[BCN] Bytecoin. Secure, private, untraceable since 2012 - page 329.

CoinCube

legendary

Activity: 1946

Merit: 1055

Quote from: kneim on May 28, 2014, 08:49:53 PM

Quote from: CoinCube on May 28, 2014, 08:30:25 AM

Anyone want to take pity on a linux noob. I am trying to graduate to linux and wanted to see if I could get a machine up and mining Bytecoin.

My Setup:
Operating System PIMP 64 bit (copied to a 250gb HD with resized partitions to allow enough space for the Bytecoin blockchain)

Problem:
When I decompress the bytecoin-linux.tar.gz file I get a segmentation error.
...

In Linux the corresponding command is the "ls" (list) command, so type:
ls -l

For help on this command type:
man ls

Thanks, I think the problem was with the PIMP OS which was designed to run off a USB stick, I installed Zorin instead and everything worked smoothly.

Can anyone tell me where ByteCoin stores the blockchain in a linux system once it's downloaded and synchronized. I have fully synchronized the blockchain and want to copy it over to my other computer so I don't have to do it again but I can not find it.

kneim

legendary

Activity: 1666

Merit: 1000

I found the linux binaries seem to be up-to-date, the current download is version 0.8.9.65. It's not necessary to compile it myself, very good.

kneim

legendary

Activity: 1666

Merit: 1000

Quote from: CoinCube on May 28, 2014, 08:30:25 AM

Anyone want to take pity on a linux noob. I am trying to graduate to linux and wanted to see if I could get a machine up and mining Bytecoin.

My Setup:
Operating System PIMP 64 bit (copied to a 250gb HD with resized partitions to allow enough space for the Bytecoin blockchain)

Problem:
When I decompress the bytecoin-linux.tar.gz file I get a segmentation error.

Now I have never tried to decompress tar files before so it is possible I am doing something wrong.
The command used is "tar -zxvf bytecoin-linux.tar.gz" this seems to work. It runs without error and decompresses the files to the subdirectory called root/Downloads/bytecoin.

I can see all of the decompressed files when I explore the disk with iceweasel. However, when I try to access them via the terminal I can get into the directory but at that point I cannot see them. The command "dir" returns "segmentation error".

My linux experience is very limited. Am I doing something wrong in the decompress process?

In Linux the corresponding command is the "ls" (list) command, so type:
ls -l

For help on this command type:
man ls

33zer0w0lf

full member

Activity: 224

Merit: 100

http://bcn.extremepool.org

sorryforthat

hero member

Activity: 994

Merit: 500

Quote from: Rytir_fik on May 28, 2014, 01:13:09 PM

Quote from: surfer43 on May 28, 2014, 01:10:44 PM

Quote from: Rytir_fik on May 28, 2014, 12:55:21 PM

FYI:
minergate message - go to the web for more info.

Dear users,

We would like to inform you about the problem our and other pools are facing. The percentage of orphaned blocks for BCN, QZR and MRO is extremely high now. Our pool is working with PPS model which means that with every orphaned block we take losses. Due to this problem we are forced to temporary increase mining fee the following cryptocurrencies:

Bytecoin – 20%
Monero – 35%
QuazarCoin – 32%
Bitcoin & Litecoin – 2,5%

We are doing our best to minimize orphans. Commission will be decreased in the nearest future.

reasonable.

In this situation is better to stay in the pool or start mining without pool?

Why not just switch pools. We have been getting about 1 block an hour with 1 out of 5 being orphan over at EXT-Pool. and thats with a 3khs total speed and only 3 workers.

surfer43

sr. member

Activity: 560

Merit: 250

"Trading Platform of The Future!"

Quote from: Rytir_fik on May 28, 2014, 01:13:09 PM

In this situation is better to stay in the pool or start mining without pool?

The orphan rate is highest with a low hashrate. The larger the pool / solo miner hashrate, the lower the orphan rate. So you're best off mining in the largest pool. However this leads to centralization...

Rytir_fik

full member

Activity: 139

Merit: 100

Quote from: surfer43 on May 28, 2014, 01:10:44 PM

Quote from: Rytir_fik on May 28, 2014, 12:55:21 PM

FYI:
minergate message - go to the web for more info.

Dear users,

We would like to inform you about the problem our and other pools are facing. The percentage of orphaned blocks for BCN, QZR and MRO is extremely high now. Our pool is working with PPS model which means that with every orphaned block we take losses. Due to this problem we are forced to temporary increase mining fee the following cryptocurrencies:

Bytecoin – 20%
Monero – 35%
QuazarCoin – 32%
Bitcoin & Litecoin – 2,5%

We are doing our best to minimize orphans. Commission will be decreased in the nearest future.

reasonable.

In this situation is better to stay in the pool or start mining without pool?

TooDumbForBitcoin

legendary

Activity: 1638

Merit: 1001

Quote from: Rytir_fik on May 28, 2014, 12:55:21 PM

FYI:
minergate message - go to the web for more info.

Dear users,

We would like to inform you about the problem our and other pools are facing. The percentage of orphaned blocks for BCN, QZR and MRO is extremely high now. Our pool is working with PPS model which means that with every orphaned block we take losses. Due to this problem we are forced to temporary increase mining fee the following cryptocurrencies:

Bytecoin – 20%
Monero – 35%
QuazarCoin – 32%
Bitcoin & Litecoin – 2,5%

We are doing our best to minimize orphans. Commission will be decreased in the nearest future.

More creative than the average troll.

surfer43

sr. member

Activity: 560

Merit: 250

"Trading Platform of The Future!"

Quote from: Rytir_fik on May 28, 2014, 12:55:21 PM

FYI:
minergate message - go to the web for more info.

Dear users,

We would like to inform you about the problem our and other pools are facing. The percentage of orphaned blocks for BCN, QZR and MRO is extremely high now. Our pool is working with PPS model which means that with every orphaned block we take losses. Due to this problem we are forced to temporary increase mining fee the following cryptocurrencies:

Bytecoin – 20%
Monero – 35%
QuazarCoin – 32%
Bitcoin & Litecoin – 2,5%

We are doing our best to minimize orphans. Commission will be decreased in the nearest future.

That's reasonable. There have been *tons* of Monero orphans recently.

Rytir_fik

full member

Activity: 139

Merit: 100

FYI:
minergate message - go to the web for more info.

Dear users,

We would like to inform you about the problem our and other pools are facing. The percentage of orphaned blocks for BCN, QZR and MRO is extremely high now. Our pool is working with PPS model which means that with every orphaned block we take losses. Due to this problem we are forced to temporary increase mining fee the following cryptocurrencies:

Bytecoin – 20%
Monero – 35%
QuazarCoin – 32%
Bitcoin & Litecoin – 2,5%

We are doing our best to minimize orphans. Commission will be decreased in the nearest future.

werrindor

member

Activity: 98

Merit: 10

BCN does not seem to have a sufficient margin of safety - if difficulty grows by one third - the profitability will surely decrease.

Doretteign

newbie

Activity: 13

Merit: 0

Quote from: tjkurtisss on May 28, 2014, 10:14:43 AM

Nah, QCN does not look worth mining at the moment, I guess I’ll switch to something else. FCN, maybe

But if everybody wouldn't mine QCN because of difficulty, it will become quite expensive... Maybe it's a good idea to mine it for a while and wait when its price become as high as skyscrappers in NYC? Looking for your answer.

JJKirsch

member

Activity: 73

Merit: 10

Quote from: DStrange on May 28, 2014, 05:02:33 AM

I have made some calculations on CryptoNote based coins profitability yesterday:

Hm, the calculation does not seem to be totally correct - there’s a block reward penalty to be taken into account - which can have a serious effect on profitability.

Jakesor

newbie

Activity: 18

Merit: 0

Quote from: Xello on May 28, 2014, 09:33:14 AM

Is there a website or usefull application which could help me to get this stuff automatically? Just woundering because it will make things clearer and easier for newbies!

Oh, man, if you are new one and you really want to be good at BCN, you shouldn't look for automaticlally servises or appliications. I think it would be better for you to visit some official web-sites (like "bytecoin.org"), keep your eyes on newsletters and read some articles about that. After spending days trying to understand how it works, you'll become a true Guru of cryptocurrency and all tends that we've got currently!

tjkurtisss

member

Activity: 80

Merit: 10

Quote from: Rias on May 28, 2014, 05:22:54 AM

Quote from: DStrange on May 28, 2014, 05:02:33 AM

I have made some calculations on CryptoNote based coins profitability yesterday:

DIFF is difficulty (Mh)
PRICE is price of 1 coin in BTC via https://cryptonote.exchange.to/market/bcn/btc
BR is block reward, BR(BTC) is block reward price in BTC
PROF is mining profitability (BTC you get per 1Mh)

So my intuitive decision to switch my hash power back to BCN was after all correct.

I wonder whether this consideration indeed affect the miners' decisions (at least like me, on intuitive level). QCN's price dropped recently, and so did the difficulty. FCN had it vice versa.

Ironically, even with the current low value of BCN, it is still most profitable to mine. And even more ironically, due to the very "low" price nobody is mining. Come on people, if you compare BCN's price with MRO, just keep in mind that the number of total coins supply is 10,000 times larger than in MRO.

Nah, QCN does not look worth mining at the moment, I guess I’ll switch to something else. FCN, maybe

Patron92

full member

Activity: 234

Merit: 100

Quote from: Rias on May 28, 2014, 05:22:54 AM

Quote from: DStrange on May 28, 2014, 05:02:33 AM

How come BCN difficulty is that low? Can this be true? I am quite surprised to see this stats

Xello

newbie

Activity: 15

Merit: 0

Quote from: DStrange on May 28, 2014, 05:02:33 AM

I have made some calculations on CryptoNote based coins profitability yesterday:

DIFF is difficulty (Mh)
PRICE is price of 1 coin in BTC via https://cryptonote.exchange.to/market/bcn/btc
BR is block reward, BR(BTC) is block reward price in BTC
PROF is mining profitability (BTC you get per 1Mh)

Wow, dude, thx you so much! Is there a website or usefull application which could help me to get this stuff automatically? Just woundering because it will make things clearer and easier for newbies!

Xello

newbie

Activity: 15

Merit: 0

Quote from: CoinCube on May 28, 2014, 08:30:25 AM

Anyone want to take pity on a linux noob. I am trying to graduate to linux and wanted to see if I could get a machine up and mining Bytecoin.

Problem:
When I decompress the bytecoin-linux.tar.gz file I get a segmentation error.

Now I have never tried to decompress tar files before so it is possible I am doing something wrong.
The command used is "tar -zxvf bytecoin-linux.tar.gz" this seems to work. It runs without error and decompresses the files to the subdirectory called root/Downloads/bytecoin.

I can see all of the decompressed files when I explore the disk with iceweasel. However, when I try to access them via the terminal I can get into the directory but at that point I cannot see them. The command "dir" returns "segmentation error".

My linux experience is very limited. Am I doing something wrong in the decompress process?

The same question. I'm about to install SteamOS and i never used linux before but want to. Does this problem has a solution on Linux? And which version of Linux should i install to solve it? (maybe SteamOS isn't a good decision?)

CoinCube

legendary

Activity: 1946

Merit: 1055

Anyone want to take pity on a linux noob. I am trying to graduate to linux and wanted to see if I could get a machine up and mining Bytecoin.

My Setup:
Operating System PIMP 64 bit (copied to a 250gb HD with resized partitions to allow enough space for the Bytecoin blockchain)

Problem:
When I decompress the bytecoin-linux.tar.gz file I get a segmentation error.

Now I have never tried to decompress tar files before so it is possible I am doing something wrong.
The command used is "tar -zxvf bytecoin-linux.tar.gz" this seems to work. It runs without error and decompresses the files to the subdirectory called root/Downloads/bytecoin.

I can see all of the decompressed files when I explore the disk with iceweasel. However, when I try to access them via the terminal I can get into the directory but at that point I cannot see them. The command "dir" returns "segmentation error".

My linux experience is very limited. Am I doing something wrong in the decompress process?

Russell1

full member

Activity: 140

Merit: 100

How long for unconfirmed balance to confirm? Waiting since yesterday

Topic: [BCN] Bytecoin. Secure, private, untraceable since 2012 - page 329. (Read 1070171 times)