Topic: Beginners Guide to CPU mining DogeCoins - Now with images! - page 4. (Read 88530 times)

Hi cainy393! Nice job with the tutorial. Very helpful. Much thanks. Wow.

not sure to be honest with you, mine just has the odd yay every few lines. Keep an eye on your pool for a couple hours and see if you get anything.

The bottom part of the log continues the same with no "yays" until I restart.  Is that normal, and am I getting shares for mining if it isn't saying "yay"?

They will be in your account on the pool you registered for. When you hit the withdrawal limit (most seem to have a limit of 10000 DOGE) you will be able to withdraw them to your DOGE wallet. I assume you have the dogecoin-qt client but if not download it here and then you will have an address to withdraw your earnings to. You can edit your address in the "Edit Account" page by pasting it in and entering your pin number to confirm identity.

What do you mean it misses threads? There is nothing wrong with the log above.

problem solved ! and i have 1 question where i will get Dogecoins ? sorry i am noob in this

Great advice on switching pools, after I did that it went through with no problems.  When it begins mining, there are batches of missed threads and then it will miss all threads after several minutes and I have to restart the miner program.  I am using an laptop just to get a feel for mining and don't expect any valuable returns.

[2013-12-17 15:08:23] accepted: 9351/9679 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9352/9680 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9353/9681 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9354/9682 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9355/9683 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9356/9684 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9357/9685 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9358/9686 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9359/9687 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] accepted: 9360/9688 (96.61%), 14.61 khash/s (yay!!!)
[2013-12-17 15:08:23] thread 0: 84 hashes, 3.36 khash/s
[2013-12-17 15:08:23] thread 2: 48 hashes, 3.43 khash/s
[2013-12-17 15:08:23] thread 3: 84 hashes, 3.50 khash/s
[2013-12-17 15:08:23] thread 0: 24 hashes, 4.00 khash/s
[2013-12-17 15:08:23] thread 3: 36 hashes, 3.60 khash/s
[2013-12-17 15:08:23] thread 2: 36 hashes, 3.27 khash/s
[2013-12-17 15:08:23] thread 0: 36 hashes, 3.60 khash/s
[2013-12-17 15:08:23] thread 1: 72 hashes, 3.43 khash/s

Looks like you've missed a 3 off the end of the port number. It should be 3333.

I get this error

Thank you again for all of your time and help.  This can be an overwhelming, frustrating journey for newbies like me...lol

minerd --url=stratum+tcp://mine2.coinmine.pl:6020 --userpass=papacrusher.papa1:papa





C:\Users\owner\Desktop\cpuminer>minerd --url=stratum+tcp://mine2.coinmine.
0 --userpass=papacrusher.papa1:papa
[2013-12-17 13:32:14] Starting Stratum on stratum+tcp://mine2.coinmine.pl:
[2013-12-17 13:32:14] 4 miner threads started, using 'scrypt' algorithm.
[2013-12-17 13:32:14] Binding thread 0 to cpu 0
[2013-12-17 13:32:14] Binding thread 1 to cpu 1
[2013-12-17 13:32:14] Binding thread 2 to cpu 2
[2013-12-17 13:32:14] Binding thread 3 to cpu 3
[2013-12-17 13:32:15] Stratum detected new block
[2013-12-17 13:32:15] thread 0: 36 hashes, 2.77 khash/s
[2013-12-17 13:32:16] accepted: 0/1 (0.00%), 2.77 khash/s (booooo)
[2013-12-17 13:32:16] thread 0: 564 hashes, 2.55 khash/s
[2013-12-17 13:32:16] thread 2: 1044 hashes, 4.86 khash/s
[2013-12-17 13:32:16] thread 2: 132 hashes, 3.47 khash/s
[2013-12-17 13:32:16] thread 0: 684 hashes, 3.26 khash/s
[2013-12-17 13:32:16] accepted: 0/2 (0.00%), 6.73 khash/s (booooo)
[2013-12-17 13:32:16] accepted: 0/3 (0.00%), 6.73 khash/s (booooo)
[2013-12-17 13:32:16] accepted: 0/4 (0.00%), 6.73 khash/s (booooo)
[2013-12-17 13:32:16] accepted: 0/5 (0.00%), 6.73 khash/s (booooo)
[2013-12-17 13:32:16] thread 3: 1848 hashes, 3.35 khash/s
[2013-12-17 13:32:16] thread 2: 1128 hashes, 3.51 khash/s
[2013-12-17 13:32:16] thread 3: 336 hashes, 3.57 khash/s
[2013-12-17 13:32:16] accepted: 0/6 (0.00%), 10.35 khash/s (booooo)
[2013-12-17 13:32:16] thread 2: 408 hashes, 3.61 khash/s
[2013-12-17 13:32:16] accepted: 0/7 (0.00%), 10.44 khash/s (booooo)
[2013-12-17 13:32:16] accepted: 0/8 (0.00%), 10.44 khash/s (booooo)
[2013-12-17 13:32:16] accepted: 0/9 (0.00%), 10.44 khash/s (booooo)
[2013-12-17 13:32:16] thread 1: 3600 hashes, 3.52 khash/s
[2013-12-17 13:32:17] thread 0: 2460 hashes, 3.62 khash/s
[2013-12-17 13:32:17] thread 3: 1620 hashes, 3.58 khash/s

First off, dont worry about revealing your worker name and password, all anyone could do if they knew it is mine for you haha. Secondly, can you either screenshot the log or copy and paste it so we can see exactly what its saying.

minerd --url=stratum+tcp://mine2.coinmine.pl:6020 --userpass=weblogin.worker:password

I changed the loging and password back for posting reasons.  The "boooo" would continue over and over.

BTW, trying this for securecoin

screenshot it? maybe post your run.bat file contents here so I can have a look?
Are you sure that boo wasn't just an orphaned block or something, did it start to work after that?

oops, spoke to soon, instead of the yay!!! I got booo

You, sir are a God among mortals .  Can't thank you enough, I'm not the most computer literate person and I have been fighting this thing for a week straight.  Much respect!

the evil chipug strikes again!

That means your login credentials are incorrect. Make sure your you are putting your username on the pool followed by a . followed by the worker name, which in the tutorial I suggested you make a 1. Then a : followed by your password, again I suggested you make this x.
So, if your me and your username is cainy393 on the pool's website and your worker name is one and your worker password is x then you login credentials are as follows:
Just to stress my point, here is a screenshot of how this appears on the "My Workers" page:


Hope this helps 

This tutorial has gotten me farther than most...lol, but I'm getting a "stratum failed to authenticate" error, any suggestions?