[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 358.

hashrefinery

member

Activity: 120

Merit: 11

Quote from: moppidoo on April 30, 2018, 12:05:23 AM

Quote from: textb0ok on April 29, 2018, 07:56:52 PM

What about Hash Refinery? I don't think they have a discord. By the way, thank you to STSMiner for pointing out zpool has a discord and providing the link.

the man's alive here on BCT, and lastly about their LTC payout in this thread not long ago is:
https://bitcointalksearch.org/topic/m.34989726

shoot him a PM or post your address here and hope it gets seen

PM is the best contact method, but posts in this thread also get read a few times a week.

The yiimp backend should read your preferred coin from the c=xxx flag and validate against that wallet first. If that fails, or if the c=xxx wasn't read correctly it will keep trying other wallets until one says the address is valid. Many addresses are valid on multiple coins so incorrect detection is not that uncommon.

If you can send through one of the addresses you tried via PM we'll manually change it.

zaqwsx

jr. member

Activity: 58

Merit: 5

Quote from: moppidoo on April 30, 2018, 02:44:47 AM

Quote from: zaqwsx on April 30, 2018, 01:51:53 AM

Thanks for the answer. That will work.

Another question: Is it possible to switch between Managed profit miner and Managed miner using the same method or it must be done another way? For example: If I want to run Managed profit miner @ Miningpoolhub at night time and to mine Ethereum @ Nanopool at day time?

That I'm not sure, have actually been using profit switcher all the time, but theoretically can do a workaround like below:

Create 2 profit profiles for the same rig, easily be done using clone function (do it AFTER you benchmarked the first one to save benchmarking / manual editing data again)

create a pool for nanopool eth

Assign one profit miner to have it's "override pools" section to only have MPH selected.

Assign the other profit miner to have same setting except only check the bottom "custom pools" and select the nanopool eth.

Now in the rules, you can set the similar time trigger and use the action "Apply profit profile" to achieve the same result

Cheers,

Excellent. Thanks again!

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: zaqwsx on April 30, 2018, 01:51:53 AM

Thanks for the answer. That will work.

Another question: Is it possible to switch between Managed profit miner and Managed miner using the same method or it must be done another way? For example: If I want to run Managed profit miner @ Miningpoolhub at night time and to mine Ethereum @ Nanopool at day time?

That I'm not sure, have actually been using profit switcher all the time, but theoretically can do a workaround like below:

Create 2 profit profiles for the same rig, easily be done using clone function (do it AFTER you benchmarked the first one to save benchmarking / manual editing data again)

create a pool for nanopool eth

Assign one profit miner to have it's "override pools" section to only have MPH selected.

Assign the other profit miner to have same setting except only check the bottom "custom pools" and select the nanopool eth.

Now in the rules, you can set the similar time trigger and use the action "Apply profit profile" to achieve the same result

Cheers,

zaqwsx

jr. member

Activity: 58

Merit: 5

Quote from: moppidoo on April 30, 2018, 12:20:58 AM

Quote from: zaqwsx on April 29, 2018, 11:28:58 PM

What is the best way to set a time schedule switching between two "Managed miner" at a specific time?

For example: I want my rigs to mine Verge coin @ yiimp.eu from 20:00h to 8:00h and then to switch to mining Raven coin @ Suprnova. I also want to set a different overclock at both cases.

Thanks for help.

Add Rule:

Trigger -> Time, select time

Actions -> Apply template (make sure you have created appropriate templates for the time rotation pools you'd like to use) to the relevant miners.

**
Also, if your version works with afterburner remote, you'll be able to apply clocking profile to the templates individually
If not on Premium edition or you simply despise AB, you can use nvidia inspector and apply appropriate clocking commands in the command Line section in the individual templates (never done this myself, but search around you should get plenty of answers on how to do so)

Something like: https://bitcointalksearch.org/topic/msi-afterburner-preset-switch-automation-2105295

Thanks for the answer. That will work.

Another question: Is it possible to switch between Managed profit miner and Managed miner using the same method or it must be done another way? For example: If I want to run Managed profit miner @ Miningpoolhub at night time and to mine Ethereum @ Nanopool at day time?

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: zaqwsx on April 29, 2018, 11:28:58 PM

What is the best way to set a time schedule switching between two "Managed miner" at a specific time?

For example: I want my rigs to mine Verge coin @ yiimp.eu from 20:00h to 8:00h and then to switch to mining Raven coin @ Suprnova. I also want to set a different overclock at both cases.

