Topic: BFL Little Single 30GH/s Firmware upgrade/tweaks/overclock - page 2. (Read 16066 times)
could get it work only with BFGminer, anyone can share the cgminer comand line?
There's 2 temps in BFGMiner,the first (I'm assuming) is ambient temp.The second is the chip temp.
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
Honestly I am so damn lazy that I am just mining through Easyminer (private pool of course) with BFG. Temp was just easyminer output.
Easyminer is only showing ambient temps
Well thats not good!! Try BFGMiner by itself & let us know what your REAL temp is 
Easyminer blows. Doesn't even show correct hash rate in graph, only in BFGminer logs.
BFGMiner was really easy to get going,as I have BEs running too,just follow these instructions
https://www.btcguild.com/index.php?page=support§ion=blockerupter
Heres a sample "target" shortcut:
"C:\Users\pcname\wherever\Eruptor stuff\bfgminer-3.1.1-win64\bfgminer-3.1.1-win64\bfgminer.exe" -o http://stratum.bitcoin.cz:3333 -u username -p password -G -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100
is it much harder to get it work on cgminer?
or LS working only with BFG ?
For me BFGMiner was easier
BFGMiner uses FDTI drivers,which work with more devices,IMO,instead of Zadig ones.
https://bitcointalksearch.org/topic/old-bfgminer-3100-modular-asicfpga-gbtstrtm-rpc-maclnxw64-antu1-drb-168174
You can use a bat file like this intead:
Here is a semi blank batch file for bfgminer
1)Copy the text to notepad and modify what you need then save it as bfgminer.bat.
2)Put it in your cgminer folder and & double ckick to run it.
bfgminer -o http://poolurl:port -u user -p pass
There's more "commands" you can add,even though this link is for cgminer they still work:
https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
Scroll down to EXECUTIVE SUMMARY ON USAGE
I have gpus in my rig already and they are mining scrypt.
So i guess that would be minimum to write -nogpu comand aswell. Can anyone put the piece of code here that they are using with they LS ? In cgminer and BFGminer. Currently i am using only cgminer.
Also does Cgminer uses more CPU resources? Thanks for answers. I just want to run that LS as soon as i get it.
Does anyone tryed to put them under cold like someone was doing with japalenos to get low starting temp for greater performance?
P.S. i would want to configure and see .bat file only for little singe, not using gpus
P.S.S. Would these lines could work:
CGminer:
cgminer-nogpu.exe -o http://poolurl:port -u user -p pass --enable-bflsc
BFGminer:
bfgminer -o http://poolurl:port -u user -p pass
There's 2 temps in BFGMiner,the first (I'm assuming) is ambient temp.The second is the chip temp.
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
Honestly I am so damn lazy that I am just mining through Easyminer (private pool of course) with BFG. Temp was just easyminer output.
Easyminer is only showing ambient temps
Well thats not good!! Try BFGMiner by itself & let us know what your REAL temp is Easyminer blows. Doesn't even show correct hash rate in graph, only in BFGminer logs.
BFGMiner was really easy to get going,as I have BEs running too,just follow these instructions
https://www.btcguild.com/index.php?page=support§ion=blockerupter
Heres a sample "target" shortcut:
"C:\Users\pcname\wherever\Eruptor stuff\bfgminer-3.1.1-win64\bfgminer-3.1.1-win64\bfgminer.exe" -o http://stratum.bitcoin.cz:3333 -u username -p password -G -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100
is it much harder to get it work on cgminer?
or LS working only with BFG ?
For me BFGMiner was easier
BFGMiner uses FDTI drivers,which work with more devices,IMO,instead of Zadig ones.
https://bitcointalksearch.org/topic/old-bfgminer-3100-modular-asicfpga-gbtstrtm-rpc-maclnxw64-antu1-drb-168174
You can use a bat file like this intead:
Here is a semi blank batch file for bfgminer
1)Copy the text to notepad and modify what you need then save it as bfgminer.bat.
2)Put it in your cgminer folder and & double ckick to run it.
bfgminer -o http://poolurl:port -u user -p pass
There's more "commands" you can add,even though this link is for cgminer they still work:
https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402
Scroll down to EXECUTIVE SUMMARY ON USAGE
I too am interested since mine just came in today. Anyone have suggestions for quieter, but still efficient fans? This thing is louder than a 5970...
I mounted my board in an open Mini ITX case and replaced the stock fans with silenx fans (one 120mm and one 100mm). The system has been running virtually silent @30 GH/s for the last 2 months without issues at ~68C. The power brick is now the noisiest component in my setup. http://www.silenx.com/quiet.fans.asp
There's 2 temps in BFGMiner,the first (I'm assuming) is ambient temp.The second is the chip temp.
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
Honestly I am so damn lazy that I am just mining through Easyminer (private pool of course) with BFG. Temp was just easyminer output.
Easyminer is only showing ambient temps
Well thats not good!! Try BFGMiner by itself & let us know what your REAL temp is Easyminer blows. Doesn't even show correct hash rate in graph, only in BFGminer logs.
BFGMiner was really easy to get going,as I have BEs running too,just follow these instructions
https://www.btcguild.com/index.php?page=support§ion=blockerupter
Heres a sample "target" shortcut:
"C:\Users\pcname\wherever\Eruptor stuff\bfgminer-3.1.1-win64\bfgminer-3.1.1-win64\bfgminer.exe" -o http://stratum.bitcoin.cz:3333 -u username -p password -G -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100
is it much harder to get it work on cgminer?
or LS working only with BFG ?
So no tweaks and firmware optimizations for ls yet?
does trick with the freezer works on little single?
does trick with the freezer works on little single?
I'd imagine it would, the firmware they run is virtually the same it seems.
I'd like to hear if anyone attempts to reflash one the way I reflashed my jalapenos
So no tweaks and firmware optimizations for ls yet?
does trick with the freezer works on little single?
does trick with the freezer works on little single?
Hi to all.
I am looking for this kind of information (how to oc ls) too.
BTW maybe anyone can tell how long with standart shipping order from BFL comes to Europe? I have been noticed that at 17. august it has been shipped, here is the tracking number:
https://tools.usps.com/go/TrackConfirmAction.action?tLabels=CJ422490240US
but it seems not to go further, sometimes that happens when its already outside of USA, any have experience with Little singe orders to Europe? Thanks
I am looking for this kind of information (how to oc ls) too.
BTW maybe anyone can tell how long with standart shipping order from BFL comes to Europe? I have been noticed that at 17. august it has been shipped, here is the tracking number:
https://tools.usps.com/go/TrackConfirmAction.action?tLabels=CJ422490240US
but it seems not to go further, sometimes that happens when its already outside of USA, any have experience with Little singe orders to Europe? Thanks
Might want to make some phonecalls or check your mail... I saw this on track and trace for Latvia:
Latvijas Pasts: CJ422490240US
Track at official postal site
Date Zipcode Location Event Weight Additional
20.08.2013 00:00 Šķirošanas Vieta - Rīga Arrival at international place of exchange
20.08.2013 00:00 Muitas Iestāde Into customs
21.08.2013 00:00 Šķirošanas Vieta - Rīga Arrival at international place of exchange
21.08.2013 00:00 Šķirošanas Vieta - Rīga Sent to delivery office
22.08.2013 00:00 PP-4601 Pn Rēzekne - 1 Arrival at delivery point
22.08.2013 00:00 PP-4601 Pn Rēzekne - 1 Recipient advised to pick up the item
Thanks, will call to post office, too bad its not a working day today.
I think there like 45 cfm ... I wouldn't worry bout it too much if you leave the covers off the temps will go down.
I wouldn't worry bout it too much if you leave the covers off the temps will go down. 
Swapped out the fans with some old 120mm coolermaster fans. It is so quite now. Temps range from 68 to 72c.
How much CFM do they move? I have a bunch of extra 120mm fans but want to make sure they wont make it hotter than it already is, but I really cant stant the whine of the stock fans.
Swapped out the fans with some old 120mm coolermaster fans. It is so quite now. Temps range from 68 to 72c.
has anyone check on the engines of the LS using java API stats for cgminer? Quite interested to know the info there....
Hi to all.
I am looking for this kind of information (how to oc ls) too.
BTW maybe anyone can tell how long with standart shipping order from BFL comes to Europe? I have been noticed that at 17. august it has been shipped, here is the tracking number:
https://tools.usps.com/go/TrackConfirmAction.action?tLabels=CJ422490240US
but it seems not to go further, sometimes that happens when its already outside of USA, any have experience with Little singe orders to Europe? Thanks
I am looking for this kind of information (how to oc ls) too.
BTW maybe anyone can tell how long with standart shipping order from BFL comes to Europe? I have been noticed that at 17. august it has been shipped, here is the tracking number:
https://tools.usps.com/go/TrackConfirmAction.action?tLabels=CJ422490240US
but it seems not to go further, sometimes that happens when its already outside of USA, any have experience with Little singe orders to Europe? Thanks
Might want to make some phonecalls or check your mail... I saw this on track and trace for Latvia:
Latvijas Pasts: CJ422490240US
Track at official postal site
Date Zipcode Location Event Weight Additional
20.08.2013 00:00 Šķirošanas Vieta - Rīga Arrival at international place of exchange
20.08.2013 00:00 Muitas Iestāde Into customs
21.08.2013 00:00 Šķirošanas Vieta - Rīga Arrival at international place of exchange
21.08.2013 00:00 Šķirošanas Vieta - Rīga Sent to delivery office
22.08.2013 00:00 PP-4601 Pn Rēzekne - 1 Arrival at delivery point
22.08.2013 00:00 PP-4601 Pn Rēzekne - 1 Recipient advised to pick up the item
Hi to all.
I am looking for this kind of information (how to oc ls) too.
BTW maybe anyone can tell how long with standart shipping order from BFL comes to Europe? I have been noticed that at 17. august it has been shipped, here is the tracking number:
https://tools.usps.com/go/TrackConfirmAction.action?tLabels=CJ422490240US
but it seems not to go further, sometimes that happens when its already outside of USA, any have experience with Little singe orders to Europe? Thanks
I am looking for this kind of information (how to oc ls) too.
BTW maybe anyone can tell how long with standart shipping order from BFL comes to Europe? I have been noticed that at 17. august it has been shipped, here is the tracking number:
https://tools.usps.com/go/TrackConfirmAction.action?tLabels=CJ422490240US
but it seems not to go further, sometimes that happens when its already outside of USA, any have experience with Little singe orders to Europe? Thanks
I reckon any overclocking would mean playing with firmware... Try firing up a serial console to the device and try the ZCX command to get full stats from them. Maybe have a few people start pasting here so we can compare 
Anyone replaced the fans on one of these? The noise is killing me.
There's 2 temps in BFGMiner,the first (I'm assuming) is ambient temp.The second is the chip temp.
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
Honestly I am so damn lazy that I am just mining through Easyminer (private pool of course) with BFG. Temp was just easyminer output.
Easyminer is only showing ambient temps
Well thats not good!! Try BFGMiner by itself & let us know what your REAL temp is Easyminer blows. Doesn't even show correct hash rate in graph, only in BFGminer logs.
BFGMiner was really easy to get going,as I have BEs running too,just follow these instructions
https://www.btcguild.com/index.php?page=support§ion=blockerupter
Heres a sample "target" shortcut:
"C:\Users\pcname\wherever\Eruptor stuff\bfgminer-3.1.1-win64\bfgminer-3.1.1-win64\bfgminer.exe" -o http://stratum.bitcoin.cz:3333 -u username -p password -G -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100
Awesome, thx. I'm not technically stupid, just don't have time to do all the research
Much obliged.
There's 2 temps in BFGMiner,the first (I'm assuming) is ambient temp.The second is the chip temp.
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
Honestly I am so damn lazy that I am just mining through Easyminer (private pool of course) with BFG. Temp was just easyminer output.
Easyminer is only showing ambient temps
Well thats not good!! Try BFGMiner by itself & let us know what your REAL temp is Easyminer blows. Doesn't even show correct hash rate in graph, only in BFGminer logs.
BFGMiner was really easy to get going,as I have BEs running too,just follow these instructions
https://www.btcguild.com/index.php?page=support§ion=blockerupter
Heres a sample "target" shortcut:
"C:\Users\pcname\wherever\Eruptor stuff\bfgminer-3.1.1-win64\bfgminer-3.1.1-win64\bfgminer.exe" -o http://stratum.bitcoin.cz:3333 -u username -p password -G -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100
There's 2 temps in BFGMiner,the first (I'm assuming) is ambient temp.The second is the chip temp.
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
My 30GH'er runs 69C also,so I don't think your reading the correct temp TheSwede75.
I'm intrested in OC'in as well,only if I can get my temps down first,I'll be watching
Honestly I am so damn lazy that I am just mining through Easyminer (private pool of course) with BFG. Temp was just easyminer output.
Easyminer is only showing ambient temps
Well thats not good!! Try BFGMiner by itself & let us know what your REAL temp is Easyminer blows. Doesn't even show correct hash rate in graph, only in BFGminer logs.
The first week my unit refused to go higher then 25GH, tried everything cgminer, bfgminer, easyminer.
Now I'm using minepeon (raspberry pi + cgminer) and it's up to 27GH @ 53C
Now I'm using minepeon (raspberry pi + cgminer) and it's up to 27GH @ 53C
Jump to: