BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64 - page 19.

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: LPape on March 31, 2016, 07:07:37 PM

I be leave so I just got it . It's an s3+ http://www.ebay.ca/itm/191830001437

If it's working why are you worrying about it?

LPape

member

Activity: 84

Merit: 10

I be leave so I just got it . It's an s3+ http://www.ebay.ca/itm/191830001437

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: LPape on March 31, 2016, 06:51:47 PM

Quote from: toptek on March 31, 2016, 06:32:06 PM

Quote from: aarons6 on March 31, 2016, 05:04:30 PM

Quote from: toptek on March 31, 2016, 04:35:45 PM

just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not

.

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade

I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

'
a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask

".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .;

also found this

Bitmain Antminer S3

Support @ trunk r46236 mines @ 38 something .

Bitmain Antminer S3 Cryptocurrency Miner
Hash rate: 440 GH/s @ about 340 Watts

OEM Web Page https://www.bitmaintech.com
Hardware
Architecture    MIPS32
Vendor    Bitmain
Bootloader    U-Boot
System-On-Chip    Atheros AR9331
CPU @Freq    MIPS 24Kc @400MHz
Flash size    8 MiB
RAM    64 MiB
Wireless    Integrated Atheros 802.11b/g/n
Photos

and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk

no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should .

and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining

i really can't find much more

if you know how to use teamviewer I will let you try to connect it. http://www.teamviewer.com/en/ my skype name is Larry Pantlin black and white photo add me and I will pay 50$ in bitcoin to who ever can get this going for me.

Does the miner mine with cgminer?

LPape

member

Activity: 84

Merit: 10

Quote from: toptek on March 31, 2016, 06:32:06 PM

Quote from: aarons6 on March 31, 2016, 05:04:30 PM

Quote from: toptek on March 31, 2016, 04:35:45 PM

just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not

.

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade

I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

'
a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask

".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .;

also found this

Bitmain Antminer S3

Support @ trunk r46236 mines @ 38 something .

Bitmain Antminer S3 Cryptocurrency Miner
Hash rate: 440 GH/s @ about 340 Watts

OEM Web Page https://www.bitmaintech.com
Hardware
Architecture    MIPS32
Vendor    Bitmain
Bootloader    U-Boot
System-On-Chip    Atheros AR9331
CPU @Freq    MIPS 24Kc @400MHz
Flash size    8 MiB
RAM    64 MiB
Wireless    Integrated Atheros 802.11b/g/n
Photos

and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk

no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should .

and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining

i really can't find much more

if you know how to use teamviewer I will let you try to connect it. http://www.teamviewer.com/en/ my skype name is Larry Pantlin black and white photo add me and I will pay 50$ in bitcoin to who ever can get this going for me.

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: aarons6 on March 31, 2016, 05:04:30 PM

Quote from: toptek on March 31, 2016, 04:35:45 PM

just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not

.

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade

I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

'
a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask

".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .;

also found this

Bitmain Antminer S3

Support @ trunk r46236 mines @ 38 something .

Bitmain Antminer S3 Cryptocurrency Miner
Hash rate: 440 GH/s @ about 340 Watts

OEM Web Page https://www.bitmaintech.com
Hardware
Architecture    MIPS32
Vendor    Bitmain
Bootloader    U-Boot
System-On-Chip    Atheros AR9331
CPU @Freq    MIPS 24Kc @400MHz
Flash size    8 MiB
RAM    64 MiB
Wireless    Integrated Atheros 802.11b/g/n
Photos

and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk

no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should .

and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining

i really can't find much more

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: toptek on March 31, 2016, 04:35:45 PM

just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not

.

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade

I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

toptek

legendary

Activity: 1274

Merit: 1000

just found two new openwrt antminer s3 bin on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i may brick the controller .that said wtf why not

.

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade

I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

LPape

member

Activity: 84

Merit: 10

I am trying to build a config file maybe that will help.

      "pass" : "12345678",
      "pool-priority" : "0"
   },
   {
      "url" : "stratum+tcp://stratum.f2pool.com:25",
      "user" : "indigopsy.antminer",
      "pass" : "12345678",
      "pool-priority" : "1"
   },
   {
      "url" : "stratum+tcp://stratum.antpool.com:3333",
      "user" : "indigoant.antminer",
      "pass" : "12345678",
      "pool-priority" : "2"
   },
   {
      "url" : "stratum+tcp://stratum.antpool.com:25",
      "user" : "indigoant.antminer",
      "pass" : "12345678",
      "pool-priority" : "3"
   }
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"expiry-lp" : "3600",
"failover-switch-delay" : "300",
"log" : "20",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"no-show-processors" : true,
"no-show-procs" : true,
"no-unicode" : true,
"queue" : "0",
"quiet-work-updates" : true,
"quiet-work-update" : true,
"scan-time" : "1",
"skip-security-checks" : "0",
"submit-stale" : true,
"temp-hysteresis" : "3",
"shares" : 0,
"kernel-path" : "/usr/local/share/bfgminer",
"scan" : [
   "antminer:all"
],
"set-device" : [
   "antminer:voltage=x830",
   "antminer:clock=x982",
   "antminer:timing=0.0054"
]
}

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: LPape on March 31, 2016, 02:05:37 PM

If anyone can get me the answer I do have some coins.

forgot to add i even tired using

Code:

-S all

nothing .

you may want to follow this to if he does it

https://bitcointalksearch.org/topic/antminer-s1-s3-bin-modding-is-it-possible-1405821

I bet we can add BFG with no issue

LPape

member

Activity: 84

Merit: 10

If anyone can get me the answer I do have some coins.

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: LPape on March 31, 2016, 01:51:20 PM

you have to find it on your router and you go to a web page that just is a form of cgminer

I got a device to show but not hash

With SSH i assume ? . use screen but the S3 does not have screen on it like the S2/4 c1 s5 i think S7 . it's a bitch to get working right on a S3 i think i had screen on it once after i figured out what openwrt PKG i needed

@aarons6

you can start it that way in all most any windows version 7 and up . but have to use a ssh window is how he did, I'm guessing .

toptek

legendary

Activity: 1274

Merit: 1000

Those setting i got out of the pdf for that chip

and that is my issue to it works but won't hash or see the S1/3 . and the drivers are loaded i checked with the cat command .

LPape

member

Activity: 84

Merit: 10

you have to find it on your router and you go to a web page that just is a form of cgminer

I got a device to show but not hash

aarons6

legendary

Activity: 1736

Merit: 1006

Quote from: LPape on March 31, 2016, 01:44:02 PM

Quote from: Luke-Jr on March 31, 2016, 01:22:46 PM

I need more details on antminer problems to try to help.

I load up bfgminer, press M than press +. I add the following code to find my device. -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725. Press enter it does not find anything

S3+ antminer on windows 7. Bfgminer 5.4.2

how do you run s3 on windows 7?

LPape

member

Activity: 84

Merit: 10

Quote from: Luke-Jr on March 31, 2016, 01:22:46 PM

I need more details on antminer problems to try to help.

I load up bfgminer, press M than press +. I add the following code to find my device. -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725. Press enter it does not find anything

S3+ antminer on windows 7. Bfgminer 5.4.2

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: LPape on March 31, 2016, 01:26:17 PM

Quote from: toptek on March 31, 2016, 01:08:42 PM

Quote from: LPape on March 31, 2016, 11:20:18 AM

I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725

Code:

--set btm:clock=350

should be

Code:

--set btm:clock=225

Code:

--set btm:timeout=3

is some thing else i forget what

Code:

16 or 32

i think. layout not to sure about the rest looks about right.

I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz ..

I will try that out I think you mean it should look like this

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=225 --set btm:timeout= --set btm:voltage=x0725

sure if you need it like that .

Code:

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725

IS

Code:

--set btm:timeout=18

you may need also or like this.

Code:

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=18
--set btm:clock=225 --set btm:reg_data=0d82 --set btm:voltage=x0725

only one im not rally to sure about is

Code:

--set btm:layout=32:8

or what it even does. and can be why mine won't hash, can't say. I formated the answer that way to make it easy to see code from talk etc

.

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: Luke-Jr on March 31, 2016, 01:22:46 PM

I need more details on antminer problems to try to help.

A lot of pages back I posted s few times with what i tried and did, no one seemed to care , I even asked some one in a PM that seemed cool he was a real ass hole . no it was not ( luke ) you i asked .

after that i figured you either did not have time or wanted cash no dis respect intended or real life things were stopping you .I gave up and didn't push it.

LPape

member

Activity: 84

Merit: 10

Quote from: toptek on March 31, 2016, 01:08:42 PM

Quote from: LPape on March 31, 2016, 11:20:18 AM

I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725

Code:

--set btm:clock=350

should be

Code:

--set btm:clock=225

Code:

--set btm:timeout=3

is some thing else i forget what

Code:

16 or 32

i think. layout not to sure about the rest looks about right.

I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz ..

I will try that out I think you mean it should look like this

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=225 --set btm:timeout= --set btm:voltage=x0725

Luke-Jr

legendary

Activity: 2576

Merit: 1186

I need more details on antminer problems to try to help.

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: LPape on March 31, 2016, 11:20:18 AM

I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725

Code:

--set btm:clock=350

should be

Code:

--set btm:clock=225

Code:

--set btm:timeout=3

is some thing else i forget what

Code:

i think. layout not to sure about the rest looks about right.

I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz ..

Topic: BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64 - page 19. (Read 834514 times)