Thanks for help.

Add Rule:

Trigger -> Time, select time

Actions -> Apply template (make sure you have created appropriate templates for the time rotation pools you'd like to use) to the relevant miners.

**
Also, if your version works with afterburner remote, you'll be able to apply clocking profile to the templates individually
If not on Premium edition or you simply despise AB, you can use nvidia inspector and apply appropriate clocking commands in the command Line section in the individual templates (never done this myself, but search around you should get plenty of answers on how to do so)

Something like: https://bitcointalksearch.org/topic/msi-afterburner-preset-switch-automation-2105295

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: Dihlofos on April 29, 2018, 11:06:26 PM

Patrick

Why wonderful miner switches to the pool and the algorithm, which shows a high profit per day for this algorithm? Despite the fact that the pool only on this algorithm works 1-10 miners.
Naturally, they get a big reward, but time to unravel the block takes a lot.
Therefore, this automatic pool and algorithm selection is incorrect. Since the pool comes with information about the large payout, but in fact it is not.

And deal with the order of display graphics cards to be as miners.
Do other means of overclocking video cards. Afterburner not see more than eight cards.

unselect pools that doesn't work for you and done with it, the blockchain is a very dynamic business and if you are pondering about not always being in the lucky pools to find blocks and get rewarded, well, tough. You'd be better off mining a coin or 2 with a managed miner/external/generic miner and stay away from profit switch miners. If you feel comfy staying with big pools, go stick with them (though not good for decentralization), ask yourself what's the chance of a small pool hitting blocks consecutively as fast as pools with much higher hashrate, by the time you get their inflated profit figure and switch, you're already behind the game.

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: textb0ok on April 29, 2018, 07:56:52 PM

What about Hash Refinery? I don't think they have a discord. By the way, thank you to STSMiner for pointing out zpool has a discord and providing the link.

the man's alive here on BCT, and lastly about their LTC payout in this thread not long ago is:
https://bitcointalksearch.org/topic/m.34989726

shoot him a PM or post your address here and hope it gets seen

zaqwsx

jr. member

Activity: 58

Merit: 5

What is the best way to set a time schedule switching between two "Managed miner" at a specific time?

For example: I want my rigs to mine Verge coin @ yiimp.eu from 20:00h to 8:00h and then to switch to mining Raven coin @ Suprnova. I also want to set a different overclock at both cases.

Thanks for help.

Dihlofos

newbie

Activity: 17

Merit: 0

Patrick

Why wonderful miner switches to the pool and the algorithm, which shows a high profit per day for this algorithm? Despite the fact that the pool only on this algorithm works 1-10 miners.
Naturally, they get a big reward, but time to unravel the block takes a lot.
Therefore, this automatic pool and algorithm selection is incorrect. Since the pool comes with information about the large payout, but in fact it is not.

And deal with the order of display graphics cards to be as miners.
Do other means of overclocking video cards. Afterburner not see more than eight cards.

textb0ok

newbie

Activity: 37

Merit: 0

Quote from: moppidoo on April 29, 2018, 04:53:51 PM

Quote from: textb0ok on April 29, 2018, 03:10:55 PM

Quote from: STSMiner on April 29, 2018, 02:26:15 PM

Quote from: textb0ok on April 29, 2018, 11:34:39 AM

Is anyone else having issues with trying to get LTC payouts from zpool and hashrefinery?

In AwesomeMiner I have done a bulk edit in Online Services for all of zpool and I added c=LTC to the password box.... but when I start mining, zpool is showing my LTC wallet as BTC. I have tried 5 LTC wallets from coinbase 1 LTC wallet from Jaxx, and 1 LTC wallet from Exodus.... They always show as BTC in AwesomeMiner and on the zpool site.

For hash refinery I have the same problem... In AwesomeMiner I have done a bulk edit in Online Services for all of hashrefinery and I added c=LTC to the password box.... but when I start mining, hashrefinery is showing my LTC wallet as XMY. Again, I tried 7 different LTC wallets, but there is no change.

When I view the miner process it does show the correct command line -p c=LTC -b 0.0.0.0:4028 ,but the payout currency is always wrong for zpool and hash refinery.

I have no problems with zergpool at all. My payout currency for zergpool works 100%. I use the same wallet for MiningPoolHub with no issues at all.

Visit the Discord for zpool and ask for your wallet address to be fixed in the support channel.

https://discord.gg/n45n6Jj

I tried 7 different LTC wallets... what is the "fix" that they provide?

Also, what about hash refinery? HashRefinery has my wallet showing as XMY.

It's just matching issue with pattern, they fix the ambiguous address that were incorrectly recognised to match the correct crypto in the Yiimp backend (database)

What about Hash Refinery? I don't think they have a discord. By the way, thank you to STSMiner for pointing out zpool has a discord and providing the link.

moppidoo

jr. member

Activity: 348

Merit: 5

Quote from: textb0ok on April 29, 2018, 03:10:55 PM

Quote from: STSMiner on April 29, 2018, 02:26:15 PM

Quote from: textb0ok on April 29, 2018, 11:34:39 AM

Is anyone else having issues with trying to get LTC payouts from zpool and hashrefinery?

In AwesomeMiner I have done a bulk edit in Online Services for all of zpool and I added c=LTC to the password box.... but when I start mining, zpool is showing my LTC wallet as BTC. I have tried 5 LTC wallets from coinbase 1 LTC wallet from Jaxx, and 1 LTC wallet from Exodus.... They always show as BTC in AwesomeMiner and on the zpool site.

For hash refinery I have the same problem... In AwesomeMiner I have done a bulk edit in Online Services for all of hashrefinery and I added c=LTC to the password box.... but when I start mining, hashrefinery is showing my LTC wallet as XMY. Again, I tried 7 different LTC wallets, but there is no change.

When I view the miner process it does show the correct command line -p c=LTC -b 0.0.0.0:4028 ,but the payout currency is always wrong for zpool and hash refinery.

I have no problems with zergpool at all. My payout currency for zergpool works 100%. I use the same wallet for MiningPoolHub with no issues at all.

Visit the Discord for zpool and ask for your wallet address to be fixed in the support channel.

https://discord.gg/n45n6Jj

I tried 7 different LTC wallets... what is the "fix" that they provide?

Also, what about hash refinery? HashRefinery has my wallet showing as XMY.

It's just matching issue with pattern, they fix the ambiguous address that were incorrectly recognised to match the correct crypto in the Yiimp backend (database)

textb0ok

newbie

Activity: 37

Merit: 0

Quote from: STSMiner on April 29, 2018, 02:26:15 PM

Quote from: textb0ok on April 29, 2018, 11:34:39 AM

Is anyone else having issues with trying to get LTC payouts from zpool and hashrefinery?

In AwesomeMiner I have done a bulk edit in Online Services for all of zpool and I added c=LTC to the password box.... but when I start mining, zpool is showing my LTC wallet as BTC. I have tried 5 LTC wallets from coinbase 1 LTC wallet from Jaxx, and 1 LTC wallet from Exodus.... They always show as BTC in AwesomeMiner and on the zpool site.

For hash refinery I have the same problem... In AwesomeMiner I have done a bulk edit in Online Services for all of hashrefinery and I added c=LTC to the password box.... but when I start mining, hashrefinery is showing my LTC wallet as XMY. Again, I tried 7 different LTC wallets, but there is no change.

When I view the miner process it does show the correct command line -p c=LTC -b 0.0.0.0:4028 ,but the payout currency is always wrong for zpool and hash refinery.

I have no problems with zergpool at all. My payout currency for zergpool works 100%. I use the same wallet for MiningPoolHub with no issues at all.

Visit the Discord for zpool and ask for your wallet address to be fixed in the support channel.

https://discord.gg/n45n6Jj

I tried 7 different LTC wallets... what is the "fix" that they provide?

Also, what about hash refinery? HashRefinery has my wallet showing as XMY.

STSMiner

full member

Activity: 270

Merit: 115

Quote from: textb0ok on April 29, 2018, 11:34:39 AM

Is anyone else having issues with trying to get LTC payouts from zpool and hashrefinery?

In AwesomeMiner I have done a bulk edit in Online Services for all of zpool and I added c=LTC to the password box.... but when I start mining, zpool is showing my LTC wallet as BTC. I have tried 5 LTC wallets from coinbase 1 LTC wallet from Jaxx, and 1 LTC wallet from Exodus.... They always show as BTC in AwesomeMiner and on the zpool site.

For hash refinery I have the same problem... In AwesomeMiner I have done a bulk edit in Online Services for all of hashrefinery and I added c=LTC to the password box.... but when I start mining, hashrefinery is showing my LTC wallet as XMY. Again, I tried 7 different LTC wallets, but there is no change.

When I view the miner process it does show the correct command line -p c=LTC -b 0.0.0.0:4028 ,but the payout currency is always wrong for zpool and hash refinery.

I have no problems with zergpool at all. My payout currency for zergpool works 100%. I use the same wallet for MiningPoolHub with no issues at all.

Visit the Discord for zpool and ask for your wallet address to be fixed in the support channel.

https://discord.gg/n45n6Jj

textb0ok

newbie

Activity: 37

Merit: 0

Is anyone else having issues with trying to get LTC payouts from zpool and hashrefinery?

In AwesomeMiner I have done a bulk edit in Online Services for all of zpool and I added c=LTC to the password box.... but when I start mining, zpool is showing my LTC wallet as BTC. I have tried 5 LTC wallets from coinbase 1 LTC wallet from Jaxx, and 1 LTC wallet from Exodus.... They always show as BTC in AwesomeMiner and on the zpool site.

For hash refinery I have the same problem... In AwesomeMiner I have done a bulk edit in Online Services for all of hashrefinery and I added c=LTC to the password box.... but when I start mining, hashrefinery is showing my LTC wallet as XMY. Again, I tried 7 different LTC wallets, but there is no change.

When I view the miner process it does show the correct command line -p c=LTC -b 0.0.0.0:4028 ,but the payout currency is always wrong for zpool and hash refinery.

I have no problems with zergpool at all. My payout currency for zergpool works 100%. I use the same wallet for MiningPoolHub with no issues at all.

akadamson

member

Activity: 140

Merit: 18

Patrike, ya might want to pick up Bminer 7.0.0 in your next update.

akadamson

member

Activity: 140

Merit: 18

Quote from: patrike on April 28, 2018, 03:17:37 PM

Quote from: akadamson on April 27, 2018, 06:52:01 PM

Patrike,

I replied to your messages about AB remote.

It's not pulling up the card name which makes trying to do application of OC profiles by card, by algo impossible, unless you specifically know the GPU number. Not sure what you can do about it, but there is also a new 4.5.0 AB that was just released?

I tested on my system. With Afterburner 4.3 and got the GPU names over the MSI Afterburner interface. After upgrading to Afterburner 4.5, I get the same problem as you noticed, the output from the MSI Afterburner interface doesn't include the GPU names anymore.

Update:
I found a solution that works on my system. I didn't have the latest DLL file for the MSI Afterburner Remote Server software that I link to from the Awesome Miner help pages. Please see the bottom of this page:
http://www.awesomeminer.com/help/gpuclocking.aspx

After replacing the DLL file for MSI Afterburner Remote Server, I do get the GPU names.

Yeah - fixed with that dll update!!!

Thanks!

Lunga Chung

member

Activity: 277

Merit: 23

Will AM officially support OverdriveNtool for OC ?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: GoRdiE on April 28, 2018, 05:23:24 AM

@patrike

How to add in pool balance, the yiimp's compatible pools added manually in Online service? Roll Eyes

That's unfortunately not possible today, but I agree that this should be supported.

A workaround could be to add it as a Wallet balance in Options dialog, Balance section. If you specify an API URL like this, you can probably add your addresses below:
http://api.blazepool.com/wallet/[address]
Then you can add one or a few addresses in the list below

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Seanklei10 on April 27, 2018, 09:24:51 PM

The balance sorting did change, but now it just seems completely random the order it puts the totals in.

Example:

I have $437.28 -> $7.09 -> $69.03 -> $6.77 ->$761.71 -> $67.51 when i choose to sort that column.

I had implemented better sorting for many columns on the Balance tab. However, I did notice that when sorting on the 4th column for Coin balance, it still makes the sorting based on the data from 3rd column. I will correct that in the next update.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: akadamson on April 27, 2018, 06:52:01 PM

Patrike,

I replied to your messages about AB remote.

It's not pulling up the card name which makes trying to do application of OC profiles by card, by algo impossible, unless you specifically know the GPU number. Not sure what you can do about it, but there is also a new 4.5.0 AB that was just released?

I tested on my system. With Afterburner 4.3 and got the GPU names over the MSI Afterburner interface. After upgrading to Afterburner 4.5, I get the same problem as you noticed, the output from the MSI Afterburner interface doesn't include the GPU names anymore.

Update:
I found a solution that works on my system. I didn't have the latest DLL file for the MSI Afterburner Remote Server software that I link to from the Awesome Miner help pages. Please see the bottom of this page:
http://www.awesomeminer.com/help/gpuclocking.aspx

After replacing the DLL file for MSI Afterburner Remote Server, I do get the GPU names.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 358. (Read 703512 times)