[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 527.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Iwtym on October 24, 2017, 06:10:03 PM

Quote from: Iwtym on October 24, 2017, 04:02:34 PM

Quote from: Iwtym on October 24, 2017, 08:47:00 AM

Hi, seems the profit switcher is lightly off , most of the time it is not routing my d3 and l3+ to the most profitable coin. I have the profit switcher set to 1 minute and statistics to two minutes. I added all my coins to the custom json field anyways.

For example, the switcher will omit to switch to dash when mining me. It also barely switches to mooncoin despite the high profitability.

I tried removing "failover only" and quota 0. 100% confirmed the pools do not switch. I let it run all day and it just sat there mining MUE. It switched the L3 from EMC2 to GMC once in the entire day.

Found the problem Patrike. The switcher does not switch above 3 pools. It stops switching when I add the 4th pool. I have an X11 group with 10+ pools. Can you look into that?

Hi,

In the latest development version (see above), you can see the latest profit calculations for External Miners as well. Previously this feature was only available for Managed Profit Miners. Are the calculations correct when looking at this dialog:
http://www.awesomeminer.com/help/profitswitching.aspx#viewcalc

patrike

legendary

Activity: 3346

Merit: 1094

Awesome Miner Development Version 4.0.8 (preview of 4.1)

- Pool configuration via built-in web interface
- Pool permissions configurable per user group
- Notification operations available for non administrators via the built-in web interface, only operating on the notifications for the specific user
- New trigger to detect low device count for a miner, to find out when a GPU is missing
- New trigger to detect low fan speed, to find failing GPU fans
- Show more devices temperatures in the Status column
- Show Bitcoin values with more decimals when needed
- Added pool setting to ignore worker name specified on miner
- Set worker name and wallet address per Managed Profit Miner when using custom pools with the profit switcher
- Filter Online Services based on selection of Profit Profile
- Correction for Coinwarz API with SHA-256
- Corrections to the profit switcher

Please remember to upgrade the Remote Agents as well.

The get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates

whoisthismanoO

full member

Activity: 173

Merit: 100

Quote from: patrike on October 23, 2017, 02:18:08 PM

If I would modify the Notification action configuration, to allow you to specify a custom "Target URL" and "HTTP Method" for Webhooks as part of the notification - I assume it would solve your scenario? So similar to how you can override the e-mail address in a notification you would be able to override some Webhook settings in a notification.

I think yes. It would be great! Thank you!

Iwtym

newbie

Activity: 35

Merit: 0

Quote from: Iwtym on October 24, 2017, 04:02:34 PM

Quote from: Iwtym on October 24, 2017, 08:47:00 AM

Hi, seems the profit switcher is lightly off , most of the time it is not routing my d3 and l3+ to the most profitable coin. I have the profit switcher set to 1 minute and statistics to two minutes. I added all my coins to the custom json field anyways.

For example, the switcher will omit to switch to dash when mining me. It also barely switches to mooncoin despite the high profitability.

I tried removing "failover only" and quota 0. 100% confirmed the pools do not switch. I let it run all day and it just sat there mining MUE. It switched the L3 from EMC2 to GMC once in the entire day.

Found the problem Patrike. The switcher does not switch above 3 pools. It stops switching when I add the 4th pool. I have an X11 group with 10+ pools. Can you look into that?

Iwtym

newbie

Activity: 35

Merit: 0

Quote from: Iwtym on October 24, 2017, 08:47:00 AM

Hi, seems the profit switcher is lightly off , most of the time it is not routing my d3 and l3+ to the most profitable coin. I have the profit switcher set to 1 minute and statistics to two minutes. I added all my coins to the custom json field anyways.

For example, the switcher will omit to switch to dash when mining me. It also barely switches to mooncoin despite the high profitability.

I tried removing "failover only" and quota 0. 100% confirmed the pools do not switch. I let it run all day and it just sat there mining MUE. It switched the L3 from EMC2 to GMC once in the entire day.

Chapster

member

Activity: 75

Merit: 10

Hello Patrike,

I have noticed some issues that I would like to report to you:

1.- Upon boot, when Awesome Miner is loaded, it fires up the miner without waiting for the statistics information to be updated. This always results in the miner launching an algo or coin which was the most profitable when the computer was turned off but not anymore. It would be better for the program to wait until the information is updated before launching the miner.

2.- Custom algorithms can't be disabled. If you disable them, they are automatically enabled next time you open the profit profile.

3.- I am unable to get Awesome Miner to include algorithm "hmq1725" from Zpool. I added it exactly the same way I added all the other ones but for some unknown reason, it refuses to accept this one (it is there, but it is never shown in the "Online Services" tab).

4.- Its it possible for you to add other autoexchange pools (besides MPH and Zpool) as "Online Services"?

Iwtym

newbie

Activity: 35

Merit: 0

Hi, seems the profit switcher is lightly off , most of the time it is not routing my d3 and l3+ to the most profitable coin. I have the profit switcher set to 1 minute and statistics to two minutes. I added all my coins to the custom json field anyways.

For example, the switcher will omit to switch to dash when mining me. It also barely switches to mooncoin despite the high profitability.

Kronny

member

Activity: 137

Merit: 10

Hi patrike,
i have another question, i'm trying to run benchmark but i have some problem, i had create a new profit switch profile

but when i click the benchmark button in the tools toolbar i can see only ccminer

ty
ciao

toptek

legendary

Activity: 1274

Merit: 1000

Hey Man can you add support for this Software miner :

dstm's ZCash Cuda miner

https://bitcointalksearch.org/topic/ann-dstms-zcash-equihash-nvidia-miner-v062-linux-windows-2021765

Miner

https://drive.google.com/file/d/0B5QcL4Z6nYEPWVl4bFVhbmhfQjg/edit

it seems there might be bug with EWBF Dev Fee on or OFF

https://forum.z.cash/t/ewbf-dev-fee-almost-doubled-1-9-to-3-6-average/22460

I am able to use dstm's ZCash Cuda miner with awesome miner with no stats .

I own three NV cards now my next one is gonna be a 1080 ...

STSMiner

full member

Activity: 270

Merit: 115

Quote from: patrike on October 23, 2017, 03:50:27 PM

Quote from: STSMiner on October 23, 2017, 03:38:13 PM

Quote from: patrike on October 23, 2017, 02:41:28 PM

Quote from: STSMiner on October 23, 2017, 07:24:01 AM

The stock / built in pools don't allow you to customize the commands for the miner, so the only way was to make custom pools and then put them in a pool group so that they get auto switched based the profit via the online services and can also be seen via the Online Services tab.

Can you give an example of what you want to customize? Per pool command line or per algorithm command line?

In the Options dialog, profit profile, you can configure each profile, and each mining software for it. If you want a specific command line for Claymore Ethereum you can configure it here.
If you want to configure how for example Ccminer launches a specific algorithm, you can go to Options dialog, Managed Software, edit Ccminer and specify custom command line per algorithm.

Sure .... this is the command line argument from the generate API report for the custom pool I made as an example.

-a m7m -o stratum+tcp://m7m.mine.zpool.ca:6033 -u -p c=BTC -t 6

The password part is where I wanted to add commands as shown above. I could not get Awesome Miner to except commands for the built in pools unless I made a custom pool for that algo and then added the -p c=BTC t 6 in the password box.

So m7m and the related zpool pool should be possible to add using the "Add algorithm" guide ( http://www.awesomeminer.com/help/addalgorithm.aspx ). Then you can also configure Ccminer in Managed Software as you see in step 3 in that guide, where you can add your "User defined command line argument" and specify any extra parameters you need after the algorithm name. So not only "m7m" as command line but "m7m -t 6" for example.

I tried that, I could not get it to work, hence the custom pools route that I took to solve my problem.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: STSMiner on October 23, 2017, 03:38:13 PM

Quote from: patrike on October 23, 2017, 02:41:28 PM

Quote from: STSMiner on October 23, 2017, 07:24:01 AM

The stock / built in pools don't allow you to customize the commands for the miner, so the only way was to make custom pools and then put them in a pool group so that they get auto switched based the profit via the online services and can also be seen via the Online Services tab.

Can you give an example of what you want to customize? Per pool command line or per algorithm command line?

In the Options dialog, profit profile, you can configure each profile, and each mining software for it. If you want a specific command line for Claymore Ethereum you can configure it here.
If you want to configure how for example Ccminer launches a specific algorithm, you can go to Options dialog, Managed Software, edit Ccminer and specify custom command line per algorithm.

Sure .... this is the command line argument from the generate API report for the custom pool I made as an example.

-a m7m -o stratum+tcp://m7m.mine.zpool.ca:6033 -u -p c=BTC -t 6

The password part is where I wanted to add commands as shown above. I could not get Awesome Miner to except commands for the built in pools unless I made a custom pool for that algo and then added the -p c=BTC t 6 in the password box.

So m7m and the related zpool pool should be possible to add using the "Add algorithm" guide ( http://www.awesomeminer.com/help/addalgorithm.aspx ). Then you can also configure Ccminer in Managed Software as you see in step 3 in that guide, where you can add your "User defined command line argument" and specify any extra parameters you need after the algorithm name. So not only "m7m" as command line but "m7m -t 6" for example.

STSMiner

full member

Activity: 270

Merit: 115

Quote from: patrike on October 23, 2017, 02:41:28 PM

Quote from: STSMiner on October 23, 2017, 07:24:01 AM

The stock / built in pools don't allow you to customize the commands for the miner, so the only way was to make custom pools and then put them in a pool group so that they get auto switched based the profit via the online services and can also be seen via the Online Services tab.

Can you give an example of what you want to customize? Per pool command line or per algorithm command line?

In the Options dialog, profit profile, you can configure each profile, and each mining software for it. If you want a specific command line for Claymore Ethereum you can configure it here.
If you want to configure how for example Ccminer launches a specific algorithm, you can go to Options dialog, Managed Software, edit Ccminer and specify custom command line per algorithm.

Sure .... this is the command line argument from the generate API report for the custom pool I made as an example.

-a m7m -o stratum+tcp://m7m.mine.zpool.ca:6033 -u -p c=BTC -t 6

The password part is where I wanted to add commands as shown above. I could not get Awesome Miner to except commands for the built in pool(s) unless I made a custom pool for that algo and then added the -p c=BTC t 6 in the password box.

Each pool has it's own commands to allow for these options that I want for the selected algo in the password field.

-i 21
-t 3

or

c=BTC,d=6 -i 19

Here is another example ...

-a xevan -o stratum+tcp://xevan.mine.zpool.ca:3739 -u -p c=BTC,d=4

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: STSMiner on October 23, 2017, 07:24:01 AM

The stock / built in pools don't allow you to customize the commands for the miner, so the only way was to make custom pools and then put them in a pool group so that they get auto switched based the profit via the online services and can also be seen via the Online Services tab.

Can you give an example of what you want to customize? Per pool command line or per algorithm command line?

In the Options dialog, profit profile, you can configure each profile, and each mining software for it. If you want a specific command line for Claymore Ethereum you can configure it here.
If you want to configure how for example Ccminer launches a specific algorithm, you can go to Options dialog, Managed Software, edit Ccminer and specify custom command line per algorithm.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Gregor74 on October 23, 2017, 06:45:18 AM

Hi, Patrik.

I've bought an AM for monitoring my asics, plus I have several rigs which are working under NicehashMinerLegacy. I'm quite satisfied how NML works and want AM only shows me profit and temperatures of GPUs of those rigs. How can I do that?

It's fully possible to add External Miners that points to the API's of these mining software that the Nicehash miner launches. However, it will not work very well because the Nicehash miner can change the mining software running at any point, and there is no way for Awesome Miner to automatically follow those changes. At some point it might be Claymore mining on port 3333, and next minute it's sgminer on port 4028 and so on.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: Kronny on October 23, 2017, 02:53:25 AM

Quote from: patrike on October 21, 2017, 03:09:25 AM

Quote from: Kronny on October 19, 2017, 02:58:33 PM

Hi all,
is there some way to shutdown pc?
can i set some variable in option->pools->worker name? in a normal script i write %COMPUTERNAME% and my miner start with a computer name.
ty

2) Awesome Miner will simply pass this variable name to your mining software. So if the mining software supports it, it should work when launching it from Awesome Miner as well

Hi Patrike,

Let me explain the feature I am looking for in a more detailed way.

When I configure the pool connection through the GUI I am asked to set the Worker Name.

I would like to provide it using an environment variable that is set on the rig.
As an example, I would like to set it to %COMPUTERNAME%. So that on the pool I can check the single workers and I do not have to set them all manually in the GUI.
ty

There is a similar feature today where you can use the IP address. See "External Miners - Use worker name based on IP address":
http://www.awesomeminer.com/help/workername.aspx
It should work for pool worker name as well. I will probably be able to add something similar based on computer name as well.

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: STSMiner on October 22, 2017, 10:53:17 PM

Quote from: puwaha on October 22, 2017, 09:32:26 PM

Quote from: Iwtym on October 22, 2017, 06:30:25 PM

This worked. I correct what I said earlier - once you get the hang of this program it is easier.

I have some software suggestions that would push profitability to surpass NHML by far.

1. THE ABILITY TO CREATE A PROFILE WITH DIFFERENT SOFTWARES!!!! (ie. EWBF for equihash, excavator for x11, etc, etc) My initial suggestion of benchmarking all algos on all software would solve this. The AwesomeMiner Program would automatically keep the highest hashrate of all mining software for that algo.

You might be able to do this already with Profit Profiles. In there, you select the software you want to be active, which algos they do, etc. You apply the Profit Profile to a Profit Miner. You'd then create a pool group with all the pools/coins you want to mine against, and then set it all in motion on the Profit Miner.

I have tried this, I can not get it to work to mine Bitcore using the ccminer-sp-bitcore 2 miner.

Would be great if there was a way to modify the pre-build pools for Zpool and add new pre-defined pools somehow.

You probably found this already based on your last answer, but anyway - You can modify Zpool and add more of these in Options dialog, Online services section. Here is a guide how to add a new algorithm and the corresponding zpool pool for that new algorithm:
http://www.awesomeminer.com/help/addalgorithm.aspx

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: STSMiner on October 22, 2017, 11:36:59 AM

Patrike,

Can you add this pool to the next update to Awesome Miner >> http://pool.hashrefinery.com/

It's the same layout as Zpool.

Thanks for the feedback - I have this one on the todo list. I do get many requests for pool and features, but I appreciate all feedback because it helps me prioritize and implement the most popular features first.

soothaa

hero member

Activity: 1151

Merit: 528

Quote from: soothaa on October 22, 2017, 07:09:34 AM

I am up to 5 instances locally now of XMRig running, any words on the XMRig API support? It'll force me to upgrade my version Tongue

Take my money patrike!

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: soothaa on October 22, 2017, 07:09:34 AM

I am up to 5 instances locally now of XMRig running, any words on the XMRig API support? It'll force me to upgrade my version Tongue

Hi,
I've been getting a few requests about this one. My understanding is that it's available in different versions, one for CPU one for nVidia and so on. Any specific of these you had in mind?

patrike

legendary

Activity: 3346

Merit: 1094

Quote from: whoisthismanoO on October 22, 2017, 06:32:06 AM

Quote from: patrike on October 22, 2017, 03:26:44 AM

Quote from: whoisthismanoO on October 21, 2017, 03:18:09 PM

Patrike,
Please add the same option "Notify once" as in notifications (circled in red) for other types of notifications such as "Send SMS" and "Send webhook", because at the moment they can not be used. I'm bombarded with a huge number of notifications )))

Here we need the same:

In most cases this is solved by instead of using the email/SMS action, using a Notification action, and configure the notifications to also send email/sms messages (in Options dialog, Notification section). This is also what the blue information boxes inform about.

Can you describe the scenario where that kind of setup isn't good enough? I'm sure there are some, but I need to understand the complete scenario.

Using a Notification action I can't use webhook.

Here is one example:

I use this for notification to Telegram for each RIG separately because only GET metod working now and it requires different address lines.

If I would modify the Notification action configuration, to allow you to specify a custom "Target URL" and "HTTP Method" for Webhooks as part of the notification - I assume it would solve your scenario? So similar to how you can override the e-mail address in a notification you would be able to override some Webhook settings in a notification.

Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 527. (Read 703512 times)