Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 373. (Read 703512 times)

Why is Monero profitabilitly displayed as 0.000 ? I have external miner and the hash rate is properly calculated for Monero but it looks like AW can't get the value of monero (added json manualy still displays value 0)

Check, been using MPH for Ethereum and Equihash in the past.

Check

Check, it's showing Ethereum and Equihash for MPH.
Unfortunately it's not showing CryptonightV7 for MPH but I do see it for Nicehash.

This is confusing  . Thanks for helping me troubleshoot this.

Hi Patrike,

For those of us that have filled out electrical costs and watts per algo/rig would it be possible to add an estimated overall daily/monthly electrical amount for all my rigs on the dashboard (or wherever makes sense)?  The information is already there in Awesome Miner within the Online Services where I manually look at the difference between revenue and profit which I add manually across the rigs, but an automated way or checking this in realtime would be ideal.

I added BlazePool algos to Options - Online Services - User defined online services and its working well for profit switching however there are some improvements that can be made here.
- Firstly in Options - Profit Switching there isnt a way to enable and disable only using the services setup in User defined online services, currently i enable Nicehash but manually exclude each Nicehash aogo from the Online Services - Predefined online services section for it to just focus on the User defined online services
- The Predefined online services allow for bulk editing whereas the User defined online services dont allow for this, can this be added please?
- When algos are added to the User defined online services section, does AM benchmarking include/look at algos that have been setup in that section?

Thanks Moppidoo, very relevant feedback and thanks for the further clarifications.

They should show up in Online Services Tab once setup and enabled.

Make sure Options -> Profit Switching you have checked MPH with username.rigname information you registered with MPH

Make sure Online Services in each user defined, that they say Yes in the Profit Switching Column, if not, edit and check include in profit switching.

lastly, make sure in Online Services Tab, lower left corner, Display Services, MPH is ticked and not filtered out.

Thanks for the help, that makes sense. I've been able to benchmark CryptonightV7 after creating a "user defined online service" for MiningPoolHub (as I don't use Nicehash atm). Is it normal the "user defined online service" doesn't show up in the Online Services tab? I'm not sure if that's how it's supposed to be.

Like the Dev said a few posts above, you need a pool setup along with enabled software + algo to benchmark. Amd just go claymore, unless you have vega and want to use castxmr

Go suprnova if you can't be bothered searching for a pool that suits u best

Latest version of AwesomeMiner added support for Cryptonight-Lite and Cryptonight-Heavy.

What mining software (AMD) supports these algos? I tried all those included with Awesome Miner and I was never offered to benchmark Cryptonight-Lite and Cryptonight-Heavy.

Thanks

How can I get the Raven Miner to work in "Profit Switching" mode? I was able to benchmark Raven Miner but then what should I do to start mining with Raven Miner?
Currently I only use MiningPoolHub and Nicehash: I don't thing RavenMiner is supported there, so first step is probably to register to a new pool.
Any guidance appreciated!
thanks

Yes thank you Patrike! I'm already experiencing less unnecessary switching and seemly more consistent earnings client side, have to keep mining going longer to see the effect reflected on earning but I expect that to be much better than before.

Confirming what @smartieee said, the actions don't seem to execute properly even though the condition triggered. I initially was using the "profit switching" action + notification to see it in effect, but the notification while kicked in, nothing happened except the rule starts flooding the Notification tab every 5 seconds. I have hence used a workaround actions for the rule (stop miner -> wait 5s -> start miner) and that does execute the rule actions accordingly no issues.

@Smartieee, I believe the  rule only looks at the current miner's profit/revenue per day in action! rather than the overall profile and periodic calculated overall profit rank, thus right at this moment, it probably doesn't do the auto starting since once your miner stopped, it probably will not be monitored by the rule when idle. I'm pretty sure Patrike can gradually expand this function further in future releases upon how useful ppl find the function to be for them and giving feedback and ideas. Right now for starters, it is already showing signs of great improvement with the first release of the feature.

Once again, thank you Patrike!

Hi Patrick, thanks for the update!

Regarding the new rule: New rule trigger for miner revenue and profit levels
Its quite a simple rule to setup and I setup a rule for profit (and later revenue) where the miner stops mining when the profit is less 5 South African Rand (then I later put in 500 South African Rand to test this), the time was set to 5 seconds to stop the miner. Unfortunately the rule wouldnt trigger on any of my miners but did work when I manually ran the rule.
If the above rule worked would it also start the miner automatically when the miner is above the profit or revenue threshold specified or do I need to setup an additional rule to start the miner after X amount of profit or revenue?

Also the other day I wrote:
One of my pet peeves with AM is the options screen fixed size.  I see that you made the benchmarks screen where the screen size could be adjusted with the mouse.  Would it be possible to do the same with the options screen and also add if you double click on the header/title panel of that screen it expands to fill the available space on a monitor?
I am one of those snobs that has AM setup in my lounge PC with 150% display scaling on my monitor. The options screen is cut-off from the bottom so I cant click "OK" without lowering the display scaling specifically for AM before putting it back to 150%.  I understand that this is an edge case but maybe there are other users that has AM setup with non standard display scaling on their monitor.
Is this something you might be able to consider or is it too edge case/low priority/pain in the a$$?

Thanks!

Patrike,

Would it be possible to add blazepool support for manged profit miners? With all the issues with some of the pools lately it would be nice to have more options available.

Patrick, can you suport Xmrig ? i cant have it to run... Must we config anyting? i checked the treads detected and they are fine but always geting cuda error... and it dont start mining.

I tested Nicehash aplication with current gpu clocks and it works fine. 2.2Khs on my 5 GPU

Also can you give suport for escavator 1.5? that would work.

Starting Diagnostics. Awesome Miner version: 4.7
Starting Mining Software
Setting up Miner Engine. Instance: 3
Engine Type: XmRigNvidiaMiner, Auto Download: True, EnginePath: C:\Users\migue\AppData\Local\AwesomeMiner\xmrig-nvidia-2.5.2_2\xmrig-nvidia.exe, Subtype: Disabled, CustomExecutable:
Set clocking start profile: 4, ETH Rig1 (when stopping, the following will be used: -1, type: Single, Use: False)
Added rule for: C:\Users\migue\AppData\Local\AwesomeMiner\xmrig-nvidia-2.5.2_3\xmrig-nvidia.exe
C:\Users\migue\AppData\Local\AwesomeMiner\xmrig-nvidia-2.5.2_3\xmrig-nvidia.exe  -o stratum+tcp://cryptonightv7.eu.nicehash.com:3363 -u 36UA5oFjrKkf7AodthsMA4ZrhPtHgM5txE -p x --api-port 4030    (WindowMode: ConsoleFormat, EngineType: XmRigNvidiaMiner, IsProfitMiner: False)
Configuration:

Mining Engine Process started, PID: 11620

====================================================================================================
>  * VERSIONS:     XMRig/2.5.2 libuv/1.19.2 CUDA/9.10 MSVC/2015
>  * CPU:                  Intel(R) Core(TM) i3-3240 CPU @ 3.40GHz (1) x64 -AES-NI
>  * GPU #0:       GeForce GTX 1060 3GB @ 1784/4004 MHz 26x27 6x25 arch:61 SMX:9
>  * GPU #1:       GeForce GTX 1060 3GB @ 1759/4004 MHz 26x27 6x25 arch:61 SMX:9
>  * GPU #2:       GeForce GTX 1060 3GB @ 1759/4004 MHz 26x27 6x25 arch:61 SMX:9
>  * GPU #3:       GeForce GTX 1060 3GB @ 1784/4004 MHz 26x27 6x25 arch:61 SMX:9
>  * GPU #4:       GeForce GTX 1060 3GB @ 1759/4004 MHz 26x27 6x25 arch:61 SMX:9
>  * ALGO:         cryptonight, donate=5%
>  * POOL #1:      cryptonightv7.eu.nicehash.com:3363
>  * API PORT:     4030
>  * COMMANDS:     'h' hashrate, 'e' health, 'p' pause, 'r' resume
> [2018-04-09 17:59:21] use pool cryptonightv7.eu.nicehash.com:3363 159.8.13.236
> [2018-04-09 17:59:21] new job from cryptonightv7.eu.nicehash.com:3363 diff 100001
> [CUDA] Error gpu 1: :277 "the launch timed out and was terminated"

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration
Diagnostics completed

lots of HW Error. shows not the correct speed. 380kh/s.
6RX480 8Gb. there must be a minimum of 42Mh/s

Thanks. Finally I managed to do what I wanted by editing custom profiles.
I have another cuestion. Is it possible to set up a new pool without a coin asociated? And add it later, or choose between some.
As fas as I've seen, there is no way to link coins and wallets, isn't it?

Hi. Please share more details what the error is. It's also recommended to start the miner with the Diagnostics button, and use the GPU mining troubleshooting guide to resolve some of the common problems:
http://www.awesomeminer.com/help/troubleshooting-gpu.aspx

Most mining software, including XMRig, requires a pool in order to be benchmarked. Do you have a pool enabled for the profit switcher (Options dialog, Profit switching section) where CryptonightV7 is available, for example Nicehash?

Hi patrike. I think I'm experiencing a bug in the latest version. I'm trying to mine CryptonightV7 with nVidia GPU's but I can't get the benchmark going.
Here are the steps I've taken. in the setting I've enabled the CryptonightV7 algorythm. In managed software I enabled XMRig nVidia Miner 2.5.2. In the nVidia GPU profit profile I do see the CryptonightV7 algorythm and the XMRig nVidia Miner mining software is enabled too.
Still when I go to the benchmark menu CryptonightV7 is not there. I've also tried to point AM to manually downloaded miner to no avail. Any help would be greatly appreciated.

EDIT: just for testing I tried configuring Cryptonight-Lite and it IS showing up in the benchmark menu! So there is definitely something werid going on.

6xRX480 "x16r" sgminer on zergpool, does not work.
help