BAMT version 0.5 - Easy USB based mining Linux with farm wide management tools - page 29.

BitMinerN8

hero member

Activity: 626

Merit: 500

Mining since May 2011.

Quote from: Infinity1 on July 19, 2012, 07:02:38 PM

Does anyone know why my hashing power suddenly drops to 5 every couple hours? My share count also resets.

Here's an image:

The official BAMT website is always down.

This is most likely a pool issue, not a BAMT issue. I see these too on occasion. Sometimes the exact time matches up over several rigs, that it why I suggest a pool issue.

Infinity1

member

Activity: 80

Merit: 10

I'm OG

Does anyone know why my hashing power suddenly drops to 5 every couple hours? My share count also resets.

Here's an image:

The official BAMT website is always down.

BitMinerN8

hero member

Activity: 626

Merit: 500

Mining since May 2011.

Quote from: Infinity1 on July 14, 2012, 01:34:42 AM

Quote from: BitMinerN8 on July 14, 2012, 01:31:34 AM

Quote from: Infinity1 on July 14, 2012, 01:27:43 AM

Quote from: BitMinerN8 on July 14, 2012, 01:12:41 AM

Quote from: Infinity1 on July 14, 2012, 01:06:12 AM

I can't access my box VIA website statistics or gpumon.

I also get "xauth: (argv):1: merge: unable to open file /home/user/.Xauthority" once I get into SSH.

Anyone have any solutions?

Have you run fixer and patched to current?

Yes I have, and now it won't overclock.

Have you checked this folder?
https://bitcointalksearch.org/topic/m.985548

I had this:
"mother disabled overclocking on this GPU due to a defunct phoenix process at Sat Jul 14 05:03:02 2012"

Although, I still am trying to figure out why HTTP and gpumon won't respond, I'll just hope it won't happen again.

Well since it's hard to diagnose your exact issue without knowing your configuration, I would suggest to start reading around mid way through this forum thread to current. There are lots of trouble shooting tips that might help.

Infinity1

member

Activity: 80

Merit: 10

I'm OG

Quote from: BitMinerN8 on July 14, 2012, 01:31:34 AM

Quote from: Infinity1 on July 14, 2012, 01:27:43 AM

Quote from: BitMinerN8 on July 14, 2012, 01:12:41 AM

Quote from: Infinity1 on July 14, 2012, 01:06:12 AM

I can't access my box VIA website statistics or gpumon.

I also get "xauth: (argv):1: merge: unable to open file /home/user/.Xauthority" once I get into SSH.

Anyone have any solutions?

Have you run fixer and patched to current?

Yes I have, and now it won't overclock.

Have you checked this folder?
https://bitcointalksearch.org/topic/m.985548

I had this:
"mother disabled overclocking on this GPU due to a defunct phoenix process at Sat Jul 14 05:03:02 2012"

Although, I still am trying to figure out why HTTP and gpumon won't respond, I'll just hope it won't happen again.

BitMinerN8

hero member

Activity: 626

Merit: 500

Mining since May 2011.

Quote from: Infinity1 on July 14, 2012, 01:27:43 AM

Quote from: BitMinerN8 on July 14, 2012, 01:12:41 AM

Quote from: Infinity1 on July 14, 2012, 01:06:12 AM

I can't access my box VIA website statistics or gpumon.

I also get "xauth: (argv):1: merge: unable to open file /home/user/.Xauthority" once I get into SSH.

Anyone have any solutions?

Have you run fixer and patched to current?

Yes I have, and now it won't overclock.

Have you checked this folder?
https://bitcointalksearch.org/topic/m.985548

Infinity1

member

Activity: 80

Merit: 10

I'm OG

Quote from: BitMinerN8 on July 14, 2012, 01:12:41 AM

Quote from: Infinity1 on July 14, 2012, 01:06:12 AM

I can't access my box VIA website statistics or gpumon.

I also get "xauth: (argv):1: merge: unable to open file /home/user/.Xauthority" once I get into SSH.

Anyone have any solutions?

Have you run fixer and patched to current?

Yes I have, and now it won't overclock.

BitMinerN8

hero member

Activity: 626

Merit: 500

Mining since May 2011.

Quote from: Infinity1 on July 14, 2012, 01:06:12 AM

I can't access my box VIA website statistics or gpumon.

I also get "xauth: (argv):1: merge: unable to open file /home/user/.Xauthority" once I get into SSH.

Anyone have any solutions?

Have you run fixer and patched to current?

Infinity1

member

Activity: 80

Merit: 10

I'm OG

I can't access my box VIA website statistics or gpumon.

I also get "xauth: (argv):1: merge: unable to open file /home/user/.Xauthority" once I get into SSH.

Anyone have any solutions?

mc_lovin

legendary

Activity: 1190

Merit: 1000

www.bitcointrading.com

So while we wait for the official 7970 edition of bamt, I have made a quick little guide as to how you can start mining with GCN with bamt!

Unofficial BitcoinTrading.com BAMT 7970 Guide

BitMinerN8

hero member

Activity: 626

Merit: 500

Mining since May 2011.

Quote from: bobers on July 10, 2012, 04:03:44 AM

Can you help? i didn't find what i need in FAQ

I know it might sound silly but when I was building BAMT rigs with 5+ GPU I would start with 1 GPU, get it stable, then add the next, make both stable, and so on. Sometimes you'll need to tweak settings as you go, especial if you are using PCIe extenders. Have you tired just 1 GPU?

bobers

member

Activity: 73

Merit: 10

Can you help? i didn't find what i need in FAQ

TheHarbinger

sr. member

Activity: 378

Merit: 250

Why is it so damn hot in here?

bobers

member

Activity: 73

Merit: 10

After reboot i can't load my miner, my GPUs not OC
restart miners or coldreboot doesn't help

Code:

 Display   GPUs   Pools   Control

 0 ERR [Errno 111] Connection refused                     0%   157/300   41.0c
                                                          Fan: 1928 rpm ( 70%)
 1 ERR [Errno 111] Connection refused                     0%   157/300   40.0c
                                                          Fan: 1861 rpm ( 70%)
 2 ERR [Errno 111] Connection refused                     0%   157/300   41.0c
                                                          Fan: 2011 rpm ( 70%)
 3 ERR [Errno 111] Connection refused                     0%   157/300   37.0c
                                                          Fan: 1970 rpm ( 70%)
 4 ERR [Errno 111] Connection refused                     0%   157/300   38.0c
                                                          Fan: 2002 rpm ( 70%)
 5 ERR [Errno 111] Connection refused                     0%   157/300   40.0c
                                                          Fan: 1854 rpm ( 70%)

 07:36:19: GPU : ERR [Errno 111] Connection refused
 07:36:19: GPU : ERR [Errno 111] Connection refused
 07:36:19: GPU : ERR [Errno 111] Connection refused
 07:36:19: GPU : ERR [Errno 111] Connection refused
 07:36:19: GPU : ERR [Errno 111] Connection refused

lodcrappo

hero member

Activity: 616

Merit: 506

Quote from: seriouscoin on June 30, 2012, 12:23:08 AM

no words on 7970?

I now have the 7970 that was purchased by donations, thanks to everyone who contributed and to Joshwa for selling me the GPU.

I will be working on a BAMT update in the next few days.

Transisto

donator

Activity: 1731

Merit: 1008

Read-only file system problem.

Code:

rm: cannot remove `/live/image/BAMT/CONTROL/ACTIVE/noOCGPU3': Read-only file system

Did a Scandisk under windows,

Code:

151k recovered in 9 file,   autocong cgsnoop phoenix2, and CHECK_NETWORK.SH , entry trunkated

Problem fixed.

seriouscoin

hero member

Activity: 658

Merit: 500

no words on 7970?

nolo200

member

Activity: 98

Merit: 10

Quote from: lodcrappo on June 28, 2012, 02:46:43 AM

Quote from: CoinDiner on June 27, 2012, 04:38:43 PM

Well I think I have enough experience with Debian to try and recomplie cgminer, However the fact that no other tool will work is a bummer.

looks like I will have to find another solution.

Kano has a guide to making your own bootable usb key with cgminer. I would look at that.

Donation made. Thanks for the software!

TID: bf008e248f5ca50be94e0f74a87b582768f017534768e110de187b433f66d04e

lodcrappo

hero member

Activity: 616

Merit: 506

Quote from: CoinDiner on June 27, 2012, 04:38:43 PM

Well I think I have enough experience with Debian to try and recomplie cgminer, However the fact that no other tool will work is a bummer.

looks like I will have to find another solution.

Kano has a guide to making your own bootable usb key with cgminer. I would look at that.

TheHarbinger

sr. member

Activity: 378

Merit: 250

Why is it so damn hot in here?

Quote from: CoinDiner on June 27, 2012, 04:38:43 PM

Well I think I have enough experience with Debian to try and recomplie cgminer, However the fact that no other tool will work is a bummer.

looks like I will have to find another solution.

Well, you can still use BAMT with cgminer, it's just BAMT's built in tools don't monitor FPGAs. You can still use one of the the cgminer monitoring tools for the stats output. Check the miner software forum for those tools.

CoinDiner

newbie

Activity: 28

Merit: 0

Well I think I have enough experience with Debian to try and recomplie cgminer, However the fact that no other tool will work is a bummer.

looks like I will have to find another solution.

Topic: BAMT version 0.5 - Easy USB based mining Linux with farm wide management tools - page 29. (Read 324169 times)