[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 402.

akadamson

member

Activity: 140

Merit: 18

Is the default setup for profit mining a good one to start with? Specifically, what time duration, % change are people have good success with? I have most everything turned on... on 1080Ti's (6) and am using Zpool, MPH, and ahashpool (I turned on zergpool for a while, but it seems it never pays Sad

... unless it stuck behind some mandatory hold timer, I mined there for 10 hours and everything is in the exchange, nothing has cleared).

Anyway, just looking for a good starting point and process and proposed BTC/day for the above? looking for any suggestions.

soothaa

hero member

Activity: 1151

Merit: 528

AwesomeMiner Coin Updater 0.2 (Requires AwesomeMiner 4.4.7 Dev or 4.5 Release)

Changed away from nethash to difficulty measurements (delete your LocalCoinData.json file)
Now updates all coin properties thanks to new AwesomeMiner HTTP APIs
You no longer have to add custom coins, they are created for you thanks to new AwesomeMiner HTTP APIs
Updated config.json to support these new changes. You MUST update your custom coins to the new format.
Made the error messages more obvious about what is going on

You can find the latest update here: https://bitcointalksearch.org/topic/awesomeminer-coin-updater-version-100-plugin-2979494

byk.cmf

newbie

Activity: 2

Merit: 0

Quote from: puwaha on February 28, 2018, 12:34:56 AM

Quote from: byk.cmf on February 27, 2018, 02:20:04 PM

Hi,

Using version 4.5.0, I am trying to develop a script which is supposed to turn off and turn on a smart plug if certain miner goes offline. To do so, I have defined a custom rule which uses "Detect offline, 180 seconds" as a trigger and as an action, I use "Run executable" which takes an .exe file which looks up smart plug IP based on miner hostname and restarts the smart plug. It all runs fine, if script manages to execute well and restart the plug, however, if there is an error, like plug is offline for any reason or the farm which is offline isn't equipped with the plug, AwesomeMiner keeps triggering my executable every couple of seconds. So the question is: is there a functionality when choosing "Run executable" action to perform it only fixed number of times? For example, if miner went offline, I would try to restart associated smart plug 3 times, if there is one, and, if it doesn't work for any reason (plug lost network or no plug is installed on that miner), I don't want executable to be called anymore.

Thanks a lot for help in advance!

You probably need some waits in the actions to allow the rig to power back on. Otherwise, the rule will get triggered again.

Check out my version of what you are trying to do with Awesome Miner and Smart Plugs. I use IFTTT to integrate the Smart Plugs and Awesome Miner.

https://bitcointalksearch.org/topic/m.29694068

Thanks for sharing your experience. I have already added "Wait" to give miner some time to boot up, however, the major problem is that on my farm there are a lot of machines that are not equipped with plugs. To get a bit more technical, I maintain a file which stores a mapping from miner name to IP address of associated smart plug, but if miner isn't equipped with a plug, an executable that powers plugs on/off simply finds no matching IP and exits. But AwesomeMiner keeps triggering it again and again.

The only solution I can think of is use "Only apply to selected miners" and chose only those that are equipped with a plug.

baf28

newbie

Activity: 117

Merit: 0

bminer does not start, produces an empty string in the console

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: O-Coin on February 27, 2018, 10:25:30 PM

Updated to V4.5 Any detailed info on setting up mining Dutch? I had it mining it showed most profitable in details but nothing showing in coin total per day.
I made an account on mining dutch and used my User name as worker (Username.1). But doesnt seem to be working correctly

Any help much appreciated

Did you setup the workers on Mining Dutch in the same format? username.rigname

A lot of mining pools want you to do this like Suprnova and MPH for instance. Some pools will auto-create the miner for you, but I setup the workers on the pool first just to make sure there are no errors.

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: jisupol250 on February 27, 2018, 09:48:58 PM

Please add new pool for Managed Profit Switcher : phi-phi-pool.com Cry

You could add the individual pools available on this site as a pool group and set profit-switching to the pool group.

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: RTSARC on February 27, 2018, 05:05:32 PM

Any chance in a future update there could be a feature that caps the amount of time Awesome Miner will remain on a single algo when profit switching? For example, if PHI (or any algo) remains most profitable and is mined for say 10 minutes straight (or through 5 consecutive 2min Switching Interval checks) have a setting that would cause AM to switch to the next most profitable algo and put PHI on timeout/cooldown for a configurable amount of time after which the profit switching profile would take it back into consideration. Perhaps per algo in Options -> Online Services a setting like "Max Continuous Mining Duration Before Forced Switch" or "Max Time Active" paired with that a setting that could remove the algo from profit switching consideration for a configurable amount of time if it triggers the previous setting so it doesn't just immediately switch back next Switching Interval check. Either that if per algo is too much to implement, the 2 settings could just apply to all algos and be configured under Options --> Profit Switching right were Switching Interval and Profit switch Threshold are configured

My thinking is that with tuning these settings could help AM from getting stuck on a single algo for too long with a high ttf that isn't finding blocks. Anyway, thanks for the Awesome software and the continuous updates!

I'm confused by this, but I'm sure you have a good reason for wanting this. This behavior runs counter to what profit-switching is for. I think Patrike has said he would look into adding profit-switching triggers and actions, so maybe this could be set in a future version.

puwaha

sr. member

Activity: 700

Merit: 294

Quote from: byk.cmf on February 27, 2018, 02:20:04 PM

Hi,

Using version 4.5.0, I am trying to develop a script which is supposed to turn off and turn on a smart plug if certain miner goes offline. To do so, I have defined a custom rule which uses "Detect offline, 180 seconds" as a trigger and as an action, I use "Run executable" which takes an .exe file which looks up smart plug IP based on miner hostname and restarts the smart plug. It all runs fine, if script manages to execute well and restart the plug, however, if there is an error, like plug is offline for any reason or the farm which is offline isn't equipped with the plug, AwesomeMiner keeps triggering my executable every couple of seconds. So the question is: is there a functionality when choosing "Run executable" action to perform it only fixed number of times? For example, if miner went offline, I would try to restart associated smart plug 3 times, if there is one, and, if it doesn't work for any reason (plug lost network or no plug is installed on that miner), I don't want executable to be called anymore.

Thanks a lot for help in advance!

You probably need some waits in the actions to allow the rig to power back on. Otherwise, the rule will get triggered again.

Check out my version of what you are trying to do with Awesome Miner and Smart Plugs. I use IFTTT to integrate the Smart Plugs and Awesome Miner.

https://bitcointalksearch.org/topic/m.29694068

O-Coin

jr. member

Activity: 61

Merit: 2

Updated to V4.5 Any detailed info on setting up mining Dutch? I had it mining it showed most profitable in details but nothing showing in coin total per day.
I made an account on mining dutch and used my User name as worker (Username.1). But doesnt seem to be working correctly

Any help much appreciated

jisupol250

newbie

Activity: 108

Merit: 0

Please add new pool for Managed Profit Switcher : phi-phi-pool.com Cry

asiaamal1

newbie

Activity: 84

Merit: 0

I have never done mining, I just tried to understand it. thank you for the information that has been given by you very useful for me Wink

Regulater

member

Activity: 273

Merit: 12

Any chance for a mobile app integration that can be used on a smart watch?

RTSARC

newbie

Activity: 3

Merit: 0

Any chance in a future update there could be a feature that caps the amount of time Awesome Miner will remain on a single algo when profit switching? For example, if PHI (or any algo) remains most profitable and is mined for say 10 minutes straight (or through 5 consecutive 2min Switching Interval checks) have a setting that would cause AM to switch to the next most profitable algo and put PHI on timeout/cooldown for a configurable amount of time after which the profit switching profile would take it back into consideration. Perhaps per algo in Options -> Online Services a setting like "Max Continuous Mining Duration Before Forced Switch" or "Max Time Active" paired with that a setting that could remove the algo from profit switching consideration for a configurable amount of time if it triggers the previous setting so it doesn't just immediately switch back next Switching Interval check. Either that if per algo is too much to implement, the 2 settings could just apply to all algos and be configured under Options --> Profit Switching right were Switching Interval and Profit switch Threshold are configured

My thinking is that with tuning these settings could help AM from getting stuck on a single algo for too long with a high ttf that isn't finding blocks. Anyway, thanks for the Awesome software and the continuous updates!

Shazam!!!

full member

Activity: 350

Merit: 158

#takeminingback

I've been using Awesome Miner for a few days now, and it's been seriously helpful! I'm away from my setup for about 10hrs a day, and
it's very reassuring to have access, and the ability to restart remotely. If I run into any issues, I'll post here. Keep up the GREAT work!

Jefke007

newbie

Activity: 1

Merit: 0

Hello,

I'm using the awsome miner now but running into a issue. I changed the Workername and the bitcoin adres in override pool settings of the managed profit miner properties.
But the will not override the settings in de option menu.
I still see worker name and bitcoin adres from the Options -> Profit switching

Can somebody help me with these override settings ?

supersonic

full member

Activity: 195

Merit: 104

Hi, is it posible to set more than 3 default pools for antminer? If i put pool group it works untill unit resets, then only 3 default are left. And for profit switcher would be nice to have more. Cheers

byk.cmf

newbie

Activity: 2

Merit: 0

Hi,

Using version 4.5.0, I am trying to develop a script which is supposed to turn off and turn on a smart plug if certain miner goes offline. To do so, I have defined a custom rule which uses "Detect offline, 180 seconds" as a trigger and as an action, I use "Run executable" which takes an .exe file which looks up smart plug IP based on miner hostname and restarts the smart plug. It all runs fine, if script manages to execute well and restart the plug, however, if there is an error, like plug is offline for any reason or the farm which is offline isn't equipped with the plug, AwesomeMiner keeps triggering my executable every couple of seconds. So the question is: is there a functionality when choosing "Run executable" action to perform it only fixed number of times? For example, if miner went offline, I would try to restart associated smart plug 3 times, if there is one, and, if it doesn't work for any reason (plug lost network or no plug is installed on that miner), I don't want executable to be called anymore.

Thanks a lot for help in advance!

geck

member

Activity: 145

Merit: 10

just installed it and love the new features! Would it be possible to put in an actual BTC/day column in the balance page?

Quote from: patrike on February 27, 2018, 06:21:49 AM

Awesome Miner version 4.5

- Pool Balance to display unpaid balance and recent payouts for the mining pools supported by the profit switcher
- New pool for Managed Profit Switcher and profitability information: Zergpool
- New pool for Managed Profit Switcher and profitability information: Mining Dutch
- New pool for profitability information: D3pool
- New mining software support: Bminer for Equihash
- New mining software support: PhoenixMiner for Ethereum
- New mining software support: Claymore NeoScrypt AMD Miner for Neoscrypt
- Awesome Miner HTTP API for adding, updating and removing user defined coins with profit information
- Awesome Miner HTTP API for adding, updating and removing pools
- Avalon 8 ASIC support
- Performance improvements to the Options dialog
- Added CORS support for built-in web server
- New rule action to apply a Profit Profile to a miner
- Support for wallet balance for Verge and Digibyte
- Coin exchange rates in the status bar will always use the current exchange rate, independent from the coin statistics settings in the Options dialog
- Czech Koruna added as display currency
- Notification messages related to mining software crashes includes information about mining software and algorithm to improve troubleshooting
- Updated WhatToMine integration, to adjust to their latest change of Myriad-Groestl algorithm naming
- Ccminer KlausT 8.20 added
- CastXMR 0.8.5
- DSTM ZCash miner 0.6
- CpuMiner-Opt 3.8.2.1
- Corrections to the profit switcher to correctly ignore dual mining algorithms if disabled in the profit profile and to reload settings correctly when the restart operation is performed
- Minor corrections

bynight4

newbie

Activity: 1

Merit: 0

Hello,
I've just installed the new V4.5; I'm having issues with the balance options;
It won't let me right click anywhere in the balance page, in order to remove/edit things, and when using 'options > balance' or clicking on 'configure balance' it shows a blank page. Clicking in that page on edit - shows some of the info, but doesn't show all my current balance setup. Changing anything in there creates a mess (it overrides some of the current info, but not categorizing it under the right pool etc.).
Any idea what's going on w/ that?
Thanks!

Edit:
Ok, I found out SOME stuff, but not a solution to all of it; it seems like the new version automatically adds (though doesn't let you edit from within the balance configuration page) - the current profit switching miners. On the other hand, it doesn't let you edit those from there, nor it displays them to you in the configuration page, nor it lets you do anything w/ right clicking on the main balance page. It also lets you add addresses per specific pools, w/o the need to write the long strings manually as it used to. So that's nice and makes it easy to add pools, but I'd still like to edit/remove things - by using right click, or any other way...

hesitatd

newbie

Activity: 16

Merit: 0

Quote from: Storx on February 26, 2018, 08:35:58 PM

Quote from: hesitatd on February 26, 2018, 06:46:51 PM

Hi lads.
My hardware is GTX 1070 and 1050Ti and i want to solo mine Ethereum. Is anyone having a problem with Excavator 1.4.4a while mining Eth?

It mines for few minutes normally, but then excavator crashes, restarts and selects to mine any other algo set but ethereum
And if i click "View Details" on my Profit Miner, on the Profit Switching list, in the Profit per Day column, it shows that it "Failed". Also, when i switch to Claymore right after the Excavator crashes, it can't connect to the pool, but after minute or two, it connects. Claymore itself mines Eth without any problems.

This problem occurs with every next Excavator run, no matter what the memory and core clocks are set.

I have 8 GB of RAM and i set 13 GB minimum for Pagefile. What can be the potential cause of this?

I have had similar issues with excavator, so i removed it from my current lineup of software i use....

A little rumor running around is that in one of the more recent versions of Excavator, there is a bit of code that makes it "less stable" if the stratum address isnt one of the ones listed from nicehash...

I just found out what i didn't noticed before, besides that sometimes first one or two jobs are accepted, Excavator rejects all next jobs (Job not found) and propably that's why it shuts down.
Im using mininghubpool, didn't used other pools. I tried to run Excavator from .bat without Awesome miner, and it works same, no matter if i set port for single or for all coins. Maybe you were right about Excavator's pool "fussiness".

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 402. (Read 703148 times)