall asks for .msi for v 5.02.?

Deleted all folders for awesomeminer in programx86 and in appdata\%.

Tried to make clean install v 5.1 but it says uninstall of old version cant be done.... Cancels install...

and now I am lost in space, woho....
What to do and thank You in advance...

Hello Patrike. Thanks for all your recent work. Awesome Miner just keeps getting more awesome! I am having a frustrating problem however, and hoping I can get it figured out. So, I just started building a new rig. It is a Ryzen 2700X CPU with AMD RX 480 GPU (only have the first GPU, the second one is on it's way and I will be adding one a week till full) I made two miners, (RX 480 rig GPU, and RX 480 rig CPU) and two profiles AMD GPU, and CPU2. I started mining, and after awhile I noticed that both miners were mining Cryptonight V7, but one was mining on Nicehash, and the other on Miningpoolhub. I thought it was strange, but I just let it go for awhile. But after a few hours, I started looking at the online services, and it would show one of the two (nicehash, or miningpoolhub) as clearly higher in revenue, yet even when restarted manually, I couldn't get them to mine on the same pool as each other. At the moment Nicehash was reporting a higher rate, so I tried disabling Miningpoolhub from the CPU profile to force them to both mine Cryptonight V7 on Nicehash, but when restarted, then it went to the next algo in the list (I think it was yescrypt zpool) which had much lower earnings (-25%). So, the next thing I tried, was switching which one had Miningpoolhub disabled, and CPU started mining on Cryptonight V7 Nicehash, and now the GPU profile mined on Nicehash too, but on Equihash. (I couldn't get them to both mine CV7 on the same pool no matter what I tried) I gave up for the night, but then in the morning I noticed it was still mining Nicehash equihash on GPU, and Nicehash CV7 on CPU. I checked the online services for the GPU, and it listed Equihash $1.05, and Ethereum $1.39. So I hit restart, and it just went back to Equihash. Hmmm. So, I tried disabling Equihash for the profile, and upon restart it started mining Cryptonight old. (Still wouldn't mine CV7 on same pool either) I then tried disabling every algorithm except Ethereum, and when I tried to start, I got an error that there were no valid pools selected for the profit switcher. I activated Miningpoolhub, and tried again, but same thing, no pools available. Not sure what the deal is. I just benchmarked it last night. I did it first on quick, then followed up with a second round of medium for Phoenix, and Claymore, with Phoenix coming out ahead with 30.5Mhs. The behavior I'm expecting is whatever is the highest in earnings on the online services page should be the pool that the profit switcher switches to if you hit restart. Not sure why it's so resistant to going to the pool I want. I like how on the Baikal miners there is an option for prioritize in the pool area, but I'd be happy if I could just get the top item in the online services to mine. Thank you for any suggestions you might have to get it working right.

Hi everyone,

this is not related to AM directly but... i got data from AM.

Can anyone confirm that X16r algo earnings from zpool, ahash etc? it pays like 30-40% more.
but i doubt it because i have mined in zpool, ahash, zerg etc earlier this year but i got 50% less than in NH, in the end.

are those "pool-pool" still kinna ripoff?

thanks.

patrike

a few dozen icons in the archive below;)
https://yadi.sk/d/aQOxMRrE3WhW5o

https://yadi.sk/d/C54_mzcr3WhwFN

Today Awesome Miner is only displaying the exchange rate as reported from WhatToMine and CoinCalculators. They lookup exchange rates on multiple exchanges and I think it's the highest one they are doing their calculations based on.

If it's this large differences in exchange rate, I would recommend you to also look at the web sites of WhatToMine / CoinCalculators, because they provide more detailed information about the exchanges and the rate for each of them. Maybe I should ask for getting the name of the best exchange via their API's, so it could be listed in Awesome Miner. CoinWarz had this information in their API's.