Topic: BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64 - page 55. (Read 834576 times)
January 05, 2015, 05:48:15 PM
Sweet, thanx!
January 04, 2015, 03:01:37 AM
How can you underclock the Monarch?
--set bitforce:_cmd1=F??The first "?" is a frequency index, from 1 to F (hexadecimal).
Due to dynamic clocking in the MCU, there are no set frequency numbers.
The second "?" is either "X" for normal speed, or "D" for double speed.
You can also use --set bitforce:_cmd1=V?X to control voltage.
In this case, the "?" is one of:
- 0 = 0.54 V
- 1 = 0.55 V
- 2 = 0.56 V
- 3 = 0.58 V
- 4 = 0.6 V
- 5 = 0.62 V
- 6 = 0.63 V
- 7 = 0.643 V
- 8 = 0.65 V
- 9 = 0.662 V
- A = 0.67 V
- B = 0.68 V
- C = 0.7 V
- D = 0.72 V
- E = 0.73 V
- F = 0.75 V
January 04, 2015, 01:18:28 AM
How can you underclock the Monarch?
[/quote
This would be a great question for Lightfoot
[/quote
This would be a great question for Lightfoot
January 03, 2015, 07:09:58 PM
BFGMiner closes after I enter the password.
January 01, 2015, 08:00:50 AM
How can you underclock the Monarch?
December 31, 2014, 04:00:47 PM
This is my first post on bitcointalk. Thanks for your work on BFGminer! Also, thanks to Bitcoin Talk for creating such a knowledge rich forum! I've been reading and following many threads. Cryptocurrency is very interesting!
A little background:
I'm currently trying to setup a single Antminer U2 USB on an ASUS RT-N66U. I know I will never achieve an ROI, but my router is always on and I want to contribute to the bitcoin community and mine the blockchain.
This router has Shibby's latest TomatoUSB firmware + Entware + OPKG package manager. However, TomatoUSB, Entware, and OPKG do not provide the kernel driver I need for the Antminer U2 (kmod-usb-serial-cp210x.)
I believe I would have to compile these kernel drivers for Entware or request to have them built into TomatoUSB?
The big question:
Would someone be willing to compile the cp210x.ko for the Tomatousb 2.6.22.19 kernel or an .ipk for kmod-usb-serial & kmod-usb-serial-cp210x for Entware with MIPS architecture? I believe if I had this kernel driver or package I could insmod it or install them using OPKG and mine away!
All input is welcome!
Happy 2015!
A little background:
I'm currently trying to setup a single Antminer U2 USB on an ASUS RT-N66U. I know I will never achieve an ROI, but my router is always on and I want to contribute to the bitcoin community and mine the blockchain.
This router has Shibby's latest TomatoUSB firmware + Entware + OPKG package manager. However, TomatoUSB, Entware, and OPKG do not provide the kernel driver I need for the Antminer U2 (kmod-usb-serial-cp210x.)
I believe I would have to compile these kernel drivers for Entware or request to have them built into TomatoUSB?
The big question:
Would someone be willing to compile the cp210x.ko for the Tomatousb 2.6.22.19 kernel or an .ipk for kmod-usb-serial & kmod-usb-serial-cp210x for Entware with MIPS architecture? I believe if I had this kernel driver or package I could insmod it or install them using OPKG and mine away!
All input is welcome!
Happy 2015!
December 31, 2014, 03:52:06 PM
What's the proper syntax for BFGMiner to clock a GridSeed five blade up to the correct speed? It should be set to 800 if I'm not mistaken to get 340KH/s. I'm only getting about 200KH/s so I'm assuming it defaults to a 600 setting?
Code:
--set gsd:clock=800
I use 835 myself.
Thanks, works perfect.
December 31, 2014, 08:28:42 AM
Hi,
I've got number of the Avalon Nano (https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428) and have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.
I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.
Would be appreciate for any help and hints!
PS I'm on linux (if it may concern...)
I have a similar issue but with Scrypt on multipools (Clevermining, in this case). Nwools noted that it's a known issue with BFGminer that the hashrate will drop as the multipool switches blockchains. I'm using a mix of Gridseed Orbs and a Blizzard. I'm not sure if this has been fixed in version 5.0. I've got number of the Avalon Nano (https://bitcointalk.org/index.php?topic=779612.msg8841428;topicseen#msg8841428) and have successfuly downloaded and compiled fresh version of bfgminer and run it. It works fine for couple of minutes, then it starts to get slower and finally stall at all. Restarting the bfgminer helps but for same couple of minutes.
I've got configuration here: https://en.bitcoin.it/wiki/Avalon_nano#BFGMiner
here is a log (last half of that): http://pastebin.com/EQAj58HH
The obvious solution -- to make the simple script that restart BFGMiner each 2 minutes, but it's doesn't looks good.
Would be appreciate for any help and hints!
PS I'm on linux (if it may concern...)
Are you using a multipool, Dimoza? If yes, that might be issue.
actually, not. I use classical stratum "single" pool.
But... concerning to your issue, does your hashrate drops to 0 or just getting relatively lower? Cause mine drops to zero.
(and I was trying it on ver 5.0 as well, by the way)
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
December 31, 2014, 04:36:20 AM
What's the proper syntax for BFGMiner to clock a GridSeed five blade up to the correct speed? It should be set to 800 if I'm not mistaken to get 340KH/s. I'm only getting about 200KH/s so I'm assuming it defaults to a 600 setting?
Code:
--set gsd:clock=800
I use 835 myself.
Me too! 835 seems a stable one but 800 is more stable.
~~MZ~~
December 31, 2014, 04:15:49 AM
could someone tell me if the parameter HW which stay always in the same condition (HW: 0/none) is a symptom that my gridseed have some hardware problems or is it just a settings/software error? 
December 30, 2014, 05:28:59 PM
What's the proper syntax for BFGMiner to clock a GridSeed five blade up to the correct speed? It should be set to 800 if I'm not mistaken to get 340KH/s. I'm only getting about 200KH/s so I'm assuming it defaults to a 600 setting?
Code:
--set gsd:clock=800
I use 835 myself.
December 30, 2014, 05:20:48 PM
What's the proper syntax for BFGMiner to clock a GridSeed five blade up to the correct speed? It should be set to 800 if I'm not mistaken to get 340KH/s. I'm only getting about 200KH/s so I'm assuming it defaults to a 600 setting?
December 30, 2014, 10:18:30 AM
no suitable long-poll found for pool
60 seconds later declared sick (after taking the first pool out)
Turned longpoll off. Still going sick
is my wallet setup
60 seconds later declared sick (after taking the first pool out)
Turned longpoll off. Still going sick
Code:
server=1
listen=1
rpcuser=draco
rpcpassword=x
addnode=54.194.99.126
daemon=1
rpcallowip=localhost
rpcport=3333
addnode=192.168.1.116
addnode=192.99.111.227
addnode=198.50.151.86
addnode=5.196.226.54
addnode=5.196.29.188
is my wallet setup
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
December 30, 2014, 10:13:51 AM
well, no clue then lol. When I connect to westhash I have no issues out of it. using the same settings to connect to local wallet I get the errors so that is what I thought it was.
Try removing first pool from the config file.
~~MZ~~
December 30, 2014, 10:08:30 AM
well, no clue then lol. When I connect to westhash I have no issues out of it. using the same settings to connect to local wallet I get the errors so that is what I thought it was.
December 30, 2014, 10:05:51 AM
the problem is if BFG does not detect "shares" being accepted it throws up an idle error after 60 seconds.
No, it doesn't. That error means the device has stopped responding entirely. December 30, 2014, 10:04:39 AM
still throws up an error Idle for more than 60 seconds, declaring SICK
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
December 30, 2014, 09:55:49 AM
Code:
{
"pools" : [
{
"url" : "http://localhost:3333/",
"user" : "draco",
"pass" : "x",
"pool-priority" : "0"
},
{
"url" : "http://127.0.0.1:3333",
"user" : "draco",
"pass" : "x",
"pool-priority" : "1"
}
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"expiry-lp" : "3600",
"failover-switch-delay" : "300",
"log" : "20",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"no-show-processors" : true,
"no-show-procs" : true,
"no-unicode" : true,
"queue" : "1",
"quiet-work-updates" : true,
"quiet-work-update" : true,
"scan-time" : "60",
"scrypt" : true,
"skip-security-checks" : "0",
"submit-stale" : true,
"temp-hysteresis" : "3",
"shares" : 0,
"rotate" : "1",
"kernel-path" : "C:\\Program Files\\BFGMiner\\/share/bfgminer",
"scan" : [
"noauto",
"zeusminer:\\\\.\\COM3"
],
"device" : [
"zeusminer@\\\\.\\COM3"
]
}
The miner connects to the wallet and says the pool is alive
Try
Code:
{
"pools" : [
{
"url" : "http://localhost:3333/",
"user" : "draco",
"pass" : "x",
"pool-priority" : "0"
},
{
"url" : "http://127.0.0.1:3333",
"user" : "draco",
"pass" : "x",
"pool-priority" : "1"
}
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "300",
"expiry-lp" : "3600",
"failover-switch-delay" : "300",
"log" : "20",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"no-show-processors" : true,
"no-show-procs" : true,
"no-unicode" : true,
"queue" : "1",
"quiet-work-updates" : true,
"quiet-work-update" : true,
"scan-time" : "300",
"scrypt" : true,
"skip-security-checks" : "0",
"submit-stale" : true,
"temp-hysteresis" : "3",
"shares" : 0,
"rotate" : "1",
"kernel-path" : "C:\\Program Files\\BFGMiner\\/share/bfgminer",
"scan" : [
"noauto",
"zeusminer:\\\\.\\COM3"
],
"device" : [
"zeusminer@\\\\.\\COM3"
]
}
~~MZ~~
December 30, 2014, 09:43:11 AM
Code:
{
"pools" : [
{
"url" : "http://localhost:3333/",
"user" : "draco",
"pass" : "x",
"pool-priority" : "0"
},
{
"url" : "http://127.0.0.1:3333",
"user" : "draco",
"pass" : "x",
"pool-priority" : "1"
}
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"expiry-lp" : "3600",
"failover-switch-delay" : "300",
"log" : "20",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"no-show-processors" : true,
"no-show-procs" : true,
"no-unicode" : true,
"queue" : "1",
"quiet-work-updates" : true,
"quiet-work-update" : true,
"scan-time" : "60",
"scrypt" : true,
"skip-security-checks" : "0",
"submit-stale" : true,
"temp-hysteresis" : "3",
"shares" : 0,
"rotate" : "1",
"kernel-path" : "C:\\Program Files\\BFGMiner\\/share/bfgminer",
"scan" : [
"noauto",
"zeusminer:\\\\.\\COM3"
],
"device" : [
"zeusminer@\\\\.\\COM3"
]
}
The miner connects to the wallet and says the pool is alive
hero member
Activity: 560
Merit: 509
I prefer Zakir over Muhammed when mentioning me!
December 30, 2014, 09:41:09 AM
that isn't the problem. the problem is if BFG does not detect "shares" being accepted it throws up an idle error after 60 seconds. It found a block last night (its my own coin and I am trying to get the blockchain moving again) but it always wants to restart because of the idle. I am wanting to turn that feature off
Your miner configuration please? Please post it here.
~~MZ~~
Jump to: