Author

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 522. (Read 703512 times)

legendary
Activity: 3346
Merit: 1094
Does anyone else have it that pools which are configured with privileged api access are gone after a while or after poolissues / miner-reboot ?
It randomly goes back to the config which is set in the webinterface of the miner.

It all relates to the default pools of the Antminer. An Antminer can have up to 3 default pools, and they cannot be set over the API (even if you have Privileged API)

However, Awesome Miner do support setting default pools on the Antminers over SSH, so please use the feature in Tools -> Antminer -> Default Pools for this.
legendary
Activity: 3346
Merit: 1094
Hi patrike,

Here are some of my issues and development suggestions:

   1. Profit switching should also depend on the profit change % (e.g. Nicehash uses %10 to switch to another algo). If any drops happen over this value it should stop and change the miner.
   2. While stratum connection fails for some reason for a long time it should not try infinitely to connect (sometimes you get banned or server could be down), it should switch to the second or third best alternative after some tries (e.g. 5, 10 depending the user input)
   3. For non-homogeneous systems (e.g. with different gpu's with different settings), card by card benchmarking should be available (like nicehash). And depending on the best profit result, every card or card group could mine the best profitable one on itself (e.g. nicehash redirects my 3 asus dual's to dual mining, 2 msi's to equihash, 3 evga's to .... )
   4. When I try to assign the hash rate value coming from the mining process (incremental value in a specific time), it overrides the single card value and writes over the sum of the hash rate onto the current single card's benchmark value. I do not know if it changes the profit calculation but it should be corrected.
   5. Algo/gpu dependent benchmarking could be available. As in nicehash example, it benchmarks every miner with every gpu. It tries both excavator and ewbf for zcash mining; claymore and ethminer for ethereum mining; alexis and tpruvot for keccak etc. and selects the most profitable one while mining. It is done at first while benchmarking.
   6. There is some problem with the alexis version of ccminer. I tried both manualy and with awesome miner but it gives error with my gpus.
   7. Switching to ewbf is not easy, it is getting opened and closed too many times in a short period of time in order to start mining. When I try manually from the bat file it goes perfect.
   8. In longer times, second or third instances of ccminer could start. Both of them mines while lowering the performance of themselves. Third instance is generally passive.

Thanks
Thanks for the feedback, I will use this as input to future improvements.

legendary
Activity: 3346
Merit: 1094
Hi
I am a new user of Awesome miner, just purchased profi edition for testing.
I try to add a new user defined coins like XMG and Bitconnect

My question:

How can i configure a Bitconnect coin for Profit switcher if this coin change difficulty after each block?
I cant find any place in program where i can put a link to Bitconnect API from https://www.blockexperts.com/bcc/api

By XMG coin problem is bigger, this coin change difficulty and block reward after each block.

maybe it is a good idea to implement in next releases functionality for reading coin APIs Huh

Or i do something wrong?

Regards
Hi,
Most Block explorers use different API's, making it impossible for Awesome Miner to be compatible with everything out of the box.

There are some people that write their own C# scripts inside Awesome Miner to connect to custom API's and then set the coin profitability in Awesome Miner based on the data.
legendary
Activity: 3346
Merit: 1094
How to get information from Awesome Miner Remote Agent? Nothing said about it on the help page
Is your question about adding it in the user interface of Awesome Miner? Or to actually get data from it to built something to connect to it?
full member
Activity: 270
Merit: 100
Is it possible to add more profit switching pools , like Multipool, to be able to watch the current profitability?
legendary
Activity: 1754
Merit: 1007
Please add in pool view duration since last submited share or time counter how long miner work on this pool since profit switcher has switched to this pool.
Please add information about actual mined share difficulty.
Please add in miner view actual RPM for miner fans. This is very important information for Antminers.

Regards
jr. member
Activity: 59
Merit: 4
Im having a problem when using profit switching and it tries to switch to cryptonight (SG Miner 5.5.4), the miner keeps crashing.
I'd like to use SG Miner instead of claymore as it performs better with my cards.

The miner starts, and immediately closes once it reads config (doesnt even proceed to the 2nd screen).

