Topic: [Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners - page 89. (Read 703583 times)

On the Balances tab under wallet balance I put in all my bitcoin addresses. I noticed that addresses that start with BC1 won't show a balance. I looked in settings and it is using the default https://blockchain.info/en/balance for looking up the balance. When I go to blockchain.info in a web browser I can see the balance of bitcoin addresses starting with BC1 just fine.

Hi patrike,

i have a Problem with GPU Clock Profiles. I save the GPU settings from a RIG, and sometimes if i want to change some settings from 1 GPU Profile i get an error. But this error makes no sense to me.




And other Problems:

NBminer 31.1 recognize AMD AND NVIDIA CARDS, so if i want to set some devices for the miner, the order is wrong. Awesomeminer only show nvidia cards, and will begin with device 0, but the first card is a AMD card. So the order of the devices are not correct.

Wildrig Multiminer the same problem. It will recognize AMD AND NVIDIA CARDS, but i only can choose AMD cards in Awesomeminer. So the order is wrong too.

Awesome Miner version 7.8.4

 ASIC mining
  - Antminer Z15 supported with correct hashrate display
 GPU mining
  - Bulk edit of number of expected GPUs, for use with Device Count trigger to detecting missing GPUs
 Rules
  - The Device Count trigger made more flexible to support trigger conditions not only on missing devices but also when the number of devices are on the expected level
 Mining software
  - Add mining software: XMR-Stak-RX
  - Gminer 2.15
  - Lolminer 1.04
  - XmRig 6.2.3

Thanks for sharing. From what I can see, the changes in Awesome Miner v7.8.4 will correct the hashrate display.

Thanks for the fast reply!
Here is the report:
https://pastebin.com/ZLa7EvPQ

run mining process with administrator privilges is not required for -rxboost. only for the first start to install the driver, but after that, administrator privilges are not required!!!!

For me it is important, because the console in AM will show nothing with administrator privilges or it will show the console in a very ugly way 

Some Antminers reports the hashrate in another unit than what they say it is. I've just implemented an adjustment for Antminer Z15 to make it show up correct. The next release will include this correction.

If possible, could you please send me the API report for this miner? Via the toolbar: Tools -> API Report. This makes it possible for me to confirm the adjustments. Thanks!

Please right click on your miner and select Properties.
1) On the Environment tab, enable "Run mining process with administrator privileges". This is required for -rxboost and similar parameters
2) On the Command line tab, please enter the "Parameters to mining software" you want, like -rxboost.

I've implemented support for XMR-Stak-RX. This will be included in the next release.

XmRig and XMR-Stak-RX doesn't respond to keystrokes sent by external applications for some reason.

its possibel to add on awesome miner a string like in claymore miner like -rxboost and more like this

Hello,

I just received the new Antminer Z15 and I set it up in AwesomeMiner, but it seems there is a problem with the statistics... The hash should be 430 kH and not TH.

https://i.ibb.co/Lz0Wrvf/Capture.png

Any idea how to fix the hashrate?

Not idea on how much demand is on XMR Stak... I just started using it because it shows share value.... The latest XMRig (whenever released) will have share value and I will move back to XMRig... I was just curious..

Again, samething for HellMiner - I do mine that off and on... I haven't been able to add that miner (haven't put too much effort into it yet) but the miner is set up different than most....

As far as the console tab issue for XMRig - its on Windows. The "Send keystrokes" option doesn't work either.

Hello and thanks for the feedback.

I do still have a note about improving this from a profit switching perspective. There are some design changes requires to support this in a good way which is why the feature hasn't been added yet. I do intent do improve the mining history at some point to give you better insight in these cases.

Thanks for the feedback. I think many users were running XmRig instead. However, if there is a demand for more software support like XmrStak I will of course take a look and implement. Please allow me to get back with an update on this in a week.

Is the console tab issue related to mining on Linux?

Hello @patrike, I haven't spoken here for a long time, but I use your software every day. I am always attentive to all updates.

I'm going to remind you of an old request from me. It is about the statistics of the miner. They are getting better, but I lack an important detail.

Now we can see how much time in% or minutes a certain pool or AL-GO has been mining, but for me it is very important to know how many times I have done that. I give you an example that recently happened to me with ETH in nicechash.

He mined around 20-25% of the nicehash ETH time, but the problem was that when he started mining, he entered because he had an abnormally high profit, then it was 4 or 7 minutes and he mined something else. And this happened many times. And every time it changes we lose minutes of mining.

Example in a 24 hour statistics in minutes

180 minutes (3 hours) in 30 changes = 180/30 = 6 minutes of average mining time. This is rubbish.

than
180 minutes in 5 changes 180/5 = 36 minutes, this is infinitely better.

So far the only way I have to know this is simply by looking at the Awesome miner screen.

That is why I indicate that it is a very easy addition, to count how many times mine in that protocol and also make the count of how much is the average time in that protocol. With this we can know much better if that protocol is being manipulated to attract bots.

I hope it is well understood and can be done.

Hello...

Why is certain software not included within Awesome Miner with the algo is included? Like XMRSTak for RandomX? Or, HellMiner for Verus? (Yes, I know I can go add them... but...............)

EDIT- Add-on.

Not sure where I started seeing thing... But the "console" tab, where I can have a live look on my rigs, is very spotty with XMRig. It will speed through to get "caught up" but then you cannot hit "refresh" to get an update.

Awesome Miner version 7.8.3

 GPU mining
  - Added additional mining algorithms
 Features
  - The Information column can be configured to display the Antminer ASIC voltage
 Changes
  - The Mining History will ignore unrealistic temperature readings reported by mining software or ASIC miners
 Mining software
  - GMiner 2.13
  - Lolminer 1.03
  - NoncerPro nVidia Miner 3.3.1

It worked fine on RTX2070 as well using nVidia driver 445.87. Have you tried to update the drivers? The NVML error message you get from the mining software sounds like some driver file incompatibility.

I send you email u can find easily same as my name here an email from, btw sorry I made a mistake that miner did not report earning is TRM for AMD, and problem from noncenpro is I cant use rigname, if I use rigname miner won't start, I send you API report from TRM software... thanks

Thanks!  Missed that space.

Unfortunately, I'm now getting this error:


And AM just keeps restarting the miner.  It has been mining MPT (Zcoin) for the last 6 months with no issues.  

EDIT:  Runs fine on my 1080Ti rigs, just not the 1070Ti ones.  Go figure...