anyone currently mining digibyte? which algorithm and whats your return per day?
about 800 digibyte a day using Qubit
For DGB, you could try myr-gr too: 150W only.
Topic: Baikal Giant X10 - page 72. (Read 132905 times)
about 800 digibyte a day using Qubit
For DGB, you could try myr-gr too: 150W only.
Okay so i am finally back home. The green leds on the hashboards keep on blinking while the other colors are constant. Any idea what it means?
Isn't there just 1 green LED which is for the ethernet port?
nah there are green LEDs on the hashboards too.
so I let it running. the Ethernet port is working fine. seems to be connected and responding.
each hashboard has two red LEDs and one blue on(occasionally a green on pops up)
several restarts did nothing. not showing up on my ip scanner.
got the pizero out. then I realised i don't have a microSD card reader. fun
so do I just flash the firmware that I found on baikal's website(pizero_GX10_1712)? what the hell do I even use to flash or is it just a copy paste and overwrite on what is on the X10?
check this pdf from baikal for instruction how to update firmware http://www.baikalminer.com/down/GiantX10.pdf
anyone currently mining digibyte? which algorithm and whats your return per day?
about 800 digibyte a day using Qubit
where are you mining?
MPH
anyone currently mining digibyte? which algorithm and whats your return per day?
about 800 digibyte a day using Qubit
where are you mining?
anyone currently mining digibyte? which algorithm and whats your return per day?
about 800 digibyte a day using Qubit
Okay so i am finally back home. The green leds on the hashboards keep on blinking while the other colors are constant. Any idea what it means?
Isn't there just 1 green LED which is for the ethernet port?
nah there are green LEDs on the hashboards too.
so I let it running. the Ethernet port is working fine. seems to be connected and responding.
each hashboard has two red LEDs and one blue on(occasionally a green on pops up)
several restarts did nothing. not showing up on my ip scanner.
got the pizero out. then I realised i don't have a microSD card reader. fun
so do I just flash the firmware that I found on baikal's website(pizero_GX10_1712)? what the hell do I even use to flash or is it just a copy paste and overwrite on what is on the X10?
So one algorithm at a time. To understand power usage - I'm looking at the Giant B and the highest power usage is Blake256R14 @ 410W. So since it would only mine that one algorithm at a time I'd only need just over 410 watts - so a 800W PSU would suffice as Gongolo said? I was thinking of getting one of the HP server power supplies with a breakout board.
Gongolo is right Okay so i am finally back home. The green leds on the hashboards keep on blinking while the other colors are constant. Any idea what it means?
Isn't there just 1 green LED which is for the ethernet port?
nah there are green LEDs on the hashboards too.
so I let it running. the Ethernet port is working fine. seems to be connected and responding.
each hashboard has two red LEDs and one blue on(occasionally a green on pops up)
several restarts did nothing. not showing up on my ip scanner.
I want to buy minimum 30 maximum 100 piece giant b miner.
but i cant find this device.
i want to going to hong kong or china..
If you are a serious seller, please tell me a good price.
Thanks, Best Regards.
but i cant find this device.
i want to going to hong kong or china..
If you are a serious seller, please tell me a good price.
Thanks, Best Regards.
So one algorithm at a time. To understand power usage - I'm looking at the Giant B and the highest power usage is Blake256R14 @ 410W. So since it would only mine that one algorithm at a time I'd only need just over 410 watts - so a 800W PSU would suffice as Gongolo said? I was thinking of getting one of the HP server power supplies with a breakout board.
For those who have a Giant B - or probably those with a Giant X10 since I'm guessing they must be similar - What power supply are you using? 1200v enough? Would I be able to mine on all algos at the same time or is there a limit with what can be mined at any given time?
If you are going to use X11 algo, you will nee 630W, so 800W+ PSU will be enough.
If you won't use X11 algo, you will need max 390W.
1200W is certainly enough.
For those who have a Giant B - or probably those with a Giant X10 since I'm guessing they must be similar - What power supply are you using? 1200v enough? Would I be able to mine on all algos at the same time or is there a limit with what can be mined at any given time?
1. Use APW3++2. One at a time, but can set multiple routing in case if one algo down it can switch to other one.
For those who have a Giant B - or probably those with a Giant X10 since I'm guessing they must be similar - What power supply are you using? 1200v enough? Would I be able to mine on all algos at the same time or is there a limit with what can be mined at any given time?
looking for an X10. Anyone an idea from where I could get one?
someone has already taken the miner apart to get the SD card.
Do I just have to open the four screws in the back, right?
Do I just have to open the four screws in the back, right?
Yes simple, dont be afraid. Just do it as its very easy
someone has already taken the miner apart to get the SD card.
Do I just have to open the four screws in the back, right?
Do I just have to open the four screws in the back, right?
Okay so i am finally back home. The green leds on the hashboards keep on blinking while the other colors are constant. Any idea what it means?
Isn't there just 1 green LED which is for the ethernet port?
Okay so i am finally back home. The green leds on the hashboards keep on blinking while the other colors are constant. Any idea what it means?
I need help from anyone got past customs with asicminermarket.com , My unit waits at customs and I need the company info or a photo of older invoices by them delivered to customs to generate a real invoice for the miner. Customs did not accept the price and ask for real invoice, i told them it costs 1999$ and they still want an invoice.... i still didn't got a reply from simon and I need it so urgently..
Very sorry that I did not reply in time. Please write me an e-mail immediately, I am willing to assist you, it is 2 am in China tomorrow, I will help you work together to solve, asicminermarket team.I sent you a pm here , i sent the customs an invoice from the whois info of asicminermarket, if they dont accept i will need a simple pdf that writes that i sent you 1999$ in btc. Thanks a lot!
simon i cant send you a pm can you please send me your email ? I have sent to sales but noone responded....
how to install a new Frimware, Baikal Gaint x10.
Do I have to disassemble the miner to get the SD card?
or is there another way to do it?
Do I have to disassemble the miner to get the SD card?
or is there another way to do it?
Jump to: