i'm using it few weeks it's not stealing
claymore have devfee but its not related and it won't cut your speed by 30%
post you setting and specs instead of this shit
Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 581. (Read 703512 times)
July 09, 2017, 02:35:30 PM
July 09, 2017, 02:31:52 PM
Awesome miner is not miner, it is controlling and monitoring miners
you actually mine with claymore or etminer so check your settings
you actually mine with claymore or etminer so check your settings
When i started using AwesomeMiner my hashrate has dropped from 75 mh/s to 50 mh/s per rig.
Is AwesomeMiner taking 25 mh/s from me?
Is AwesomeMiner taking 25 mh/s from me?
switched off AwesomeMiner and hashrate get back to normal
Be aware! AwesomeMiner is stealing your hashrate without telling that!
Awesome Miner is NOT a mining software. It just includes several mining software and it is up to YOU to configure them properly. Awesome Miner does not get a single hash of your hashing power....
July 09, 2017, 02:27:16 PM
Awesome miner is not miner, it is controlling and monitoring miners
you actually mine with claymore or etminer so check your settings
you actually mine with claymore or etminer so check your settings
When i started using AwesomeMiner my hashrate has dropped from 75 mh/s to 50 mh/s per rig.
Is AwesomeMiner taking 25 mh/s from me?
Is AwesomeMiner taking 25 mh/s from me?
switched off AwesomeMiner and hashrate get back to normal
Be aware! AwesomeMiner is stealing your hashrate without telling that!
July 09, 2017, 01:40:42 PM
Awesome miner is not miner, it is controlling and monitoring miners
you actually mine with claymore or etminer so check your settings
you actually mine with claymore or etminer so check your settings
July 09, 2017, 01:23:39 PM
Yes i know but he takes this for all miners ......exampel 210 Mhs with 1250 Watts by 23 Cent/24 hours = 6,90€ then the prog takes the 6,90€ from all devices..... thats not right..... i think it must be possibel to say 1 Mhs / 5,4 Watt for Etherium and awesome miner take this and extrapolating this for all Rigs like....
100 mhs x 5,4 = 540 Watt x 0,23cent x 24 =2,98€
200 mhs x 5,4 = 1080 watt x 0,23 x 24 = 5,96.
.....
i want to upload some pics but thats dont work...
100 mhs x 5,4 = 540 Watt x 0,23cent x 24 =2,98€
200 mhs x 5,4 = 1080 watt x 0,23 x 24 = 5,96.
.....
i want to upload some pics but thats dont work...
July 09, 2017, 01:13:30 PM
When i started using AwesomeMiner my hashrate has dropped from 75 mh/s to 50 mh/s per rig.
Is AwesomeMiner taking 25 mh/s from me?
Is AwesomeMiner taking 25 mh/s from me?
July 09, 2017, 06:00:28 AM
Hello is there any Option to set the energy cost Watt/MHs when i add the costs by algo i can only Chose for one hashrate.
exampel like this 210Mhs/ 1150 Watt. .....the prob is that he calcualtes the the energycosts only for one this Rig right all other rigs with other hash rates have the same energycosts?
?
And is there any Option to save the gpu Setting for different miners and Coins? with afterburner?
i can Change the Settings but i didnt can save this in awesome miner ?
sorry for my bad english. i hope some one understand my Probs ;-)
yesexampel like this 210Mhs/ 1150 Watt. .....the prob is that he calcualtes the the energycosts only for one this Rig right all other rigs with other hash rates have the same energycosts?
?And is there any Option to save the gpu Setting for different miners and Coins? with afterburner?
i can Change the Settings but i didnt can save this in awesome miner ?
sorry for my bad english. i hope some one understand my Probs ;-)
set watt: options>algorithm
set cost: options>profit switching
turn on display: options>general
July 09, 2017, 04:50:48 AM
Hello is there any Option to set the energy cost Watt/MHs when i add the costs by algo i can only Chose for one hashrate.
exampel like this 210Mhs/ 1150 Watt. .....the prob is that he calcualtes the the energycosts only for one this Rig right all other rigs with other hash rates have the same energycosts??
And is there any Option to save the gpu Setting for different miners and Coins? with afterburner?
i can Change the Settings but i didnt can save this in awesome miner ?
sorry for my bad english. i hope some one understand my Probs ;-)
exampel like this 210Mhs/ 1150 Watt. .....the prob is that he calcualtes the the energycosts only for one this Rig right all other rigs with other hash rates have the same energycosts?
?And is there any Option to save the gpu Setting for different miners and Coins? with afterburner?
i can Change the Settings but i didnt can save this in awesome miner ?
sorry for my bad english. i hope some one understand my Probs ;-)
July 08, 2017, 10:46:57 PM
Excellent app makes monitoring my 4 miners extremely easy but just a couple of suggestions i'm sure others would like these as well.
Nvidia optimised miners
ccminer 2.0- https://bitcointalksearch.org/topic/ann-ccminer-23-opensource-gpl-tpruvot-770064 I use it to solo mine lbry but it is great for multiple coins.
ethminer 0.11.0- https://github.com/ethereum-mining/ethminer/releases solo Ethereum mining.
Thanks for all the great work keep it up.
Nvidia optimised miners
ccminer 2.0- https://bitcointalksearch.org/topic/ann-ccminer-23-opensource-gpl-tpruvot-770064 I use it to solo mine lbry but it is great for multiple coins.
ethminer 0.11.0- https://github.com/ethereum-mining/ethminer/releases solo Ethereum mining.
Thanks for all the great work keep it up.
July 08, 2017, 02:39:36 PM
How do I add allpools 1 and allcoins 1 on Claymore? I'm using custom options on device profile but it's failing now on mining pool hub because of it.
And it's weird, because it is giving the same message for my other nvidia rig, that I didn't add any custom profile for that.
right click miner>proporties>command lineAnd it's weird, because it is giving the same message for my other nvidia rig, that I didn't add any custom profile for that.
add -allpools 1 -allcoins 1
July 08, 2017, 01:58:20 PM
How do I add allpools 1 and allcoins 1 on Claymore? I'm using custom options on device profile but it's failing now on mining pool hub because of it.
And it's weird, because it is giving the same message for my other nvidia rig, that I didn't add any custom profile for that.
And it's weird, because it is giving the same message for my other nvidia rig, that I didn't add any custom profile for that.
July 08, 2017, 12:35:18 PM
Hello Patrike,
As the others have commented, there is something really weird going on with the Profit Switching.
I have several pools added to the pool list, they are all enabled.
For some reason, the program is constantly switching to a coin which has much lesser value than the top open.
And I'm not talking about a few cents less, sometimes the coin it chooses is half the profit of the top one.
Other times it just gets stuck with a coin, like if it has a mind of its own and it decided that is going to be that coin and only that one.
Doesn't matter how many times you restart the miner and update the coin interface, it will keep going at it.
Even if you completely close the program and open it again, it will go back to that coin.
When that happens, I open the log file and look at the "Profitability information". Even in the log file it clearly says that the other coin is more profitable, yet the program continues choosing its "preferred" coin.
I know that you are busy and all but giving that this is one of the most prominent features of your program, I think it should receive priority.
Hi,As the others have commented, there is something really weird going on with the Profit Switching.
I have several pools added to the pool list, they are all enabled.
For some reason, the program is constantly switching to a coin which has much lesser value than the top open.
And I'm not talking about a few cents less, sometimes the coin it chooses is half the profit of the top one.
Other times it just gets stuck with a coin, like if it has a mind of its own and it decided that is going to be that coin and only that one.
Doesn't matter how many times you restart the miner and update the coin interface, it will keep going at it.
Even if you completely close the program and open it again, it will go back to that coin.
When that happens, I open the log file and look at the "Profitability information". Even in the log file it clearly says that the other coin is more profitable, yet the program continues choosing its "preferred" coin.
I know that you are busy and all but giving that this is one of the most prominent features of your program, I think it should receive priority.
I will add a feature that better shows the calculated profitability and decisions made by the profit switcher. Today this information is available if you open the log file, but that's not very user friendly.
Keep in mind that the profit profiles are based on typical hashrates for AMD and nVidia cards. If your setup performs better/worse on specific algorithms, you need to manually adjust the hashrates for this (or right click and save the hashrate), otherwise the profit switcher will not be fine tuned for your setup and could make decisions that are not perfect.
Algorithm benchmarking is also a requested feature that is on the list of features to add in the future.
Hello Patrike,
Thanks for your reply.
In my original post I think I already covered the solution you are suggesting:
When that happens, I open the log file and look at the "Profitability information". Even in the log file it clearly says that the other coin is more profitable, yet the program continues choosing its "preferred" coin.
July 08, 2017, 11:16:20 AM
few posts ago you said: "Awesome Miner till not communicate with MSI Remote Server until you open up the GPU clocking dialog."
"GPU clocking dialog" you meant GPU tab on bottom or the "GPU Settings" option which not available in free version?
maybe this is why it showing P-States instead actual reading
EDIT:
found minor bug: when miner window minimized on mining rig, it is not shows in console tab in Awesome Miner
"GPU clocking dialog" you meant GPU tab on bottom or the "GPU Settings" option which not available in free version?
maybe this is why it showing P-States instead actual reading
EDIT:
found minor bug: when miner window minimized on mining rig, it is not shows in console tab in Awesome Miner
July 08, 2017, 09:31:15 AM
Is it showing as 1.20V both on GPU tab and the System tab in Awesome Miner?
yes both GPU and System tab showing same data
EDIT:
after checking other programs, speedfan and gpu-z also both show incorrect vddc, only msi afterburner show correct
seems some programs including Awesome Miner showing GPU P-States data instead of actual reading
EDIT2:
when accessing manually afterburner server at: http://10.0.0.10:82/mahm it shows correct voltages
so i guess its not connecting to msi server properly
July 08, 2017, 09:22:17 AM
Got everything going but have one problem GPU voltage shown incorrectly its always 1.20V but my gpu's on 1050mv
-using free version to monitor and miner agent software (not service) on mining rigs
-msi afterburner and msi server both running on rigs
-voltage control and monitoring unlocked in msi afterburner
-win10pro64 on all machines, gpu's 280x
Is it showing as 1.20V both on GPU tab and the System tab in Awesome Miner? -using free version to monitor and miner agent software (not service) on mining rigs
-msi afterburner and msi server both running on rigs
-voltage control and monitoring unlocked in msi afterburner
-win10pro64 on all machines, gpu's 280x
July 08, 2017, 08:49:41 AM
Got everything going but have one problem GPU voltage shown incorrectly its always 1.20V but my gpu's on 1050mv
-using free version to monitor and miner agent software (not service) on mining rigs
-msi afterburner and msi server both running on rigs
-voltage control and monitoring unlocked in msi afterburner
-win10pro64 on all machines, gpu's 280x
-using free version to monitor and miner agent software (not service) on mining rigs
-msi afterburner and msi server both running on rigs
-voltage control and monitoring unlocked in msi afterburner
-win10pro64 on all machines, gpu's 280x
July 08, 2017, 07:32:44 AM
I have a major issue with awesome Miner Currently.
I have 9 Rigs. I bought the 10 Rig Package.
The problem is I have 3 Nvidia rigs which switch between Equihash and CCminer.
Please PM me with a solution
Hi,I have 9 Rigs. I bought the 10 Rig Package.
The problem is I have 3 Nvidia rigs which switch between Equihash and CCminer.
Please PM me with a solution
I will share the answer here as well. I recommend you to use the concept of Managed Template to reduce the number of Managed Miners required for this scenario. You can have one template for Equihash and another for ccminer.
http://www.awesomeminer.com/help/managedtemplate.aspx
July 08, 2017, 07:30:24 AM
Hello Patrike,
As the others have commented, there is something really weird going on with the Profit Switching.
I have several pools added to the pool list, they are all enabled.
For some reason, the program is constantly switching to a coin which has much lesser value than the top open.
And I'm not talking about a few cents less, sometimes the coin it chooses is half the profit of the top one.
Other times it just gets stuck with a coin, like if it has a mind of its own and it decided that is going to be that coin and only that one.
Doesn't matter how many times you restart the miner and update the coin interface, it will keep going at it.
Even if you completely close the program and open it again, it will go back to that coin.
When that happens, I open the log file and look at the "Profitability information". Even in the log file it clearly says that the other coin is more profitable, yet the program continues choosing its "preferred" coin.
I know that you are busy and all but giving that this is one of the most prominent features of your program, I think it should receive priority.
Hi,As the others have commented, there is something really weird going on with the Profit Switching.
I have several pools added to the pool list, they are all enabled.
For some reason, the program is constantly switching to a coin which has much lesser value than the top open.
And I'm not talking about a few cents less, sometimes the coin it chooses is half the profit of the top one.
Other times it just gets stuck with a coin, like if it has a mind of its own and it decided that is going to be that coin and only that one.
Doesn't matter how many times you restart the miner and update the coin interface, it will keep going at it.
Even if you completely close the program and open it again, it will go back to that coin.
When that happens, I open the log file and look at the "Profitability information". Even in the log file it clearly says that the other coin is more profitable, yet the program continues choosing its "preferred" coin.
I know that you are busy and all but giving that this is one of the most prominent features of your program, I think it should receive priority.
I will add a feature that better shows the calculated profitability and decisions made by the profit switcher. Today this information is available if you open the log file, but that's not very user friendly.
Keep in mind that the profit profiles are based on typical hashrates for AMD and nVidia cards. If your setup performs better/worse on specific algorithms, you need to manually adjust the hashrates for this (or right click and save the hashrate), otherwise the profit switcher will not be fine tuned for your setup and could make decisions that are not perfect.
Algorithm benchmarking is also a requested feature that is on the list of features to add in the future.
July 08, 2017, 07:26:44 AM
Hi. Is it possible to set different wallets for different profit profiles in profit switching mode?
That's not supported. However, in the next release it will be supported to specify different wallets for each miner. July 08, 2017, 07:25:31 AM
Is it possible to modify the web interface that comes with AwesomeMiner? Would be nice to customize it myself.
The source code for the web site is bundle and minimized so it's not realtistic to modify it. The Awesome Miner API allows you to develop your own web interface, but that can be a significant task. Jump to: