Topic: [BitAxe.ca] ASIC Mining Equipment Manufacturer - JUST LAUNCHED!! - page 5. (Read 19378 times)
Get them to look at as in...send to them, never to be seen again?
I think your prices are steep. Steamboat's group buy is providing completed PCBs for ~$100 - not to mention 16 rather than 10 ASIC pads per card. https://bitcointalksearch.org/topic/liquid-synergy-designs-inc-asic-mining-hardware-192916
They may not have been aware of the other DIY projects on the go.
I am happy to say that I was able to speak with a real human tonight.
After speaking with them on the phone I may be getting them to look at the defective unit.
As a Canadian DIY Avalon Startup I wish them success.
I may even get them to build 2 extra modules for my units....
However like they had posted, presently they have to wait on Avalon ASIC Chips before they get to that stage.
I'm not an engineer (tho many here are), but how can you be 100% sure these will work when you haven't yet had a chance to try putting Avalon's chips in them? All the other DIY Avalon producers say they are waiting on sample chips to make final adjustments & ensure they hash correctly.
Honestly we are trusting Avalon's design. The manufacturer is established and high quality, so that is not a risk at all. If there is a manufacturer's defect we will rectify the situation.
Well I have one of my boards with 5 dead chips.
Perhaps you can at least provide Avalon local support?
P.S.
Reply when you can to the pm I sent
Not sure if they are dead but rather not reporting.
Post for failed chips.
https://bitcointalksearch.org/topic/m.1993448
Here is the photos of the unit before and after power supply upgrade.
https://bitcointalksearch.org/topic/m.1910169
I think your prices are steep. Steamboat's group buy is providing completed PCBs for ~$100 - not to mention 16 rather than 10 ASIC pads per card. https://bitcointalksearch.org/topic/liquid-synergy-designs-inc-asic-mining-hardware-192916
I'm not an engineer (tho many here are), but how can you be 100% sure these will work when you haven't yet had a chance to try putting Avalon's chips in them? All the other DIY Avalon producers say they are waiting on sample chips to make final adjustments & ensure they hash correctly.
Honestly we are trusting Avalon's design. The manufacturer is established and high quality, so that is not a risk at all. If there is a manufacturer's defect we will rectify the situation.
Well I have one of my boards with 5 dead chips.
Perhaps you can at least provide Avalon local support?
P.S.
Reply when you can to the pm I sent
I'm not an engineer (tho many here are), but how can you be 100% sure these will work when you haven't yet had a chance to try putting Avalon's chips in them? All the other DIY Avalon producers say they are waiting on sample chips to make final adjustments & ensure they hash correctly.
Honestly we are trusting Avalon's design. The manufacturer is established and high quality, so that is not a risk at all. If there is a manufacturer's defect we will rectify the situation.
Well I have one of my boards with 5 dead chips.
Perhaps you can at least provide Avalon local support?
P.S.
Reply when you can to the pm I sent
Well we will be carrying basically the entire Avalon inventory soon (no Avalon ASIC yet of course)
We have PCB's now and are working on many many other components. The BOM's alone take a good 2 days to work through.
PM replied.
beware of sweat talker.. only have 22 posts what kind credibility can you get? you are very misleading with your order page up with the different payment processors , newbies beware of his crap.. what a joker
Totally understandable and we would be thinking the very same thing if we were in your shoes.
However, we have to start somewhere. We understand your mistrust and we are willing to put in the time to gain it. We have PCB's ready to go right now and the first person to order one will verify there quality and authenticity.
I'm not an engineer (tho many here are), but how can you be 100% sure these will work when you haven't yet had a chance to try putting Avalon's chips in them? All the other DIY Avalon producers say they are waiting on sample chips to make final adjustments & ensure they hash correctly.
Honestly we are trusting Avalon's design. The manufacturer is established and high quality, so that is not a risk at all. If there is a manufacturer's defect we will rectify the situation.
Well I have one of my boards with 5 dead chips.
Perhaps you can at least provide Avalon local support?
P.S.
Reply when you can to the pm I sent
I'm not an engineer (tho many here are), but how can you be 100% sure these will work when you haven't yet had a chance to try putting Avalon's chips in them? All the other DIY Avalon producers say they are waiting on sample chips to make final adjustments & ensure they hash correctly.
Honestly we are trusting Avalon's design. The manufacturer is established and high quality, so that is not a risk at all. If there is a manufacturer's defect we will rectify the situation.
Do you have all the parts for the hash unit except the ASIC ?
beware of sweat talker.. only have 22 posts what kind credibility can you get? you are very misleading with your order page up with the different payment processors , newbies beware of his crap.. what a joker
I'm not an engineer (tho many here are), but how can you be 100% sure these will work when you haven't yet had a chance to try putting Avalon's chips in them? All the other DIY Avalon producers say they are waiting on sample chips to make final adjustments & ensure they hash correctly.
We don't have AVALON ASIC chips. You have to send yours in if you want full assembly.
Once the orders for fully assembled AVALON supplied ASICs reaches a threshold then we will order a batch of chips from Avalon.
You can order PCB's that fit your Avalon ASIC now however.
Once the orders for fully assembled AVALON supplied ASICs reaches a threshold then we will order a batch of chips from Avalon.
You can order PCB's that fit your Avalon ASIC now however.
If you say this why does website state your in phase 3 "Build and sell Avalon ASIC Rigs and all the components. We will carry stock from the smallest screw upto an entire fully assembled ASIC rig!" Is the chip itself not in your phase 3 statement?
Because phase 3 is a few months away, at which time we will assemble Avalon ASIC rigs with either your ASIC chips or with our Avalon supplied ASIC chips.
Well, PayPal is a good sign at least...right?
Seriously though we've had a rash of ASIC sellers appear on newb accounts.
There are plenty of things you can do to allay peoples' fears straight from the off.
Seriously though we've had a rash of ASIC sellers appear on newb accounts.
There are plenty of things you can do to allay peoples' fears straight from the off.
We totally understand that and realize that earning trust will be an uphill battle.
What am I suppose to do with a board with no Asics and no serial or USB port? Why would I even want to mount my chips on your board, so I can stick them on my wall and say that I am cool?
I smell rotting fish.
Quote
WHO
Are you willing to verify your identity?
Of course, but only to one hero member of the community's choosing.
Are you willing to verify your identity?
Of course, but only to one hero member of the community's choosing.
I smell rotting fish.
Do you? Why? Because we are willing to verify our identity to you?
Show pics of PCB's for us please.
Here is a link to the us holding it:
https://bitaxe.ca/wp-content/uploads/2013/05/New-01.jpg
And here is one of the "bricks" of PCB's we have sitting in front of the editing window for this post:
https://bitaxe.ca/wp-content/uploads/2013/05/DSCF1540.jpg
Well, PayPal is a good sign at least...right?
Seriously though we've had a rash of ASIC sellers appear on newb accounts.
There are plenty of things you can do to allay peoples' fears straight from the off.
Seriously though we've had a rash of ASIC sellers appear on newb accounts.
There are plenty of things you can do to allay peoples' fears straight from the off.
We don't have AVALON ASIC chips. You have to send yours in if you want full assembly.
Once the orders for fully assembled AVALON supplied ASICs reaches a threshold then we will order a batch of chips from Avalon.
You can order PCB's that fit your Avalon ASIC now however.
Once the orders for fully assembled AVALON supplied ASICs reaches a threshold then we will order a batch of chips from Avalon.
You can order PCB's that fit your Avalon ASIC now however.
If you say this why does website state your in phase 3 "Build and sell Avalon ASIC Rigs and all the components. We will carry stock from the smallest screw upto an entire fully assembled ASIC rig!" Is the chip itself not in your phase 3 statement?
What am I suppose to do with a board with no Asics and no serial or USB port? Why would I even want to mount my chips on your board, so I can stick them on my wall and say that I am cool?
First you buy the cards, then you buy the controller board/PDU/Heat sink/Case. It is all modular so you can just plug it in once you have all the parts.
This is of course assuming you bought enough Avalon ASIC chips.
Show pics of PCB's for us please.
Jump to: