Awesome Miner version 8.7.3
ASIC mining
- Improved support support for Antminer S19j and S19j Pro
Features
- Device Power Usage trigger can be configured to compare the power usage with an ideal value specified in a Profit Profile
Mining software
- Gminer 2.66
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 42. (Read 703583 times)
August 30, 2021, 07:05:06 AM
August 25, 2021, 08:20:21 AM
Awesome Miner version 8.7.2
Features
- Information column can be configured to display the number of dead devices for a miner
Improvements
- Improved pool matching for ASIC miners to display the correct pool name based on the reported pool details
Mining software
- NbMiner 39.1
- SrbMiner-Multi 0.8.0
- PhoenixMiner 5.7b
Corrections
- Correction to the list of available Managed Templates and External Templates in the rules didn't include any newly added templates.
- Correction to GPU clocking behavior when only specific GPUs were selected for a Managed Miner in combination with applying a specific GPU Clocking Profile, to ensure the profile was only applied to the GPUs selected for this Managed miner.
Features
- Information column can be configured to display the number of dead devices for a miner
Improvements
- Improved pool matching for ASIC miners to display the correct pool name based on the reported pool details
Mining software
- NbMiner 39.1
- SrbMiner-Multi 0.8.0
- PhoenixMiner 5.7b
Corrections
- Correction to the list of available Managed Templates and External Templates in the rules didn't include any newly added templates.
- Correction to GPU clocking behavior when only specific GPUs were selected for a Managed Miner in combination with applying a specific GPU Clocking Profile, to ensure the profile was only applied to the GPUs selected for this Managed miner.
August 25, 2021, 08:19:18 AM
Hi Patrike, can you pls. add a rule action where user can apply a set of active online services (or simple switch on/off some services). So user can apply a low energy algos set. For example: at the night, whenn solar panels not deliver energy. Regards.
You can make 2 profit profiles and can switch it via rule. Make 1 for high energy algos and 1 for low energy algos.
But sure i am agree, switch off and on some online services via rule would be nice.
August 20, 2021, 08:43:03 AM
Hi Patrike, can you pls. add a rule action where user can apply a set of active online services (or simple switch on/off some services). So user can apply a low energy algos set. For example: at the night, whenn solar panels not deliver energy. Regards.
You can make 2 profit profiles and can switch it via rule. Make 1 for high energy algos and 1 for low energy algos.
But sure i am agree, switch off and on some online services via rule would be nice.
August 20, 2021, 05:00:25 AM
Hi Patrike, can you pls. add a rule action where user can apply a set of active online services (or simple switch on/off some services). So user can apply a low energy algos set. For example: at the night, whenn solar panels not deliver energy. Regards.
You can make 2 profit profiles and can switch it via rule. Make 1 for high energy algos and 1 for low energy algos.
But sure i am agree, switch off and on some online services via rule would be nice.
August 19, 2021, 07:38:44 PM
Hi Patrike, can you pls. add a rule action where user can apply a set of active online services (or simple switch on/off some services). So user can apply a low energy algos set. For example: at the night, whenn solar panels not deliver energy. Regards.
August 19, 2021, 09:11:43 AM
Awesome Miner version 8.7.1
ASIC mining
- Introduce concept of External Templates, to apply settings from a template to External Miners. Configurable in the Options dialog, External Miners section.
- Added rule action to apply External Template
User interface
- Moved Managed Template configuration to a new tab in the the Managed Miners section of the Options dialog
Mining software
- Gminer 2.65
Corrections
- Correction to Remote Host list for Managed Miners to correctly include Cloud Connected hosts
ASIC mining
- Introduce concept of External Templates, to apply settings from a template to External Miners. Configurable in the Options dialog, External Miners section.
- Added rule action to apply External Template
User interface
- Moved Managed Template configuration to a new tab in the the Managed Miners section of the Options dialog
Mining software
- Gminer 2.65
Corrections
- Correction to Remote Host list for Managed Miners to correctly include Cloud Connected hosts
August 19, 2021, 08:42:09 AM
hey guys did anyone know how to fix this ? i use cloud feature,can connect it no problem to the cloud on my remote miner. on my main pc it showed it on managed host but I cannot seem to add it on managed miner? only local option avail.i test the connection on managed host and its all fine, and its connected as well on the cloud. picture as attached https://ibb.co/yPdS39L and https://ibb.co/fD32hsB
if anyone can help my discord is RememberMe#9441 to talk more private thanks
Hello. There is an issue in v8.7 related to the list of Remote Hosts for Managed Miners. This will be corrected in the next release - and it isn't far away. Thanks for your feedback! if anyone can help my discord is RememberMe#9441 to talk more private thanks
August 18, 2021, 07:35:21 AM
hey guys did anyone know how to fix this ? i use cloud feature,can connect it no problem to the cloud on my remote miner. on my main pc it showed it on managed host but I cannot seem to add it on managed miner? only local option avail.i test the connection on managed host and its all fine, and its connected as well on the cloud. picture as attached https://ibb.co/yPdS39L and https://ibb.co/fD32hsB
if anyone can help my discord is RememberMe#9441 to talk more private thanks
if anyone can help my discord is RememberMe#9441 to talk more private thanks
August 17, 2021, 04:11:30 PM
Awesome Miner version 8.7
ASIC mining
- Improved support for StrongU ASIC miners, including display of fan speed
- Display of Whatsminer ASIC error codes on the summary tab
Features
- Italian translation included
- Global hashrate trigger. Looks at the total hashrate of all miners instead of individual miners.
- Remove miner trigger
- Time trigger includes configuration for triggering on a specific day of the month
- Mining History export includes total energy consumption (kWh)
User interface
- Improved display of coins and algorithms on the Dashboard of the web interface
- Hide pool operations not relevant for Managed Miners
- Updated order of the action list for rules
Mining software
- Gminer 2.64
- SrbMiner-Multi 0.7.9
- T-Rex 0.21.6
- NbMiner 29.0
- XmRig 6.14.1
- Nanominer 3.3.8
Corrections
- Corrections to pool balance display
ASIC mining
- Improved support for StrongU ASIC miners, including display of fan speed
- Display of Whatsminer ASIC error codes on the summary tab
Features
- Italian translation included
- Global hashrate trigger. Looks at the total hashrate of all miners instead of individual miners.
- Remove miner trigger
- Time trigger includes configuration for triggering on a specific day of the month
- Mining History export includes total energy consumption (kWh)
User interface
- Improved display of coins and algorithms on the Dashboard of the web interface
- Hide pool operations not relevant for Managed Miners
- Updated order of the action list for rules
Mining software
- Gminer 2.64
- SrbMiner-Multi 0.7.9
- T-Rex 0.21.6
- NbMiner 29.0
- XmRig 6.14.1
- Nanominer 3.3.8
Corrections
- Corrections to pool balance display
July 30, 2021, 06:16:21 AM
Awesome Miner version 8.6.2
GPU mining
- nVidia Memory temperature and Hotspot temperature display on Windows. Note: Memory temperature sensors are only available on nVidia RTX 3080 and 3090.
Mining software
- T-Rex 0.21.5
- NbMiner 38.2
Corrections
- Correction to execution of batch commands on Linux
Memory and Hotspot temperature: Awesome Miner support this for all compatible AMD GPUs on Windows and Linux and all compatible nVidia GPUs on Windows.
For nVidia GPUs on Linux it's simply not support by nVidia yet, but they have communicated they are working on adding support for it.
GPU mining
- nVidia Memory temperature and Hotspot temperature display on Windows. Note: Memory temperature sensors are only available on nVidia RTX 3080 and 3090.
Mining software
- T-Rex 0.21.5
- NbMiner 38.2
Corrections
- Correction to execution of batch commands on Linux
Memory and Hotspot temperature: Awesome Miner support this for all compatible AMD GPUs on Windows and Linux and all compatible nVidia GPUs on Windows.
For nVidia GPUs on Linux it's simply not support by nVidia yet, but they have communicated they are working on adding support for it.
July 27, 2021, 10:49:15 AM
Awesome Miner version 8.6.1
ASIC mining
- Default Pools operation made more flexible to allow entering pool details without having to add the pool to Awesome Miner first
Features
- The Miner Command action can be configured to shutdown a computer running Remote Agent
- Display of last running time for miners, indicating the time of the last successful API response from the miner. Can also be displayed in the Information column.
Mining software
- TeamRedMiner 0.8.4
- Gminer 2.63
- SrbMiner-Multi 0.7.8
- CpuMiner-Opt 3.17.1
Corrections
- Correction to 2miner.com ETC pool balance
- Correction to the operation to move miners to another group via the web interface
ASIC mining
- Default Pools operation made more flexible to allow entering pool details without having to add the pool to Awesome Miner first
Features
- The Miner Command action can be configured to shutdown a computer running Remote Agent
- Display of last running time for miners, indicating the time of the last successful API response from the miner. Can also be displayed in the Information column.
Mining software
- TeamRedMiner 0.8.4
- Gminer 2.63
- SrbMiner-Multi 0.7.8
- CpuMiner-Opt 3.17.1
Corrections
- Correction to 2miner.com ETC pool balance
- Correction to the operation to move miners to another group via the web interface
July 27, 2021, 10:48:41 AM
Memory Temps added now , great job, Now Awesome Miner is legendary!!
Thanks for your nice feedback.The feature to display memory temperature is however not fully supported on nVidia yet - but the plan is to improve this as well.
July 27, 2021, 10:22:14 AM
Memory Temps added now , great job, Now Awesome Miner is legendary!!
Thanks for your nice feedback.The feature to display memory temperature is however not fully supported on nVidia yet - but the plan is to improve this as well.
In Both of my rigs its working perfectly with NVIDIA cards and Windows
July 27, 2021, 08:44:39 AM
Patrike, can you please implement a easy way to execute a linux commands from AM profit profile. At the moment i have a problem if i use miners command --lock-cclock
After using this command and later after switching to other mining programm GPU core clock still have value from last --lock-cclock call. But not ervery mining programm have option to lock core clock. If once core clock was locked, i cant change values with simple overclocking. This state must be reseted. Only a way to use a "nvidia-smi -rgc" command before or after mining process. But at the moment AM not have possibility to run commands on Linux side without opening separate cmd process window. Even this command:
plink -no-antispoof -ssh [email protected] -pw myPassword sudo nvidia-smi -rgc (plink is a part of putty installation package)
not work from "ProfitProfile->Batch commands" section, but work perfect from cmd window.
I have try to execute a simple windows command: C:\Windows\System32\cmd.exe to test if something happens in ProfitProfile->Batch commands. Its happens nothing. CMD window will not be opened. For which commands type this "batch commands fields" is? Cant find documentation for that.
Regards.
Hi,After using this command and later after switching to other mining programm GPU core clock still have value from last --lock-cclock call. But not ervery mining programm have option to lock core clock. If once core clock was locked, i cant change values with simple overclocking. This state must be reseted. Only a way to use a "nvidia-smi -rgc" command before or after mining process. But at the moment AM not have possibility to run commands on Linux side without opening separate cmd process window. Even this command:
plink -no-antispoof -ssh [email protected] -pw myPassword sudo nvidia-smi -rgc (plink is a part of putty installation package)
not work from "ProfitProfile->Batch commands" section, but work perfect from cmd window.
I have try to execute a simple windows command: C:\Windows\System32\cmd.exe to test if something happens in ProfitProfile->Batch commands. Its happens nothing. CMD window will not be opened. For which commands type this "batch commands fields" is? Cant find documentation for that.
Regards.
Please note that the "Batch commands" for a Profit Profile are configured per Algorithm. It isn't applied for all algorithms. When I try it for a specific algorithm, I can simply enter "cmd.exe" and it will launch a command window when I start the miner with this specific algorithm. Can you please double check that it was configured for the correct algorithm?
For nvidia-smi I think it relates to that it must be started with sudo, but your workaround should probably work as well given that it's actually executed for the specific algorithm.
Also nothing happens if i try to call cmd.exe from "Managed profit miner properties"->"Command Line"->"Execute additional commands" and nothing if i call from "Profit profile propertis"->"Batch commands"->"Execute additional commands"
I dont know whats wrong with my AM. its looks so simple und logicaly to add this functionality, but for me simple not work.... And in log file nothing.
July 27, 2021, 05:50:59 AM
Patrike, can you please implement a easy way to execute a linux commands from AM profit profile. At the moment i have a problem if i use miners command --lock-cclock
After using this command and later after switching to other mining programm GPU core clock still have value from last --lock-cclock call. But not ervery mining programm have option to lock core clock. If once core clock was locked, i cant change values with simple overclocking. This state must be reseted. Only a way to use a "nvidia-smi -rgc" command before or after mining process. But at the moment AM not have possibility to run commands on Linux side without opening separate cmd process window. Even this command:
plink -no-antispoof -ssh [email protected] -pw myPassword sudo nvidia-smi -rgc (plink is a part of putty installation package)
not work from "ProfitProfile->Batch commands" section, but work perfect from cmd window.
I have try to execute a simple windows command: C:\Windows\System32\cmd.exe to test if something happens in ProfitProfile->Batch commands. Its happens nothing. CMD window will not be opened. For which commands type this "batch commands fields" is? Cant find documentation for that.
Regards.
Hi,After using this command and later after switching to other mining programm GPU core clock still have value from last --lock-cclock call. But not ervery mining programm have option to lock core clock. If once core clock was locked, i cant change values with simple overclocking. This state must be reseted. Only a way to use a "nvidia-smi -rgc" command before or after mining process. But at the moment AM not have possibility to run commands on Linux side without opening separate cmd process window. Even this command:
plink -no-antispoof -ssh [email protected] -pw myPassword sudo nvidia-smi -rgc (plink is a part of putty installation package)
not work from "ProfitProfile->Batch commands" section, but work perfect from cmd window.
I have try to execute a simple windows command: C:\Windows\System32\cmd.exe to test if something happens in ProfitProfile->Batch commands. Its happens nothing. CMD window will not be opened. For which commands type this "batch commands fields" is? Cant find documentation for that.
Regards.
Please note that the "Batch commands" for a Profit Profile are configured per Algorithm. It isn't applied for all algorithms. When I try it for a specific algorithm, I can simply enter "cmd.exe" and it will launch a command window when I start the miner with this specific algorithm. Can you please double check that it was configured for the correct algorithm?
For nvidia-smi I think it relates to that it must be started with sudo, but your workaround should probably work as well given that it's actually executed for the specific algorithm.
Also nothing happens if i try to call cmd.exe from "Managed profit miner properties"->"Command Line"->"Execute additional commands" and nothing if i call from "Profit profile propertis"->"Batch commands"->"Execute additional commands"
I dont know whats wrong with my AM. its looks so simple und logicaly to add this functionality, but for me simple not work.... And in log file nothing.
July 27, 2021, 05:21:17 AM
Memory Temps added now , great job, Now Awesome Miner is legendary!!
Thanks for your nice feedback.The feature to display memory temperature is however not fully supported on nVidia yet - but the plan is to improve this as well.
July 27, 2021, 05:20:30 AM
Patrike, can you please implement a easy way to execute a linux commands from AM profit profile. At the moment i have a problem if i use miners command --lock-cclock
After using this command and later after switching to other mining programm GPU core clock still have value from last --lock-cclock call. But not ervery mining programm have option to lock core clock. If once core clock was locked, i cant change values with simple overclocking. This state must be reseted. Only a way to use a "nvidia-smi -rgc" command before or after mining process. But at the moment AM not have possibility to run commands on Linux side without opening separate cmd process window. Even this command:
plink -no-antispoof -ssh [email protected] -pw myPassword sudo nvidia-smi -rgc (plink is a part of putty installation package)
not work from "ProfitProfile->Batch commands" section, but work perfect from cmd window.
I have try to execute a simple windows command: C:\Windows\System32\cmd.exe to test if something happens in ProfitProfile->Batch commands. Its happens nothing. CMD window will not be opened. For which commands type this "batch commands fields" is? Cant find documentation for that.
Regards.
Hi,After using this command and later after switching to other mining programm GPU core clock still have value from last --lock-cclock call. But not ervery mining programm have option to lock core clock. If once core clock was locked, i cant change values with simple overclocking. This state must be reseted. Only a way to use a "nvidia-smi -rgc" command before or after mining process. But at the moment AM not have possibility to run commands on Linux side without opening separate cmd process window. Even this command:
plink -no-antispoof -ssh [email protected] -pw myPassword sudo nvidia-smi -rgc (plink is a part of putty installation package)
not work from "ProfitProfile->Batch commands" section, but work perfect from cmd window.
I have try to execute a simple windows command: C:\Windows\System32\cmd.exe to test if something happens in ProfitProfile->Batch commands. Its happens nothing. CMD window will not be opened. For which commands type this "batch commands fields" is? Cant find documentation for that.
Regards.
Please note that the "Batch commands" for a Profit Profile are configured per Algorithm. It isn't applied for all algorithms. When I try it for a specific algorithm, I can simply enter "cmd.exe" and it will launch a command window when I start the miner with this specific algorithm. Can you please double check that it was configured for the correct algorithm?
For nvidia-smi I think it relates to that it must be started with sudo, but your workaround should probably work as well given that it's actually executed for the specific algorithm.
July 27, 2021, 05:14:09 AM
Hi Patrike, if i try to download a custom version of MiniZ miner for Linux, the system create wrong file (?smd_process_download=1&download_id=4427_1) instead of normal .gz archive.
Reagards
All built-in versions of MiniZ will give proper ZIP/GZ filenames. If you point to a custom file on the MiniZ web site, they are actually named strangely like in your example. I assume the extract process might fail here.Reagards
July 25, 2021, 07:41:55 PM
Memory Temps added now , great job, Now Awesome Miner is legendary!!
Jump to: