Code:
"thread_delay": 2000
...how performs the 750ti?
470K..Palit 750Ti Dual Stormx
370K..MSI 750Ti Gaming
Topic: [BBR] Boolberry: Privacy and Security - Guaranteed Since 2014 - page 368. (Read 1210752 times)
...how performs the 750ti?
470K..Palit 750Ti Dual Stormx
370K..MSI 750Ti Gaming
Code:
"thread_delay": 2000
...how performs the 750ti?
Here is simple calculation what to expect with solo mining:
Current difficulty from http://boolberry.com/state.html - 200GH
It means you need 200*1024 seconds to find a block with 1Mhs mining power (280X).
There are 86400 seconds in a day so expect to find a block on average every 200000/86000 = 2 days 8 hours.
It will take 4 days 16 hours for a 500khs card (6870, 750Ti) and so on.
Don't be afraid to mine few days without any result. I've implemented low difficulty shares (like you do with a pool) so you can check everything works as expected. If you get efficiency about 100% the calculation above is correct. Anyway you cannot get anything for sure with random process like mining. So don't blame me if you get nothing in a week.
Current difficulty from http://boolberry.com/state.html - 200GH
It means you need 200*1024 seconds to find a block with 1Mhs mining power (280X).
There are 86400 seconds in a day so expect to find a block on average every 200000/86000 = 2 days 8 hours.
It will take 4 days 16 hours for a 500khs card (6870, 750Ti) and so on.
Don't be afraid to mine few days without any result. I've implemented low difficulty shares (like you do with a pool) so you can check everything works as expected. If you get efficiency about 100% the calculation above is correct. Anyway you cannot get anything for sure with random process like mining. So don't blame me if you get nothing in a week.
Use command line parameter. Moreover read my previous message on multi GPU configurations.
I'm so new with BBR and I try to SOLO with this Boolberry OpenCL miner.
Does this seem to be OK with my 750Tis?
It seems like only miner0 is working, other 5 cards are not.
Code:
--mining-threads=5
I'm so new with BBR and I try to SOLO with this Boolberry OpenCL miner.
Does this seem to be OK with my 750Tis?
It seems like only miner0 is working, other 5 cards are not.
Actually I already set "--mining-threads=6"
Code:
"thread_delay": 2000
Use command line parameter. Moreover read my previous message on multi GPU configurations.
I'm so new with BBR and I try to SOLO with this Boolberry OpenCL miner.
Does this seem to be OK with my 750Tis?
It seems like only miner0 is working, other 5 cards are not.
Code:
--mining-threads=5
I'm so new with BBR and I try to SOLO with this Boolberry OpenCL miner.
Does this seem to be OK with my 750Tis?
It seems like only miner0 is working, other 5 cards are not.
2014-Jul-20 11:43:45.429697 [P2P1][54.83.92.170:10101 OUT] SYNCHRONIZED OK
2014-Jul-20 11:43:46.337749 [P2P4][202.198.97.236:10101 OUT] COMMAND_HANDSHAKE I
NVOKED OK
2014-Jul-20 11:43:46.341749 [P2P9]Connecting to 2.179.176.194:10101(white=0, las
t_seen: d0.h0.m0.s5)...
2014-Jul-20 11:43:47.329806 [P2P8][2.179.176.194:10101 OUT] COMMAND_HANDSHAKE IN
VOKED OK
2014-Jul-20 11:43:47.333806 [P2P9]Connecting to 195.12.60.154:10101(white=0, las
t_seen: d0.h0.m0.s4)...
2014-Jul-20 11:43:47.428811 [P2P2][195.12.60.154:10101 OUT] COMMAND_HANDSHAKE IN
VOKED OK
for the rest nothing happen? He also say: mining has started with 1 thread, good luck!
i've never had so much problems with start mining, but boolberry want to let my head explode?
I will try 1 hour more, if not i just move to another coin, because this is waste of time (except, it looks like that..)
From problems with ??downloading scratch file?? (wtf i never had to download an scratch file for start mining,), to wallet problems, to mining problems, with pool problems, i only have problems with this coin?
2014-Jul-20 11:43:46.337749 [P2P4][202.198.97.236:10101 OUT] COMMAND_HANDSHAKE I
NVOKED OK
2014-Jul-20 11:43:46.341749 [P2P9]Connecting to 2.179.176.194:10101(white=0, las
t_seen: d0.h0.m0.s5)...
2014-Jul-20 11:43:47.329806 [P2P8][2.179.176.194:10101 OUT] COMMAND_HANDSHAKE IN
VOKED OK
2014-Jul-20 11:43:47.333806 [P2P9]Connecting to 195.12.60.154:10101(white=0, las
t_seen: d0.h0.m0.s4)...
2014-Jul-20 11:43:47.428811 [P2P2][195.12.60.154:10101 OUT] COMMAND_HANDSHAKE IN
VOKED OK
for the rest nothing happen? He also say: mining has started with 1 thread, good luck!
i've never had so much problems with start mining, but boolberry want to let my head explode?
I will try 1 hour more, if not i just move to another coin, because this is waste of time (except, it looks like that..)
From problems with ??downloading scratch file?? (wtf i never had to download an scratch file for start mining,), to wallet problems, to mining problems, with pool problems, i only have problems with this coin?
Set thread_delay in miner_conf.json to 2000 (2 seconds) or even more. It could help in multi GPU configurations. Moreover you can run 3 miners independently. Copy you data directory for each instance, set device_index in miner_conf.json in copied directories to 1 and 2 and run 3 instances
Moreover it makes sense to reboot before changing anything.
Code:
boolbd --data-dir--start-mining= --mining-threads=1
boolbd --data-dir--start-mining= --mining-threads=1
boolbd --data-dir--start-mining= --mining-threads=1
Stupid question.
If I am running the qt wallet and solo mining. Does the blocks go to the qt wallet or doe I still need to run the simple wallet to get the blocks?
EDIT:
I have a 280x, 270x, and 270.
I put in the threads for 3 but only gpu 0 (280x) runs.
I get for the other 2 "cl invalid value, platform value must be between 0 & 4294967295"
I also get that on my 750ti's
If I am running the qt wallet and solo mining. Does the blocks go to the qt wallet or doe I still need to run the simple wallet to get the blocks?
EDIT:
I have a 280x, 270x, and 270.
I put in the threads for 3 but only gpu 0 (280x) runs.
I get for the other 2 "cl invalid value, platform value must be between 0 & 4294967295"
I also get that on my 750ti's
i did read but did anybocy cheked for viruses and such - since its made by new user?
you guys vouch for it?
you guys vouch for it?
it seems fine to me.
yes nothing is clear in this thread............................
you have to do a bit of poking around. the info is out there.
Aside from the GPU miner that was released today, what is unclear? I have tried to keep all instructions up to date. We did not know mbk was even working on a GPU miner until he released it. I will have instructions up by tomorrow morning (US time). In the mean time, use boolbd to solo mine. This is command line for single GPU:
Code:
boolbd.exe --start-mining
As I posted earlier, all files in the downloadable ZIP are clean:
https://www.virustotal.com/en/file/70db24dfa1b09d201455464ee6f04704575c8dffb0d14c17ca9344a7accb4a7d/analysis/1405802537/
https://www.virustotal.com/en/file/6d417055ea9bb52982275cfc80ca6d18de9d6dd37d41729e02eed11d52eaea1a/analysis/1405802602/
https://www.virustotal.com/en/file/1c2f7d2d4dcbb1b80246d97295afa25791bbe0d6967ef3266011707d47e3b619/analysis/1405802865/
https://www.virustotal.com/en/file/1947d655cf1a91bfa8d6737c2abe61e59c929c0dc982804ab6c44ce22466b122/analysis/1405803269/
I tested on my Radeon HD6940 and got 575KH/s.
The source needs to be looked over to verify it utilizes the GPU correctly. There are more comments in the bounty thread: https://bitcointalksearch.org/topic/bbr-boolberry-gpu-miner-discussion-amd-nvidia-opencl-cuda-693118
this oesnt qt need to be open in server mode or at all? just need to run solomine thinge?
i did read but did anybocy cheked for viruses and such - since its made by new user?
you guys vouch for it?
you guys vouch for it?
it seems fine to me.
yes nothing is clear in this thread............................
you have to do a bit of poking around. the info is out there.
Aside from the GPU miner that was released today, what is unclear? I have tried to keep all instructions up to date. We did not know mbk was even working on a GPU miner until he released it. I will have instructions up by tomorrow morning (US time). In the mean time, use boolbd to solo mine. This is command line for single GPU:
Code:
boolbd.exe --start-mining
As I posted earlier, all files in the downloadable ZIP are clean:
https://www.virustotal.com/en/file/70db24dfa1b09d201455464ee6f04704575c8dffb0d14c17ca9344a7accb4a7d/analysis/1405802537/
https://www.virustotal.com/en/file/6d417055ea9bb52982275cfc80ca6d18de9d6dd37d41729e02eed11d52eaea1a/analysis/1405802602/
https://www.virustotal.com/en/file/1c2f7d2d4dcbb1b80246d97295afa25791bbe0d6967ef3266011707d47e3b619/analysis/1405802865/
https://www.virustotal.com/en/file/1947d655cf1a91bfa8d6737c2abe61e59c929c0dc982804ab6c44ce22466b122/analysis/1405803269/
I tested on my Radeon HD6940 and got 575KH/s.
The source needs to be looked over to verify it utilizes the GPU correctly. There are more comments in the bounty thread: https://bitcointalksearch.org/topic/bbr-boolberry-gpu-miner-discussion-amd-nvidia-opencl-cuda-693118
I'm so new with BBR and I try to SOLO with this Boolberry OpenCL miner.
Does this seem to be OK with my 750Tis?
It seems like only miner0 is working, other 5 cards are not.
i did read but did anybocy cheked for viruses and such - since its made by new user?
you guys vouch for it?
you guys vouch for it?
it seems fine to me.
yes nothing is clear in this thread............................
you have to do a bit of poking around. the info is out there.
so whats up with GPU AMD miner ?
OpenCL = AMD. Released today. Read previous posts.
you guys vouch for it?
also - how to NOT solo mine but poolmine?
yes nothing is clear in this thread............................
so whats up with GPU AMD miner ?
OpenCL = AMD. Released today. Read previous posts.
you guys vouch for it?
also - how to NOT solo mine but poolmine?
so whats up with GPU AMD miner ?
OpenCL = AMD. Released today. Read previous posts.
so whats up with GPU AMD miner ?
Good news!
I've uploaded new build (v0.2.0.27(7460089)) where fixed issue with not displayed transfers.
i'll leave it running while i'm out and let you know what happens
one hour later:
Quote
hr: 342227, efficiency: 84% (shares 54/54, blocks 0/0)
works out to about 2.25 bbr a day. not cost efficient but mining never has been for me
Good news!
I've uploaded new build (v0.2.0.27(7460089)) where fixed issue with not displayed transfers.
Stupid question.
If I am running the qt wallet and solo mining. Does the blocks go to the qt wallet or doe I still need to run the simple wallet to get the blocks?
Blocks goes to that address that you pointed at start_mining command. So it is no matter if you use qt wallet or simplewallet, it depends only of address. If I am running the qt wallet and solo mining. Does the blocks go to the qt wallet or doe I still need to run the simple wallet to get the blocks?
Stupid question.
If I am running the qt wallet and solo mining. Does the blocks go to the qt wallet or doe I still need to run the simple wallet to get the blocks?
EDIT:
I have a 280x, 270x, and 270.
I put in the threads for 3 but only gpu 0 (280x) runs.
I get for the other 2 "cl invalid value, platform value must be between 0 & 4294967295"
I also get that on my 750ti's
If I am running the qt wallet and solo mining. Does the blocks go to the qt wallet or doe I still need to run the simple wallet to get the blocks?
EDIT:
I have a 280x, 270x, and 270.
I put in the threads for 3 but only gpu 0 (280x) runs.
I get for the other 2 "cl invalid value, platform value must be between 0 & 4294967295"
I also get that on my 750ti's
Jump to: