[BBR] Boolberry GPU Miner Discussion - AMD & Nvidia - OpenCL & CUDA - page 13.

mbk

member

Activity: 106

Merit: 10

OpenCL version uses extended config. Ordinary version overwrites it if you run it later and use the same directory. Use different directories if you need both versions. Look at command line options.

Quote from: vlad_kos on August 18, 2014, 02:47:28 PM

Quote from: mbk on August 18, 2014, 11:04:40 AM

The same directory as blockchain database. For default location run

Code:

cd %APPDATA%\boolb

Quote from: vlad_kos on August 18, 2014, 05:15:00 AM

where is miner_conf.json in boolberry-opencl-0.2.0.31d-windows-x64.zip

my video card r290

my miner_conf.json

Code:

{
  "current_extra_message_index": 0,
  "donation_decision": false,
  "donation_decision_made": false,
  "donation_descision": false
}

нeтy platform_index

vlad_kos

newbie

Activity: 46

Merit: 0

Quote from: mbk on August 18, 2014, 11:04:40 AM

The same directory as blockchain database. For default location run

Code:

cd %APPDATA%\boolb

Quote from: vlad_kos on August 18, 2014, 05:15:00 AM

where is miner_conf.json in boolberry-opencl-0.2.0.31d-windows-x64.zip

my video card r290

my miner_conf.json

Code:

{
  "current_extra_message_index": 0,
  "donation_decision": false,
  "donation_decision_made": false,
  "donation_descision": false
}

нeтy platform_index

mbk

member

Activity: 106

Merit: 10

The same directory as blockchain database. For default location run

Code:

cd %APPDATA%\boolb

Quote from: vlad_kos on August 18, 2014, 05:15:00 AM

where is miner_conf.json in boolberry-opencl-0.2.0.31d-windows-x64.zip

my video card r290

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: sussex on August 08, 2014, 04:36:32 PM

Quote from: sussex on August 07, 2014, 10:41:33 PM

Quote from: tygarbyte on August 07, 2014, 10:31:38 PM

4 card amd rig

boolbd.exe --start-mining=1K5BH.....rCLe9gxXF --mining-threads=4

boolbd.exe --start-mining=[address] --mining-threads=[n]

n - number of GPUs to use

Doesn't seem to be working though.

When I try 4 threads I get an error about CL_Name and platform index must be between 0 and some huge number.

Tried alter device index also, but still the same.

Only one gpu shown working in gpu-z

Do I need a certain version of driver maybe? I'm on 13.251 Catalyst 13.12

Ok, does this simply not work with multi-gpu rigs?

I've tried everything suggested plus a few ideas of my own and I just cannot get this to work with more than one card. I've also updated drivers which hasn't made the boolberry situation better, but has buggered up my other mining. Not impressed.

I see others here complaining of similar problems and they seem to be getting nowhere too.

Any clues, anyone?

My CUDA miner only works with Nvidia, but it will support as many GPUs as the driver will.

vlad_kos

newbie

Activity: 46

Merit: 0

btc-mike

hero member

Activity: 938

Merit: 1001

News Everybody!

I updated the first post of this thread to the current state. Let me know if any changes are required.

mike

mbk

member

Activity: 106

Merit: 10

vlad_kos

newbie

Activity: 46

Merit: 0

Quote from: mbk on August 15, 2014, 01:06:43 PM

It looks like miner doesn't work. You should look at miner initialization messages.

Quote from: vlad_kos on August 15, 2014, 07:37:45 AM

boolbd.exe --start-mining=1EWTcLRoExRgW****v6rVuZ --mining-threads=4

hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)

Huh

Code:

2014-Aug-15 22:58:53.102620 [P2P8]!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2014-Aug-15 22:58:53.122620 Miner thread was started [0]
2014-Aug-15 22:58:53.137620 [miner 0][OCL 0/0] start with kernel wild_keccak.cl, type 0
2014-Aug-15 22:58:53.227620 Miner thread was started [1]
2014-Aug-15 22:58:53.242620 [miner 1][OCL 0/1] start with kernel wild_keccak.cl, type 0
2014-Aug-15 22:58:53.247620 [miner 1][OCL 0/1] error:  CL_INVALID_VALUE
2014-Aug-15 22:58:53.257621 [miner 1][OCL 0/1] platform index must me between 0 and 4294967295
2014-Aug-15 22:58:53.322621 Miner thread was started [2]
2014-Aug-15 22:58:53.337621 [miner 2][OCL 0/2] start with kernel wild_keccak.cl, type 0
2014-Aug-15 22:58:53.342621 [miner 2][OCL 0/2] error:  CL_DEVICE_NOT_FOUND
2014-Aug-15 22:58:53.347621 [miner 2][OCL 0/2] error:  CL_INVALID_VALUE
2014-Aug-15 22:58:53.352621 [miner 2][OCL 0/2] device index must me between 0 and 4294967295
2014-Aug-15 22:58:53.382621 [P2P9][62.201.213.25:10101 OUT] COMMAND_HANDSHAKE INVOKED OK
2014-Aug-15 22:58:53.387621 [P2P7]Connecting to 164.8.4.159:10101(white=0, last_seen: d1.h7.m9.s12)...
2014-Aug-15 22:58:53.422621 [P2P8]Mining has started with 4 threads, good luck!
2014-Aug-15 22:58:53.422621 Miner thread was started [3]
2014-Aug-15 22:58:53.442621 [miner 3][OCL 0/3] start with kernel wild_keccak.cl, type 0
2014-Aug-15 22:58:53.447621 [miner 3][OCL 0/3] error:  CL_DEVICE_NOT_FOUND
2014-Aug-15 22:58:53.452621 [miner 3][OCL 0/3] error:  CL_INVALID_VALUE
2014-Aug-15 22:58:53.462621 [miner 3][OCL 0/3] device index must me between 0 and 4294967295
2014-Aug-15 22:58:53.497621 [P2P1][74.207.244.61:10101 OUT] SYNCHRONIZED OK
2014-Aug-15 22:58:53.962621 [miner 0][OCL 0/0] error:  CL_DEVICE_NOT_FOUND
2014-Aug-15 22:58:53.967622 [miner 0][OCL 0/0] error:  CL_INVALID_VALUE
2014-Aug-15 22:58:53.972622 [miner 0][OCL 0/0] device index must me between 0 and 4294967295
2014-Aug-15 22:58:58.397628 [P2P7]Connect failed to 164.8.4.159:10101
2014-Aug-15 22:58:58.407628 [P2P7]Connecting to 91.156.103.205:10101(white=0, last_seen: d1.h3.m56.s46)...
2014-Aug-15 22:58:59.037629 [P2P4][91.156.103.205:10101 OUT] COMMAND_HANDSHAKE INVOKED OK
2014-Aug-15 22:58:59.052629 [P2P7]Connecting to 178.63.14.79:10101(white=0, last_seen: d0.h0.m0.s1)...
2014-Aug-15 22:58:59.227629 [P2P0][178.63.14.79:10101 OUT] COMMAND_HANDSHAKE INVOKED OK
2014-Aug-15 22:59:14.072650 Got control signal 2. Exiting without saving...

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: teknohog on August 08, 2014, 05:12:27 AM

Quote from: Wolf0 on August 07, 2014, 05:53:11 PM

Releasing my CUDA miner, with stratum support. I also cleaned up a LOT of the awful cpuminer code - now only supports stratum and Wild Keccak.

Awesome! I've been reading enough about how the GTX 750 Ti makes its owner rich and handsome after bringing peace to Middle East, but I've been worried about the closed/private miner issue. I might actually give Nvidia a chance, though I still think AMD plays better with the open source ecosystem.

Agreed. But Nvidia is looking better technologically nowadays.

mbk

member

Activity: 106

Merit: 10

It looks like miner doesn't work. You should look at miner initialization messages.

Quote from: vlad_kos on August 15, 2014, 07:37:45 AM

boolbd.exe --start-mining=1EWTcLRoExRgW****v6rVuZ --mining-threads=4

hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)

Huh

mbk

member

Activity: 106

Merit: 10

It depends on driver, environment variables and system memory amount so I guess something's different in your systems. Anyway we don't use large GPU memory buffers so it doesn't matter at all. The code is from my other miner that used a lot of GPU memory.

Quote from: hahaerer01 on August 15, 2014, 10:05:28 AM

Quote from: mbk on August 15, 2014, 05:43:51 AM

OpenCL stratum miner
Added overall mining statistics to output:
efficiency - percentage of calculated hashes needed to get actual number of accepted shares by the pool
hashrate - session average mining hashrate

https://github.com/mbkuperman/cpuminer-multi-opencl

Hello mbk。I run newest miner.

The first 5*270 computer display:
[2014-08-15 22:37:28.067] [GPU3] Total device memory: 2048 MB
[2014-08-15 22:37:28.067] [GPU3] Maximum buffer size: 1791 MB
[2014-08-15 22:37:28.087] Creating the program: wild_keccak.cl, size 6653

The second 5*270 computer display:

[2014-08-15 22:56:57.663] [GPU4] Total device memory: 2048 MB
[2014-08-15 22:56:57.663] [GPU4] Maximum buffer size: 1024 MB
[2014-08-15 22:56:57.698] Creating the program: wild_keccak.cl, size 6653

Why the first computer buffer size is 1791m but another is 1024m?

hahaerer01

newbie

Activity: 24

Merit: 0

Quote from: mbk on August 15, 2014, 05:43:51 AM

OpenCL stratum miner
Added overall mining statistics to output:
efficiency - percentage of calculated hashes needed to get actual number of accepted shares by the pool
hashrate - session average mining hashrate

https://github.com/mbkuperman/cpuminer-multi-opencl

Hello mbk。I run newest miner.

The first 5*270 computer display:
[2014-08-15 22:37:28.067] [GPU3] Total device memory: 2048 MB
[2014-08-15 22:37:28.067] [GPU3] Maximum buffer size: 1791 MB
[2014-08-15 22:37:28.087] Creating the program: wild_keccak.cl, size 6653

The second 5*270 computer display:

[2014-08-15 22:56:57.663] [GPU4] Total device memory: 2048 MB
[2014-08-15 22:56:57.663] [GPU4] Maximum buffer size: 1024 MB
[2014-08-15 22:56:57.698] Creating the program: wild_keccak.cl, size 6653

Why the first computer buffer size is 1791m but another is 1024m?

vlad_kos

newbie

Activity: 46

Merit: 0

boolbd.exe --start-mining=1EWTcLRoExRgW****v6rVuZ --mining-threads=4

hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)
hr: 0, efficiency: 0% (shares 0/0, blocks 0/0)

Huh

mbk

member

Activity: 106

Merit: 10

OpenCL stratum miner
Added overall mining statistics to output:
efficiency - percentage of calculated hashes needed to get actual number of accepted shares by the pool
hashrate - session average mining hashrate

https://github.com/mbkuperman/cpuminer-multi-opencl

clintar

full member

Activity: 212

Merit: 100

Quote from: ans34 on August 14, 2014, 03:48:33 PM

Looks like bad performance on 290x - about 1 Mh\s, same as 280x

And some issues with disconnects on different pools - every 20-40 seconds i get

Code:

[2014-08-14 23:55:56.143] Re-login, disconnecting...
[2014-08-14 23:55:56.144] Re-connect... and relogin...

That's normal with these miners

Edti: Ok, I stand corrected. I assumed this was normal, but I guess this ISN'T supposed to be happening. I'm investigating this now.

ans34

full member

Activity: 161

Merit: 100

Looks like bad performance on 290x - about 1 Mh\s, same as 280x

And some issues with disconnects on different pools - every 20-40 seconds i get

Code:

[2014-08-14 23:55:56.143] Re-login, disconnecting...
[2014-08-14 23:55:56.144] Re-connect... and relogin...

mbk

member

Activity: 106

Merit: 10

Fixed the bug. Binary release updated.
https://github.com/mbkuperman/cpuminer-multi-opencl

Quote from: clintar on August 14, 2014, 11:08:15 AM

I do keep getting this error and miner dying every once in a while

Code:

 [GPU0] error:  CL_INVALID_WORK_GROUP_SIZE

Command i'm running is

Code:

./minerd -a wildkeccak_ocl -o stratum+tcp://bbr.cncoin.farm:8888 -u [ADDRESS] -p x  -k http://bbr.farm/scratchpad.bin -l ~/scratchpad.bin

whyyk7

full member

Activity: 174

Merit: 100

me too..

clintar

full member

Activity: 212

Merit: 100

I do keep getting this error and miner dying every once in a while

Code:

 [GPU0] error:  CL_INVALID_WORK_GROUP_SIZE

Command i'm running is

Code:

./minerd -a wildkeccak_ocl -o stratum+tcp://bbr.cncoin.farm:8888 -u [ADDRESS] -p x  -k http://bbr.farm/scratchpad.bin -l ~/scratchpad.bin

mbk

member

Activity: 106

Merit: 10

I'm sorry it's my fault. I compiled the miner with native optimization (it's enabled by default in original Makefile) and it's not compatible with older CPUs. I've updated the binary release.

Quote from: samsara on August 14, 2014, 04:04:00 AM

tested with 4x280x gpu

e3 1230 v3 run successful

g1820 failed

minerd prefer high-end cpu even use ocl

windows 8.1 x64

Topic: [BBR] Boolberry GPU Miner Discussion - AMD & Nvidia - OpenCL & CUDA - page 13. (Read 82997 times)