Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 15. (Read 243376 times)

Pope Francis/Full name
Jorge Mario Bergoglio

What is the Popes last name?:  What to write here when registering

Is there an easy to figure out RAC to BBP payout ratio. If I have this much RAC, I should expect this much BBP based on the ratio. Today seems to be about 0.5x. 1 RAC gives 0.5 BBP assuming you have full stake.

I wrote instructions on how to upgrade to BiblePay 1.5.0.7 mandatory:

https://whitewalr.us/2020/bbp-1507-mandatory.html

There's a PDF version here to follow as a printout:

https://pdfhost.io/v/VV3rHSOdz_How_do_I_perform_a_mandatory_upgrade_to_BiblePay_1507.pdf

You can get 50% match by using GlobalGiving for CameroonONE



You can also give via cryptocurrency, Venmo, etc but this might be a more powerful way to give.

I will probably disallow miners a few hours before the cut over height.

*** NEW RANDOMX GIVEAWAY FOR NEW RANDOMX USERS ***

https://forum.biblepay.org/index.php?topic=503.msg7138#msg7138


Feel free to promote.  I believe we can do this for the first 150 new RX miners.

We also have a new randomx faucet coming online right before the cutover height, that requires an account to be activated on forum.biblepay.org.

** RANDOMX POOLS - UPGRADE INSTRUCTIONS FOR POOL OPERATORS **


If you are running a BiblePay POBH pool and want to upgrade it to RandomX, please follow the normal instructions first:
1.  Before doing this, be sure not to clear the redis database, otherwise you will lose all your outgoing payments (IE you will short the miners for the next 120 blocks). 
2.  Upgrade the biblepay-qt or biblepayd server to the rx version.
3.  In this document:
https://github.com/biblepay/node-open-mining-portal/blob/master/Deploy%20a%20Nomp%20BiblePay%20Pool.txt
follow the "Upgrading the Pool" section first to upgrade the pool code.
Once you do this, POBH will never work again and the pool will be RandomX only (so, it would be a good idea to do this when you are ready to retire POBH).
In the case of rx.biblepay.org, Im going to leave the old pool run until it pays everyone their latent owed balances, and start a new parallel pool for rx.  In other cases you may want to upgrade a few hours before the cutover height.  The pool will still pay the old balances out in 120 blocks.

4.  In this document:
https://github.com/biblepay/node-open-mining-portal/blob/master/Deploy%20a%20Nomp%20BiblePay%20Pool.txt
Find the section "RandomX Upgrade Information", and change the keys and values in biblepay.json and config.json that suit your pool per the instructions.
Your new pool monero address should appear on the front page of the pools website in the lower left, and, this will let everyone see how much each pool collects per month for orphan-charity.

Welcome back!  It is always good to have a stronger community.

So - although in the future, we may only offer pool mining (this would specifically be when we see hackers trying to circumvent the 10% tithe by solo mining), but in the mean time, it is possible to solo mine during this startup phase (with randomx).  But note that my personal feelings are everyone will want to pool mine anyway, to get the dual hash rewards (who would want to earn half, because when solo mining you cannot earn XMR, but only BBP).

This should get you started with randomx mining - see the xmrig part.  We are working on bringing up the pool at rx.biblepay.org later today (I don't want to open it too early because I don't want people hashing empty hashes before the cutover height) height 184675:

https://wiki.biblepay.org/Upgrade_to_RandomX

Hi -


   e.push_back(Pair("Step 1", "Log into your WCG account at 'worldcommunitygrid.org' with your WCG E-mail address and WCG password."));
   e.push_back(Pair("Step 2", "Click Settings | My Profile.  Record your 'Username' and 'Verification Code' and your 'CPID' (Cross-Project-ID)."));
   e.push_back(Pair("Step 3", "Click Settings | Data Sharing.  Ensure the 'Display my Data' radio button is selected.  Click Save. "));
   e.push_back(Pair("Step 4", "Click My Contribution | My Team.  If you are not part of Team 'BIBLE PAY' click Join Team | Search | Bible Pay | Select Bible Pay | Click Join Team | Save."));
   e.push_back(Pair("Step 5", "NOTE: After choosing your team, and starting your research, please give WCG 24 hours for the CPID to propagate into " + CURRENCY_TICKER + ".  In the mean time you can start Boinc research - and ensure the computer is performing WCG tasks. "));
   e.push_back(Pair("Step 6", "From our RPC console, type, exec associate your_username your_verification_code"));
   e.push_back(Pair("Step 7", "Wait for 5 blocks to pass.  Then type 'exec rac' again, and see if you are linked!  "));
   e.push_back(Pair("Step 8", "Once you are linked you will receive daily rewards.  Please read about our minimum stake requirements per RAC here: wiki." + DOMAIN_NAME + "/PODC"));



So in exec associate , you should type the "your_wcg_username" first, then "your_verification_code" second.  To get the Verification Code, follow step 1 & 2 from above ^.
(Note: The verification code is from the wcg account settings above, it is different than your CPID).

Thanks...

Additional 1st Quarter commercial for BBP - RandomX (short version):

https://san.biblepay.org/Media/BiblePay_Commercial_March_2020.mov

So does this mean moving forward all mining is pool mining or can the external miner solo mine also. Sorry late to the game here but have been helping my brother's doctor office get the supplies they need to be able to fight this wonderful virus that is going on. If anyone has a link on how to both Solo and Pool mine that would be awesome as I am only back at my house for another 24 hours or so before going to get more necessary supplies. Thanks

exec associate _Andrei55 _--------------------------- true Here what you need to enter--1.Verification Code  2.Cross-Project Id  First or second

A)
Could you please provide the link that you downloaded that from - and does the error occur when you first execute the installer?
EDIT: I just upgraded my home windows node without a problem - although remember everyone to move your folder to %appdata%\biblepay when doing this upgrade.

B)
You can still solo mine after the next mandatory height, using the core wallet, but it is vehemently unprofitable because it is 40* slower than xmrig.
For all intents and purposes people will need to mine with xmrig-bbp after that height:
https://wiki.biblepay.org/Upgrade_to_RandomX

I see you joined 21 March 2020. You should try again soon and your name should be recognized.

PoDC setup is here:
https://wiki.biblepay.org/PODC_Setup

Join soon so you can be eligible for 1M BBP giveaway at end of Mar 2020.

What is your current RAC at WCG and how long has it been since you reported results? Also, how long has your account been created at WCG?

14:03:48

exec associate WCG_Andrei55 WCG_3d926731cfe0b6b11da2e7a092dc9dde true


14:03:49

Unable to find WCG_Andrei55.  Please type exec rac to see helpful hints to proceed.  (code -1)

Registered for the project.Address created. Why it doesn 't connect.

When trying to run the new wallet installer from Biblepay.org, I get an error:

Installer integrity check has failed.

Also a question about the new dual mining, is it required to use the CLI miner or does the new wallet dual mine as well?  Thanks!

*** BiblePay - Commercial for 2020 ***



https://san.biblepay.org/Media/BiblePay_2020_Commercial.mp4