Any assistance is greatly appreciated.
full member
Activity: 280
Merit: 100
Does anyone else have it that pools which are configured with privileged api access are gone after a while or after poolissues / miner-reboot ?
It randomly goes back to the config which is set in the webinterface of the miner.
newbie
Activity: 23
Merit: 18
Hi patrike,

Here are some of my issues and development suggestions:

   1. Profit switching should also depend on the profit change % (e.g. Nicehash uses %10 to switch to another algo). If any drops happen over this value it should stop and change the miner.
   2. While stratum connection fails for some reason for a long time it should not try infinitely to connect (sometimes you get banned or server could be down), it should switch to the second or third best alternative after some tries (e.g. 5, 10 depending the user input)
   3. For non-homogeneous systems (e.g. with different gpu's with different settings), card by card benchmarking should be available (like nicehash). And depending on the best profit result, every card or card group could mine the best profitable one on itself (e.g. nicehash redirects my 3 asus dual's to dual mining, 2 msi's to equihash, 3 evga's to .... )
   4. When I try to assign the hash rate value coming from the mining process (incremental value in a specific time), it overrides the single card value and writes over the sum of the hash rate onto the current single card's benchmark value. I do not know if it changes the profit calculation but it should be corrected.
   5. Algo/gpu dependent benchmarking could be available. As in nicehash example, it benchmarks every miner with every gpu. It tries both excavator and ewbf for zcash mining; claymore and ethminer for ethereum mining; alexis and tpruvot for keccak etc. and selects the most profitable one while mining. It is done at first while benchmarking.
   6. There is some problem with the alexis version of ccminer. I tried both manualy and with awesome miner but it gives error with my gpus.
   7. Switching to ewbf is not easy, it is getting opened and closed too many times in a short period of time in order to start mining. When I try manually from the bat file it goes perfect.
   8. In longer times, second or third instances of ccminer could start. Both of them mines while lowering the performance of themselves. Third instance is generally passive.

Thanks
sr. member
Activity: 434
Merit: 251
Can I use awesome miner to profit switch on a Baikal miner?
legendary
Activity: 1754
Merit: 1007
Hi
I am a new user of Awesome miner, just purchased profi edition for testing.
I try to add a new user defined coins like XMG and Bitconnect

My question:

How can i configure a Bitconnect coin for Profit switcher if this coin change difficulty after each block?
I cant find any place in program where i can put a link to Bitconnect API from https://www.blockexperts.com/bcc/api

By XMG coin problem is bigger, this coin change difficulty and block reward after each block.

maybe it is a good idea to implement in next releases functionality for reading coin APIs Huh

Or i do something wrong?

Regards

newbie
Activity: 55
Merit: 0
patrike, can you please add dstm miner for Equihash? It's the very promising miner coz it has more performance againts other Equihash miners.

The second thing. Can you please add Telegram support for notifications?

And the third thing. How to get information from Awesome Miner Remote Agent? Nothing said about it on the help page.

Thank you!
From what I can see, that mining software doesn't provide any API, so there is nothing Awesome Miner can display about the mining for it.
Please teake a look again. This mining sofware provides API interface Smiley

And can you please answer on this:

How to get information from Awesome Miner Remote Agent? Nothing said about it on the help page.

Thank you!
full member
Activity: 270
Merit: 100
full member
Activity: 280
Merit: 100
For external miners what profit switching interval shall be the best? It's good to set it to 1 minutes?

Every poolswitch costs you some profit, because it is a short downtime and you do not calculate the complete round for the pool you used before switching.
Imho such a short timer can shoot you in the foot and decrease your income if minimal price-changes trigger constant pool-hopping. The default of 30 mins should be good.
newbie
Activity: 92
Merit: 0
Hello Patrike,
I encounter sometimes problems with software stuck or crashed and i don't find a way to handle this with rules...
Regarding Awesome Miner, my ring has status "Mining" but below there is "Interface offline".
A simple restart miner can solve the problem, but it seems there's no way for now to handle those cases with rules. Could you add this "Interface offline" option to rules with the possibility to configure a timer. For example, if miner's status is "Mining" but "interface offline" for 60 sec, then we can chose an action.
Is the rule "Offline Detection" enabled in the Options dialog, Rules section? In most cases, that one should figure out these scenarios. What kind of mining software is it that ends up with this problem?

Yes, as you can see in this picture, here's my settings for offline detection :

https://img4.hostingpics.net/pics/557959OfflineOK.jpg


Here's a fresh example of my problem, this time it's ccminer.exe that has crashed :

https://img4.hostingpics.net/pics/624545Problem.jpg

As you can see, my Rig is in "Mining" status, but below, it shows "Interface offline". It would be great to be able to detect this state and make rig reboot for example.
Thanks - now I see the scenario.

It will work better if you configure Windows to not show those crash dialogs and simply terminate the process right away. They are preventing the process from exiting and it will still be considered running by both Windows and Awesome Miner.
Please see this link for instructions: https://superuser.com/a/715645
After that modification, Awesome Miner should detect it as a crash and simply restart the mining process.



Thanks for your advice ! I'm going to try right now !
full member
Activity: 270
Merit: 100
For external miners what profit switching interval shall be the best? It's good to set it to 1 minutes?
legendary
Activity: 3346
Merit: 1094
Hello Patrike,
I encounter sometimes problems with software stuck or crashed and i don't find a way to handle this with rules...
Regarding Awesome Miner, my ring has status "Mining" but below there is "Interface offline".
A simple restart miner can solve the problem, but it seems there's no way for now to handle those cases with rules. Could you add this "Interface offline" option to rules with the possibility to configure a timer. For example, if miner's status is "Mining" but "interface offline" for 60 sec, then we can chose an action.
Is the rule "Offline Detection" enabled in the Options dialog, Rules section? In most cases, that one should figure out these scenarios. What kind of mining software is it that ends up with this problem?

Yes, as you can see in this picture, here's my settings for offline detection :

https://img4.hostingpics.net/pics/557959OfflineOK.jpg


Here's a fresh example of my problem, this time it's ccminer.exe that has crashed :

https://img4.hostingpics.net/pics/624545Problem.jpg

As you can see, my Rig is in "Mining" status, but below, it shows "Interface offline". It would be great to be able to detect this state and make rig reboot for example.
Thanks - now I see the scenario.

It will work better if you configure Windows to not show those crash dialogs and simply terminate the process right away. They are preventing the process from exiting and it will still be considered running by both Windows and Awesome Miner.
Please see this link for instructions: https://superuser.com/a/715645
After that modification, Awesome Miner should detect it as a crash and simply restart the mining process.
member
Activity: 158
Merit: 10
Awesome ant miner... I do have one but i need to upgrade my unit.. Smiley
newbie
Activity: 92
Merit: 0
Hello Patrike,
I encounter sometimes problems with software stuck or crashed and i don't find a way to handle this with rules...
Regarding Awesome Miner, my ring has status "Mining" but below there is "Interface offline".
A simple restart miner can solve the problem, but it seems there's no way for now to handle those cases with rules. Could you add this "Interface offline" option to rules with the possibility to configure a timer. For example, if miner's status is "Mining" but "interface offline" for 60 sec, then we can chose an action.
Is the rule "Offline Detection" enabled in the Options dialog, Rules section? In most cases, that one should figure out these scenarios. What kind of mining software is it that ends up with this problem?

Yes, as you can see in this picture, here's my settings for offline detection :

https://img4.hostingpics.net/pics/557959OfflineOK.jpg


Here's a fresh example of my problem, this time it's ccminer.exe that has crashed :

https://img4.hostingpics.net/pics/624545Problem.jpg

As you can see, my Rig is in "Mining" status, but below, it shows "Interface offline". It would be great to be able to detect this state and make rig reboot for example.
legendary
Activity: 3346
Merit: 1094
Hello,

I'm currently using Awesome Miner and I think I'm have an issue with the mining pools I've setup being recognized within the application. I have 3 separate mining pool groups configured. The first one contains 3 pools, the second contains 1 pool and the third contains 1 pool.

When Awesome Miner is running it only shows that I have 3 Total pools and 3 Enabled. I would think since I've configured 5 separate pools that it should show 5 Total with 5 Enabled.

ATM Awesome Miner will only switch between ETH and ETC (dual mining SIA) which are part of the same Pool Group. Even if I add the other two pools to the pool group that is working it still only shows 3 total pools.

I have unchecked the Failover Only check box on the 2nd and 3rd Pool Groups as well as setup the priorities for each individual pool, but I don't know what else to try or what I might be doing wrong.

Any help would be greatly appreciated, thank you.
On a specific miner (or for the profit switcher) you can only specify one Pool or Pool Group. If the group you selected has 3 pools, you will not get more than that even if there are other groups defined in the system. What if you add more of the pools to the same group instead?
Jump to: