Pages:
Author

Topic: BAMT version 0.5 - Easy USB based mining Linux with farm wide management tools - page 18. (Read 324176 times)

hero member
Activity: 910
Merit: 1002
when starting up what does this mean

checkfs.sh failed with warning colored in yellow
Same problem, and bamt fail after 2-3-4 hours. Any ideas?
hero member
Activity: 502
Merit: 500
is there a soft release date for version .6 yet i think im holding off on new usb keys and asking to see about rates as fair as you programing my fram to read on one page until the release.
hero member
Activity: 616
Merit: 506
Out of curiosity - will BAMT support 5 or 6  HD7970 cards?

it will support whatever the AMD driver supports.  Usually that means 8 gpus total.


Any idea what this means?
Code:
(process:308): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
startpar: service(s) returned failure: gdm ... failed!

aticonfig --list-adapters showed 0 supported adapters

it means its time for you to write the image to your key again, and maybe just get a new usb key if things like that keep happening.
member
Activity: 65
Merit: 10
Out of curiosity - will BAMT support 5 or 6  HD7970 cards?

it will support whatever the AMD driver supports.  Usually that means 8 gpus total.


Any idea what this means?
Code:
(process:308): GLib-WARNING **: getpwuid_r(): failed due to unknown user id (0)
startpar: service(s) returned failure: gdm ... failed!

aticonfig --list-adapters showed 0 supported adapters
hero member
Activity: 616
Merit: 506
Out of curiosity - will BAMT support 5 or 6  HD7970 cards?

it will support whatever the AMD driver supports.  Usually that means 8 gpus total.
hero member
Activity: 497
Merit: 500
Had 5 5xxx series on one rig. Waiting for 0.6 to run the 5 7970's

Yes you can undervolt..

Lod: Release Date?
member
Activity: 65
Merit: 10
Yes

Awesome - are you running a 5 or 6 card setup?

Is it possible to undervolt in BAMT?
hero member
Activity: 497
Merit: 500
member
Activity: 65
Merit: 10
Out of curiosity - will BAMT support 5 or 6  HD7970 cards?
hero member
Activity: 956
Merit: 1001
Is there any way to figure about the CPU temperature and speed?
My CPU fan has been running unusually high and the thermal paste was applied horribly.
I cleaned the fan from a ton of dust already.

reapply the cpu thermal paste?
member
Activity: 80
Merit: 10
I'm OG
Is there any way to figure about the CPU temperature and speed?
My CPU fan has been running unusually high and the thermal paste was applied horribly.
I cleaned the fan from a ton of dust already.
hero member
Activity: 626
Merit: 500
Mining since May 2011.
legendary
Activity: 1190
Merit: 1000
www.bitcointrading.com
Thanks lodcrappo, that is good to know.
Have another question: how big the new BAMT will be?

Why I am asking this, the old BAMT that was meant for at least a 2GB stick was in fact too big for some 2gb sticks, which were in fact 1.8GB.
I always had to shrink the image prior to load it on my stick. So maybe you could make the image a biiiit smaller?
Something like 1.7GB or eventually 3.7GB whatever is the case.

bamt 0.6 has much smaller requirements and dynamically resizes the persistence partition to the size of the key.  It may work on 512MB key, it will definitely work on 1GB keys.


AWESOME news!  Now if we could PXE boot...
hero member
Activity: 561
Merit: 500
I am curious about those high temperatures, what physical setup do you have?
You have the cards in a closed/open case or in an open rig with cards wide apart using extenders..etc?

I have them in an open banana box made of wood. I use extenders so one card is directly on the board and the others are above with about 3 cm space between each. More place i do not have. Now over night they came down to 74 the highest temp. So i will have an eye on it.
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
6870's are engine -100. I set --auto-gpu --auto-fan --gpu-engine 950 --gpu-memdiff -100 -I 9 and forget about them for weeks, they clock down a bit during the day and go back up at night, and they never crash.
OK yep - silly me Smiley Wrong again Smiley I guess I should have said 69xx
Is it all 68xx are -100, or no one knows?
donator
Activity: 798
Merit: 500
6870's are engine -100. I set --auto-gpu --auto-fan --gpu-engine 950 --gpu-memdiff -100 -I 9 and forget about them for weeks, they clock down a bit during the day and go back up at night, and they never crash.
hero member
Activity: 700
Merit: 500
I am curious about those high temperatures, what physical setup do you have?
You have the cards in a closed/open case or in an open rig with cards wide apart using extenders..etc?
legendary
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4


Weird, this 125 difference is working for my 6xxx.
If temperatures are worrying you, yes go with the bios flash.

hmm no when i put anything lower than 840 it goes back to 1050

ok i will try it. thanks
The default BIOS setting in most 6xxx cards is a lower limit of -125 difference.
... I would have said ALL 6xxx cards except you seem to have one that isn't Smiley
So with cgminer you use --gpu-memdiff -125 on 6xxx
(of course you need a collection of other options too)
hero member
Activity: 561
Merit: 500


Weird, this 125 difference is working for my 6xxx.
If temperatures are worrying you, yes go with the bios flash.

hmm no when i put anything lower than 840 it goes back to 1050

ok i will try it. thanks
Pages:
Jump to: