Topic: BiblePay | 10% to Orphan-Charity | RANDOMX MINING | Sanctuaries (Masternodes) - page 301. (Read 243437 times)

You don't need to do the 1,550,001 transaction again. After you are done setting up the MN on the new host (using the same privkey etc.), you just need to update the IP address in your masternode.conf file, restart the controller wallet and press "Start alias". Then you can shut down the old host. This way you can have little to no delay.

Our last IPFS node was down and we restarted it, the theymos command works again.

from what host to?

I think it may, for one cycle, but cannot say for sure.  Let us know?

Fair point.. Will pass it along

On a side note ... since theymos has a negative viewpoint of BiblePay, I doubt if he would want to be connected with us in any manner.

To avoid creating a potential PR problem, Rob might want to change the name of the "theymos Report" and command to something else, or respectfully ask theymos if he approves.

I'm getting ready to move a masternode from one host to another.
Will this delay rewards due to MN seniority issues, etc?

Hmm yeah something is not right,  I will pass it along.

You're issue is different.. you have ~4700 RAC on WCG (7050 for our purposes with the 1.5x multiplier)
and 5400 on Rosetta

With the 1.5x multiplier for WCG this puts you at 12,500 RAC,  with the stake of 8200 being way too low.

You need a minimum of 10,000 BBP to stake for 10% reward.  

You have two options :
1. slow down your BOINC clients (or stop them for a few days) and let your RAC decay
2. Buy some BBP from an exchange to get you going.

You can use the command console to check these going forward:

Returns current BOINC status, also shows weighted RAC:
exec getboincinfo  

Gives you an estimate of how many coins you need to stake for which level reward:
exec totalrac

His issue was the coins being scattered among the receiving addresses..  Following the steps below fixed it:

use the coin control box, use the "select all" box, and
send the coins to yourself.

You will have to wait 5-10 confirms then the PODC update should work.

in case anyone else has the same issue.

is this ok? it takes eternity to response and then shows only zeros

{
  "Command": "theymos",
  "Theymos Report": "11-01-2018 22:22:27",
  "Total Coinbase Emission (Money Supply)": 1064026991,
  "Total Charity Budget": 106402699.1,
  "Total BBP Sold on Exchanges": 0,
  "Total BTC Raised": 0,
  "Avg BTC Price": 0,
  "Avg BBP Price": 0,
  "Total Revenue in USD": 0,
  "Total Expenses in USD": 0,
  "Note:": "See Business Objects | Expenses or Revenue for more details and attached PDF receipts.  Click Navigate_To to view the PDF."

My CPID: 8f685f713ff3a7fab508e60c936f4d58
I'm running version 1.1.5.9.
My magnitude is only 0.01 so that's also strange.

thanks, researching.

Edit: sent you a PM, please respond when you have a moment.  I need some more info that's better not to share publicly

I am running 1.1.5.9

Which version client are you running?
There was an issue in the past with that error message, if it is the 1.1.5.9 version, we can do some debugging.

please provide your CPID, PM or here so we can research.

I'm having the same issue also.  Running one wallet.  I have 2.8M BBP coins and a sanctuary I just brought online this past Sunday.  Ever since the sanctuary came online (coincidence?) my wallet stopped sending out PODC updates.  My UTXOWeight remains at 0 (zero) and I've stopped receiving rewards the past 2 days.

I tried running this command:  exec podcupdate true

and it comes back with the following response:

17:00:53

exec podcupdate true


17:01:09

{
  "Command": "podcupdate",
  "PODCUpdate": "Unable to locate enough unlocked funds not equal to 1,550,001 biblepay."
}

Here's my boincinfo output:

10:34:03

exec getboincinfo


10:34:06

{
  "Command": "getboincinfo",
  "CPID": "cc94a264bcf00ce5005e249018c0da0d",
  "Address": "BBAcffuqfSVq77YBgwBBEkSRtE9vT38XHM",
  "CPIDS": "cc94a264bcf00ce5005e249018c0da0d;",
  "CPID-Age (hours)": 428078,
  "NextSuperblockHeight": 80575,
  "NextSuperblockBudget": 1060909,
  "cc94a264bcf00ce5005e249018c0da0d_ADDRESS": "BBAcffuqfSVq77YBgwBBEkSRtE9vT38XHM",
  "cc94a264bcf00ce5005e249018c0da0d_RAC": 13720.27,
  "cc94a264bcf00ce5005e249018c0da0d_TEAM": 15044,
  "cc94a264bcf00ce5005e249018c0da0d_WCGRAC": 54213.67,
  "cc94a264bcf00ce5005e249018c0da0d_TaskWeight": 0,
  "cc94a264bcf00ce5005e249018c0da0d_UTXOWeight": 0,
  "Total_RAC": 67933.94,
  "Total Payments (One Day)": 0,
  "Total Payments (One Week)": 33743,
  "Total Budget (One Day)": 1060909,
  "Total Budget (One Week)": 6413922,
  "Superblock Count (One Week)": 7,
  "Superblock Hit Count (One Week)": 7,
  "Superblock List": "80370,80165,79960,79755,79550,79345,79140",
  "Last Superblock Height": 80370,
  "Last Superblock Budget": 1060909,
  "Last Superblock Payment": 0,
  "Magnitude (One-Day)": 0,
  "Magnitude (One-Week)": 5.260899649231781
}

Even with the 1.55M BBP locked up I still have 1.3M BBP unlocked which is more than enough to still receive 100% rewards.

There are a lot of people on the superblock list that now have zero magnitude, yet have RAC and WCGRAC.  I think this problem involves many people.

What do we do???

Since October 26th I haven't received any PODC payments either.
I'm running only one wallet and that's running 24/7.
My BOINC machine is running fine and reporting task completions just fine.

Anyone here who knows what could be the problem?

if you run this RPC command:

exec utxoreport fa5062d1c29baf2e298b674f40ee59b7

You will see some tiny updates (450-500bbp) posted alongside the normal ones.  

You must have 2 or more wallets that are doing PODC updates, on the second edit biblepay.conf and add the line:

utxooverride=-1

Unlikely, but possible I suppose? 

This is more likely what happened to the pool, but I'm only speculating.