Topic: BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64 - page 23. (Read 834576 times)
January 28, 2016, 07:06:04 AM
Thanks!
January 24, 2016, 03:29:56 PM
I have 2 questions about bfgminer.
1. is it possible to make a file and preload for example 10 pools instead of one and then adding the rest of pools using P then A
If it's possible how can I do that?
2. Is it possible for bfgminer to have some pools and we put somehow if the diff of that coin goes below 2 mine it, if it goes higher mine on another pool ?
Or do you know of any program that uses a script for number 2? Preferably for raspberry pi but windows is OK too
Thanks
1. is it possible to make a file and preload for example 10 pools instead of one and then adding the rest of pools using P then A
If it's possible how can I do that?
2. Is it possible for bfgminer to have some pools and we put somehow if the diff of that coin goes below 2 mine it, if it goes higher mine on another pool ?
Or do you know of any program that uses a script for number 2? Preferably for raspberry pi but windows is OK too
Thanks
one place but it costs sadly , but does work great, you pay for a well done service with emails all most daily, if you have it turned on .
https://v2.smarterhash.com/ is for script miners , only
For the PI try
Minera :
https://bitcointalksearch.org/topic/minera-v090-your-next-mining-dashboard-s9l3d3cpuminercgminerbfgminer-596620
in a update yet to be done Mich said he plans to add pool switching till then there is no ETA, he is real busy with other things but keeps minera, running well .
For pools you might want to try this
Stratehm/stratum-proxy
https://github.com/Stratehm/stratum-proxy
for loading in more then one pool the easy way:) .
This explains how to use the pool switching Strategy it uses here
https://bitcointalksearch.org/topic/m.12489739.
It all works with BFG on any PI type PC.
January 24, 2016, 06:10:46 AM
I have 2 questions about bfgminer.
1. is it possible to make a file and preload for example 10 pools instead of one and then adding the rest of pools using P then A
If it's possible how can I do that?
2. Is it possible for bfgminer to have some pools and we put somehow if the diff of that coin goes below 2 mine it, if it goes higher mine on another pool ?
Or do you know of any program that uses a script for number 2? Preferably for raspberry pi but windows is OK too
Thanks
1. is it possible to make a file and preload for example 10 pools instead of one and then adding the rest of pools using P then A
If it's possible how can I do that?
2. Is it possible for bfgminer to have some pools and we put somehow if the diff of that coin goes below 2 mine it, if it goes higher mine on another pool ?
Or do you know of any program that uses a script for number 2? Preferably for raspberry pi but windows is OK too
Thanks
January 23, 2016, 04:20:57 PM
use 5.4.1
. maybe give us your setting .I have just used 5.4.1 on windows and it seems to be OK.
I will test it for a few hours and report back
Thanks
January 21, 2016, 11:30:04 AM
I have problems when running bfgminer 4.2.2 (for zeus miner) on two operating systems.
I am using three gawminers fury's (same as zeus blizzard) total 4.2mh/s
When using bfgminer on windows 7 with one pool it's hashing around 3.5mh/s
if I add three pools and select rotate every 20 minutes it just sends a little hashrate to 2 or 3 pools like 0.3 and 0.6mh/s
it does not send the full hashrate only to the pool in turn.
Later on I changed strategy to balance on 3 pools and it just giving rejected shares.
I see similar problems on raspberry pi too with low hashrate, not good rotate etc.
What am I doing wrong?
I am using three gawminers fury's (same as zeus blizzard) total 4.2mh/s
When using bfgminer on windows 7 with one pool it's hashing around 3.5mh/s
if I add three pools and select rotate every 20 minutes it just sends a little hashrate to 2 or 3 pools like 0.3 and 0.6mh/s
it does not send the full hashrate only to the pool in turn.
Later on I changed strategy to balance on 3 pools and it just giving rejected shares.
I see similar problems on raspberry pi too with low hashrate, not good rotate etc.
What am I doing wrong?
use 5.4.1
. maybe give us your setting . January 21, 2016, 07:08:49 AM
I have problems when running bfgminer 4.2.2 (for zeus miner) on two operating systems.
I am using three gawminers fury's (same as zeus blizzard) total 4.2mh/s
When using bfgminer on windows 7 with one pool it's hashing around 3.5mh/s
if I add three pools and select rotate every 20 minutes it just sends a little hashrate to 2 or 3 pools like 0.3 and 0.6mh/s
it does not send the full hashrate only to the pool in turn.
Later on I changed strategy to balance on 3 pools and it just giving rejected shares.
I see similar problems on raspberry pi too with low hashrate, not good rotate etc.
What am I doing wrong?
I am using three gawminers fury's (same as zeus blizzard) total 4.2mh/s
When using bfgminer on windows 7 with one pool it's hashing around 3.5mh/s
if I add three pools and select rotate every 20 minutes it just sends a little hashrate to 2 or 3 pools like 0.3 and 0.6mh/s
it does not send the full hashrate only to the pool in turn.
Later on I changed strategy to balance on 3 pools and it just giving rejected shares.
I see similar problems on raspberry pi too with low hashrate, not good rotate etc.
What am I doing wrong?
January 18, 2016, 02:53:15 AM
Hello,
my 2 Bi*Fury are not so running good at BfgMiner 5.4.1 so i will test an older Version...
but a other Question BfgMiner supports the HexFury (v1) (NanoFury NF6)...
regards
my 2 Bi*Fury are not so running good at BfgMiner 5.4.1 so i will test an older Version...
but a other Question BfgMiner supports the HexFury (v1) (NanoFury NF6)...
regards
January 12, 2016, 06:33:49 PM
Try messing with those workarounds in README.ASIC...
I think you mean this:
Quote
BI*FURY
-------
Bi*Fury should just work; you may need to use -S bifury:
BIG PICTURE MINING BITFURY USB
------------------------------
These miners are sensitive to unexpected data. Usually you can re-plug them to
reset to a known-good initialisation state. To ensure they are properly detected
and used with BFGMiner, you must specify -S bigpic:all (or equivalent) options
prior to any other -S options (which might probe the device and confuse it).
-------
Bi*Fury should just work; you may need to use -S bifury:
BIG PICTURE MINING BITFURY USB
------------------------------
These miners are sensitive to unexpected data. Usually you can re-plug them to
reset to a known-good initialisation state. To ensure they are properly detected
and used with BFGMiner, you must specify -S bigpic:all (or equivalent) options
prior to any other -S options (which might probe the device and confuse it).
Quote
...
"scan" : [
"bifury:all",
"bigpic:all"
],
"usb" : ":9"
}
"scan" : [
"bifury:all",
"bigpic:all"
],
"usb" : ":9"
}
but it's the same:
Quote
-
[2016-01-13 00:28:47] Accepted 018c501b BPM 0 pool 2 Diff 165/98
[2016-01-13 00:28:58] Accepted 00af5a22 BPM 8 pool 2 Diff 373/98
[2016-01-13 00:29:08] Accepted 023cea76 BIF 1a pool 2 Diff 114/98
[2016-01-13 00:29:15] BIF 1: Unknown job id: job 3cd 56958c72 0
[2016-01-13 00:29:17] BIF 0: Unknown job id: job 38e 56958c72 0
[2016-01-13 00:29:28] Accepted 01b7c819 BPM 7 pool 2 Diff 149/98
[2016-01-13 00:29:46] BIF 0: Unknown job id: job 3ff 56958c8d 0
[2016-01-13 00:29:46] BIF 0: Unknown job id: job 400 56958c8e 1
[2016-01-13 00:30:03] Accepted 00500142 BPM 1 pool 2 Diff 819/98
[2016-01-13 00:30:06] Accepted 007a3527 BPM 4 pool 2 Diff 536/98
[2016-01-13 00:30:14] BIF 0: Unknown job id: job 44e 56958cab 1
[2016-01-13 00:30:14] BIF 0: Unknown job id: job 44f 56958cab 0
[2016-01-13 00:30:16] Accepted 0179e285 BPM 1 pool 2 Diff 173/98
[2016-01-13 00:30:42] BIF 0: Unknown job id: job 4b2 56958cc6 1
[2016-01-13 00:30:47] BIF 1: Unknown job id: job 4f0 56958ccc 1
[2016-01-13 00:30:48] BIF 1: Unknown job id: job 4f6 56958ccd 0
[2016-01-13 00:30:48] Accepted 01f2f008 BIF 0b pool 2 Diff 131/98
[2016-01-13 00:30:51] BIF 1: Unknown job id: job 516 56958cd2 0
[2016-01-13 00:30:59] Accepted 0153b3ac BPM 4 pool 2 Diff 192/98
[2016-01-13 00:31:02] BIF 0: Unknown job id: job 503 56958cda 0
[2016-01-13 00:31:06] BIF 0: Unknown job id: job 515 56958cdf 0
[2016-01-13 00:31:08] BIF 1: Unknown job id: job 551 56958ce1 0
[2016-01-13 00:31:08] BIF 1: Unknown job id: job 550 56958ce0 1
[2016-01-13 00:28:47] Accepted 018c501b BPM 0 pool 2 Diff 165/98
[2016-01-13 00:28:58] Accepted 00af5a22 BPM 8 pool 2 Diff 373/98
[2016-01-13 00:29:08] Accepted 023cea76 BIF 1a pool 2 Diff 114/98
[2016-01-13 00:29:15] BIF 1: Unknown job id: job 3cd 56958c72 0
[2016-01-13 00:29:17] BIF 0: Unknown job id: job 38e 56958c72 0
[2016-01-13 00:29:28] Accepted 01b7c819 BPM 7 pool 2 Diff 149/98
[2016-01-13 00:29:46] BIF 0: Unknown job id: job 3ff 56958c8d 0
[2016-01-13 00:29:46] BIF 0: Unknown job id: job 400 56958c8e 1
[2016-01-13 00:30:03] Accepted 00500142 BPM 1 pool 2 Diff 819/98
[2016-01-13 00:30:06] Accepted 007a3527 BPM 4 pool 2 Diff 536/98
[2016-01-13 00:30:14] BIF 0: Unknown job id: job 44e 56958cab 1
[2016-01-13 00:30:14] BIF 0: Unknown job id: job 44f 56958cab 0
[2016-01-13 00:30:16] Accepted 0179e285 BPM 1 pool 2 Diff 173/98
[2016-01-13 00:30:42] BIF 0: Unknown job id: job 4b2 56958cc6 1
[2016-01-13 00:30:47] BIF 1: Unknown job id: job 4f0 56958ccc 1
[2016-01-13 00:30:48] BIF 1: Unknown job id: job 4f6 56958ccd 0
[2016-01-13 00:30:48] Accepted 01f2f008 BIF 0b pool 2 Diff 131/98
[2016-01-13 00:30:51] BIF 1: Unknown job id: job 516 56958cd2 0
[2016-01-13 00:30:59] Accepted 0153b3ac BPM 4 pool 2 Diff 192/98
[2016-01-13 00:31:02] BIF 0: Unknown job id: job 503 56958cda 0
[2016-01-13 00:31:06] BIF 0: Unknown job id: job 515 56958cdf 0
[2016-01-13 00:31:08] BIF 1: Unknown job id: job 551 56958ce1 0
[2016-01-13 00:31:08] BIF 1: Unknown job id: job 550 56958ce0 1
January 12, 2016, 04:17:10 PM
I've updated the Mac binary of bfgminer on my site to 5.4.1
http://macminer.fabulouspanda.com/commandline/bfgminer/
http://macminer.fabulouspanda.com/commandline/bfgminer/
January 12, 2016, 02:58:37 PM
solo use mine from the local node. Speed Antiminer S5
http://prntscr.com/9otqer
Antiminer S1 are solid RC
http://storage2.static.itmages.ru/i/16/0111/h_1452529947_4072649_aaf35ea4df.png
Antiminer U3 works fine.
I use start-pool.bat "bfgminer -o 127.0.0.1:11655 -u xxxxx -p x --http-port = 3333
pause" . What problem do not tell?
http://prntscr.com/9otqer
Antiminer S1 are solid RC
http://storage2.static.itmages.ru/i/16/0111/h_1452529947_4072649_aaf35ea4df.png
Antiminer U3 works fine.
I use start-pool.bat "bfgminer -o 127.0.0.1:11655 -u xxxxx -p x --http-port = 3333
pause" . What problem do not tell?
January 12, 2016, 01:47:52 PM
Try messing with those workarounds in README.ASIC...
January 12, 2016, 01:29:46 PM
January 09, 2016, 05:21:14 PM
It has come to my attention that the 2D-work engine fails to submit shares with GBT servers.
Note that if you are affected, you would most likely notice that you're never getting credit for any shares.
Therefore, since this bug went unreported for so long, I assume nobody is actually trying this particular use case, and as such I deem it to be not a high priority issue.
I will try to get it fixed in the next release at my convenience, unless it actually bothers someone.
- If you only use stratum mining pools, you are NOT affected.
- Otherwise, if you use GBT pools or solo mine with a local node:
- If you use an Avalon2 or newer, you ARE affected.
- If you use the --stratum-port option, you ARE affected.
- If you don't use either of the above, you are NOT affected.
Note that if you are affected, you would most likely notice that you're never getting credit for any shares.
Therefore, since this bug went unreported for so long, I assume nobody is actually trying this particular use case, and as such I deem it to be not a high priority issue.
I will try to get it fixed in the next release at my convenience, unless it actually bothers someone.
January 09, 2016, 02:06:28 PM
Hello :0
I have 6 compac sticks running just fine with the special cgminer
However, bfgmine 5.4.1 has some issue finding them.
1st it didn't find any of them with -S all or -S compac
2nd: I tried a cgminer --benchmark while bfgminer was running and it showed them all. When I quit cgminer, all 6 compac appeared in the still running BFGminer
Now it finds 4, but not all are hashing
here's a log excerpt:
maybe I should try to run bfgminer as SU, but I think it doesn't work better :p
I realise I asked this question before, but now I have 4 devices detected when I had only 3 before.
I have 2 hubs, 3 compac on each.
This is a gigabyte Brix running ubuntu, so no drivers required...
I'd really like to use bfgminer as it can report hash speed correctly and has a more stable /consistent speed tracking.
Thank you.
I have 6 compac sticks running just fine with the special cgminer
However, bfgmine 5.4.1 has some issue finding them.
1st it didn't find any of them with -S all or -S compac
2nd: I tried a cgminer --benchmark while bfgminer was running and it showed them all. When I quit cgminer, all 6 compac appeared in the still running BFGminer
Now it finds 4, but not all are hashing
here's a log excerpt:
Quote
[2016-01-09 20:02:01] Started bfgminer 5.4.1
[2016-01-09 20:02:01] Loaded configuration file /var/www/minera/conf/miner_conf.json
[2016-01-09 20:02:01] Found CBM 0 at /dev/ttyUSB2
[2016-01-09 20:02:01] Found CBM 1 at /dev/ttyUSB3
[2016-01-09 20:02:01] Found CBM 2 at /dev/ttyUSB1
[2016-01-09 20:02:01] Found CBM 3 at /dev/ttyUSB0
[2016-01-09 20:02:21] ModMiner detect: no response to version request from /dev/ttyUSB4
[2016-01-09 20:02:22] ModMiner detect: no response to version request from /dev/ttyUSB5
[2016-01-09 20:02:43] ModMiner detect: no response to version request from /dev/ttyUSB4
[2016-01-09 20:02:43] ModMiner detect: no response to version request from /dev/ttyUSB5
[2016-01-09 20:02:45] Probing for an alive pool
[2016-01-09 20:02:45] Testing pool stratum+tcp://solo.ckpool.org:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://de.ckpool.org:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://solo.ckpool.org:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://solo.ckpool.org:443
[2016-01-09 20:02:45] Testing pool stratum+tcp://us2.bitminter.com:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://mint.bitminter.com:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://eu1.bitminter.com:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://us1.ghash.io:3333
=====stratum check removed =====
[2016-01-09 20:02:48] API running in IP access mode on port 4028
[2016-01-09 20:02:48] CBM 0: Opened /dev/ttyUSB2
[2016-01-09 20:02:48] CBM 1: Opened /dev/ttyUSB3
[2016-01-09 20:02:48] CBM 3: Opened /dev/ttyUSB0
[2016-01-09 20:02:48] CBM 2: Opened /dev/ttyUSB1
[2016-01-09 20:02:48] New best share: 9
[2016-01-09 20:02:49] New best share: 23
[2016-01-09 20:02:50] New best share: 40
[2016-01-09 20:02:57] New best share: 106
[2016-01-09 20:03:01] New best share: 154
[2016-01-09 20:03:02] New best share: 195
[2016-01-09 20:03:05] ModMiner detect: no response to version request from /dev/ttyUSB5
[2016-01-09 20:03:06] ModMiner detect: no response to version request from /dev/ttyUSB4
[2016-01-09 20:03:08] 20s: 6.40 avg:16.52 u:70.40 Gh/s | A:0 R:0+0(none) HW:0/none
[2016-01-09 20:03:14] New best share: 209
[2016-01-09 20:02:01] Loaded configuration file /var/www/minera/conf/miner_conf.json
[2016-01-09 20:02:01] Found CBM 0 at /dev/ttyUSB2
[2016-01-09 20:02:01] Found CBM 1 at /dev/ttyUSB3
[2016-01-09 20:02:01] Found CBM 2 at /dev/ttyUSB1
[2016-01-09 20:02:01] Found CBM 3 at /dev/ttyUSB0
[2016-01-09 20:02:21] ModMiner detect: no response to version request from /dev/ttyUSB4
[2016-01-09 20:02:22] ModMiner detect: no response to version request from /dev/ttyUSB5
[2016-01-09 20:02:43] ModMiner detect: no response to version request from /dev/ttyUSB4
[2016-01-09 20:02:43] ModMiner detect: no response to version request from /dev/ttyUSB5
[2016-01-09 20:02:45] Probing for an alive pool
[2016-01-09 20:02:45] Testing pool stratum+tcp://solo.ckpool.org:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://de.ckpool.org:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://solo.ckpool.org:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://solo.ckpool.org:443
[2016-01-09 20:02:45] Testing pool stratum+tcp://us2.bitminter.com:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://mint.bitminter.com:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://eu1.bitminter.com:3333
[2016-01-09 20:02:45] Testing pool stratum+tcp://us1.ghash.io:3333
=====stratum check removed =====
[2016-01-09 20:02:48] API running in IP access mode on port 4028
[2016-01-09 20:02:48] CBM 0: Opened /dev/ttyUSB2
[2016-01-09 20:02:48] CBM 1: Opened /dev/ttyUSB3
[2016-01-09 20:02:48] CBM 3: Opened /dev/ttyUSB0
[2016-01-09 20:02:48] CBM 2: Opened /dev/ttyUSB1
[2016-01-09 20:02:48] New best share: 9
[2016-01-09 20:02:49] New best share: 23
[2016-01-09 20:02:50] New best share: 40
[2016-01-09 20:02:57] New best share: 106
[2016-01-09 20:03:01] New best share: 154
[2016-01-09 20:03:02] New best share: 195
[2016-01-09 20:03:05] ModMiner detect: no response to version request from /dev/ttyUSB5
[2016-01-09 20:03:06] ModMiner detect: no response to version request from /dev/ttyUSB4
[2016-01-09 20:03:08] 20s: 6.40 avg:16.52 u:70.40 Gh/s | A:0 R:0+0(none) HW:0/none
[2016-01-09 20:03:14] New best share: 209
maybe I should try to run bfgminer as SU, but I think it doesn't work better :p
I realise I asked this question before, but now I have 4 devices detected when I had only 3 before.
I have 2 hubs, 3 compac on each.
This is a gigabyte Brix running ubuntu, so no drivers required...
I'd really like to use bfgminer as it can report hash speed correctly and has a more stable /consistent speed tracking.
Thank you.
January 08, 2016, 03:44:30 PM
Latest version is 5.4.1, have you tried it ?
Sorry but it is the same... the miner failure?
Hello THx for your answer,
i have only Bi*Fury and RedFury at the (test config) with the bfgminer...
regards
January 08, 2016, 11:16:45 AM
Latest version is 5.4.1, have you tried it ?
Sorry but it is the same... the miner failure?
January 08, 2016, 10:35:16 AM
January 08, 2016, 09:59:28 AM
Latest version is 5.4.1, have you tried it ?
Sorry but it is the same... the miner failure?
Quote
bfgminer version 5.4.1 - Started: [2016-01-08 15:55:21] - [ 0 days 00:02:41]
[M]anage devices [P]ool management Settings [D]isplay options [H]elp [Q]uit
Pools: 2 (0,2) Diff:87-1k + LU:[15:57:25]
Block: ...ae1dac2d596225fd Diff:1.8M (12.89T) Started: [15:57:25] I:?
ST:14 F:0 NB:3 AS:0 BW:[ 71/ 18 B/s] E:172.56 BS:995
9/11 19.1C | 29.64/28.05/27.84Gh/s | A:14 R:0+0(none) HW:499/ 33%
-----------------------------------------------------------------------------------------------------
BIF 0: 19.1C | 6.45/ 5.20/ 5.20Gh/s | A: 4 R:0+0(none) HW: 12/5.8%
BIF 1: 18.4C | 5.73/ 5.31/ 5.31Gh/s | A: 3 R:0+0(none) HW: 18/8.3%
BPM 0: | 2.31/ 2.29/ 2.47Gh/s | A: 0 R:0+0(none) HW: 72/ 44%
BPM 1: | 2.76/ 2.74/ 2.60Gh/s | A: 0 R:0+0(none) HW: 88/ 47%
BPM 2: | 2.61/ 2.59/ 1.94Gh/s | A: 1 R:0+0(none) HW:108/ 60%
BPM 3: | 2.16/ 2.14/ 2.23Gh/s | A: 3 R:0+0(none) HW: 68/ 45%
BPM 4: | 2.64/ 2.61/ 2.07Gh/s | A: 2 R:0+0(none) HW: 67/ 46%
BPM 5: | 2.59/ 2.57/ 3.27Gh/s | A: 0 R:0+0(none) HW: 37/ 23%
BPM 6: | 2.67/ 2.65/ 2.65Gh/s | A: 1 R:0+0(none) HW: 29/ 22%
-----------------------------------------------------------------------------------------------------
[2016-01-08 15:57:19] BIF 1: Unknown job id: job 12a 568fce57 0
[2016-01-08 15:57:19] BIF 1: Unknown job id: job 132 568fce59 1
[2016-01-08 15:57:21] BIF 0: Unknown job id: job 1ab 568fce58 1
[2016-01-08 15:57:22] BIF 0: Unknown job id: job 1ac 568fce5a 0
[2016-01-08 15:57:24] Accepted 02d08dfa BPM 2 pool 2 Diff 90/87
[2016-01-08 15:57:25] Stratum from pool 2 detected new block
[2016-01-08 15:57:26] BIF 1: Unknown job id: job 150 568fce5d 0
[2016-01-08 15:57:27] Pool 2 stale share detected, submitting as user requested
[2016-01-08 15:57:27] Accepted 0041dbb2 BPM 3 pool 2 Diff 995/87
[2016-01-08 15:57:32] Accepted 01db49d3 BIF 0a pool 2 Diff 137/87
[2016-01-08 15:57:34] Accepted 02937a72 BPM 4 pool 2 Diff 99/87
[2016-01-08 15:57:55] BIF 1: Unknown job id: job 1af 568fce7c 0
[2016-01-08 15:57:56] Accepted 00543ece BIF 1b pool 2 Diff 777/87
[M]anage devices [P]ool management Settings [D]isplay options [H]elp [Q]uit
Pools: 2 (0,2) Diff:87-1k + LU:[15:57:25]
Block: ...ae1dac2d596225fd Diff:1.8M (12.89T) Started: [15:57:25] I:?
ST:14 F:0 NB:3 AS:0 BW:[ 71/ 18 B/s] E:172.56 BS:995
9/11 19.1C | 29.64/28.05/27.84Gh/s | A:14 R:0+0(none) HW:499/ 33%
-----------------------------------------------------------------------------------------------------
BIF 0: 19.1C | 6.45/ 5.20/ 5.20Gh/s | A: 4 R:0+0(none) HW: 12/5.8%
BIF 1: 18.4C | 5.73/ 5.31/ 5.31Gh/s | A: 3 R:0+0(none) HW: 18/8.3%
BPM 0: | 2.31/ 2.29/ 2.47Gh/s | A: 0 R:0+0(none) HW: 72/ 44%
BPM 1: | 2.76/ 2.74/ 2.60Gh/s | A: 0 R:0+0(none) HW: 88/ 47%
BPM 2: | 2.61/ 2.59/ 1.94Gh/s | A: 1 R:0+0(none) HW:108/ 60%
BPM 3: | 2.16/ 2.14/ 2.23Gh/s | A: 3 R:0+0(none) HW: 68/ 45%
BPM 4: | 2.64/ 2.61/ 2.07Gh/s | A: 2 R:0+0(none) HW: 67/ 46%
BPM 5: | 2.59/ 2.57/ 3.27Gh/s | A: 0 R:0+0(none) HW: 37/ 23%
BPM 6: | 2.67/ 2.65/ 2.65Gh/s | A: 1 R:0+0(none) HW: 29/ 22%
-----------------------------------------------------------------------------------------------------
[2016-01-08 15:57:19] BIF 1: Unknown job id: job 12a 568fce57 0
[2016-01-08 15:57:19] BIF 1: Unknown job id: job 132 568fce59 1
[2016-01-08 15:57:21] BIF 0: Unknown job id: job 1ab 568fce58 1
[2016-01-08 15:57:22] BIF 0: Unknown job id: job 1ac 568fce5a 0
[2016-01-08 15:57:24] Accepted 02d08dfa BPM 2 pool 2 Diff 90/87
[2016-01-08 15:57:25] Stratum from pool 2 detected new block
[2016-01-08 15:57:26] BIF 1: Unknown job id: job 150 568fce5d 0
[2016-01-08 15:57:27] Pool 2 stale share detected, submitting as user requested
[2016-01-08 15:57:27] Accepted 0041dbb2 BPM 3 pool 2 Diff 995/87
[2016-01-08 15:57:32] Accepted 01db49d3 BIF 0a pool 2 Diff 137/87
[2016-01-08 15:57:34] Accepted 02937a72 BPM 4 pool 2 Diff 99/87
[2016-01-08 15:57:55] BIF 1: Unknown job id: job 1af 568fce7c 0
[2016-01-08 15:57:56] Accepted 00543ece BIF 1b pool 2 Diff 777/87
??
January 08, 2016, 09:20:22 AM
Latest version is 5.4.1, have you tried it ?
Ok i install the last bfgminer Version 5.4.1 and i will test
January 08, 2016, 06:17:26 AM
Latest version is 5.4.1, have you tried it ?
Jump to: