◈◈Bitcredit ◈◈ Migrating to UniQredit◈◈ - page 175.

thelonecrouton

legendary

Activity: 966

Merit: 1000

Quote from: dragos_bdi on April 10, 2015, 06:16:31 PM

Working Nodes:
addnode "91.230.123.101:9999" add
addnode "91.230.123.101:8877" add

Thanks, that got me to block 85002, 13hrs behind, but I am stuck there.

No bitcredit client has ever connected to more than 1 peer for me. Currently getpeerinfo shows only 91.230.123.101:9999.

dragos_bdi

sr. member

Activity: 322

Merit: 250

Quote from: thelonecrouton on April 10, 2015, 02:28:15 PM

Compiled v0.30.16.5-c1dc563-dirty but all alone, no peers to sync from... Sad

Code:

2015-04-10 19:13:42 3 addresses found from DNS seeds
2015-04-10 19:13:42 dnsseed thread exit
2015-04-10 19:13:42 GUI: PaymentServer::LoadRootCAs : Loaded  175  root certificates 
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/overviewpage.cpp:268
2015-04-10 19:13:42 GUI: QObject::connect:  (receiver name: 'OverviewPage')
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/sendcoinsdialog.cpp:145
2015-04-10 19:13:42 GUI: QObject::connect:  (receiver name: 'SendCoinsDialog')
2015-04-10 19:13:43 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:43 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:44 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:45 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:46 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:47 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:49 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)...etc

Also shown here is the balance-changed issue I'm having - it won't update without a client restart.

198.52.160.64:8877
198.52.160.60:8877
198.52.160.59:8877

All three are Dev nodes, and all three are down. Use my nodes till they will go up.

dragos_bdi

sr. member

Activity: 322

Merit: 250

Till the dev comes with an official solution, to keep running use this:

The Wallet - Windows x64 - Fix for Getblocktemplate error caused by votes - https://mega.co.nz/#!CpdwUQ5J!NADKboc_bmI4hByU1yCxMv5_1ePez7qP_je24k6cXy4
My fork for who want's to compile under Linux - https://github.com/dragosbdi/bicreditsnew

Working Nodes:
addnode "91.230.123.101:9999" add
addnode "91.230.123.101:8877" add

thelonecrouton

legendary

Activity: 966

Merit: 1000

Compiled v0.30.16.5-c1dc563-dirty but all alone, no peers to sync from... Sad

Code:

2015-04-10 19:13:42 3 addresses found from DNS seeds
2015-04-10 19:13:42 dnsseed thread exit
2015-04-10 19:13:42 GUI: PaymentServer::LoadRootCAs : Loaded  175  root certificates 
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/overviewpage.cpp:268
2015-04-10 19:13:42 GUI: QObject::connect:  (receiver name: 'OverviewPage')
2015-04-10 19:13:42 GUI: QObject::connect: No such signal WalletModel::balanceChanged(CAmount,CAmount,CAmount,CAmount,CAmount,CAmount,CAmount) in qt/sendcoinsdialog.cpp:145
2015-04-10 19:13:42 GUI: QObject::connect:  (receiver name: 'SendCoinsDialog')
2015-04-10 19:13:43 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:43 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:44 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:45 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:46 connect() to 198.52.160.64:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:47 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:48 connect() to 198.52.160.59:8877 failed after select(): Connection refused (111)
2015-04-10 19:13:49 connect() to 198.52.160.60:8877 failed after select(): Connection refused (111)...etc

Also shown here is the balance-changed issue I'm having - it won't update without a client restart.

bitcreditscc

hero member

Activity: 602

Merit: 501

bug detected, i'm back

dragos_bdi

sr. member

Activity: 322

Merit: 250

Quote from: tommyj1 on April 09, 2015, 04:50:49 PM

Quote from: Baudrate on April 09, 2015, 04:43:14 PM

Quote from: djemphol on April 09, 2015, 03:33:32 AM

Quote from: bitcreditscc on April 09, 2015, 02:49:42 AM

UPDATE:- https://mega.co.nz/#!Jk5FwYTR!tHyXURoA5QD1icr9eN2WYVwLDKYdTRCUqf4pFeKjWok

DISCONNECTS ALL OLD CLIENTS

LIST OF SUPPORTED CLIENTS

0.30.16.4
0.30.16.5
0.30.17-rc

Edit:

Ok, succesfully updated to the new client.

Does this mean that 0.30.16.4b is not OK to use?

yes, im using this one: v0.30.16.4-5e9b877-dirty

Just stick with the official wallet on the first post.

tommyj1

hero member

Activity: 1232

Merit: 501

Quote from: Baudrate on April 09, 2015, 04:43:14 PM

Quote from: djemphol on April 09, 2015, 03:33:32 AM

Quote from: bitcreditscc on April 09, 2015, 02:49:42 AM

UPDATE:- https://mega.co.nz/#!Jk5FwYTR!tHyXURoA5QD1icr9eN2WYVwLDKYdTRCUqf4pFeKjWok

DISCONNECTS ALL OLD CLIENTS

LIST OF SUPPORTED CLIENTS

0.30.16.4
0.30.16.5
0.30.17-rc

Edit:

Ok, succesfully updated to the new client.

Does this mean that 0.30.16.4b is not OK to use?

yes, im using this one: v0.30.16.4-5e9b877-dirty

Baudrate

newbie

Activity: 30

Merit: 0

Quote from: djemphol on April 09, 2015, 03:33:32 AM

Quote from: bitcreditscc on April 09, 2015, 02:49:42 AM

UPDATE:- https://mega.co.nz/#!Jk5FwYTR!tHyXURoA5QD1icr9eN2WYVwLDKYdTRCUqf4pFeKjWok

DISCONNECTS ALL OLD CLIENTS

LIST OF SUPPORTED CLIENTS

0.30.16.4
0.30.16.5
0.30.17-rc

Edit:

Ok, succesfully updated to the new client.

Does this mean that 0.30.16.4b is not OK to use?

dragos_bdi

sr. member

Activity: 322

Merit: 250

So, was not lost time writing the wiki Grin

sdef2

member

Activity: 60

Merit: 10

Quote from: dragos_bdi on April 09, 2015, 01:02:21 PM

Quote from: dragos_bdi on April 09, 2015, 12:48:10 PM

Quote from: sdef2 on April 09, 2015, 12:12:11 PM

i have build from source on ubuntu 14.04 , the qt binary gets compiled ok i think, but it segfaults on startup (the gui flashes a short moment, then segfault).

already tried with fresh .bitcredit directory as well - same problem.

any suggestions?

edit: nothing in debug.log either. bitcreditd and cli binary seem to work btw

trying now myself

To me, it's working. Compiled from source https://github.com/bitcreditscc/bicreditsnew.

Check the deps from here: http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit
Go to ~/.bitcredit, backup your wallet.dat and peers.dat, delete everything else, start the wallet and wait till it's sync.

Return with a working/not working status.

Must have been some dependancy problem, compiled on another computer and copied over the binaries to my own pc, works fine now. The wiki was helpful, thanks.

dragos_bdi

sr. member

Activity: 322

Merit: 250

Quote from: NaN_PTS on April 08, 2015, 08:57:00 PM

I found the bug, which caused the drops in the hash rate of p2pool, if a block contains any transactions. Please update the clpts pool miner to v2.1: https://bitsharestalk.org/index.php/topic,2598.0
Warning: Do not use the current version of the clpts rpc solo miner after block 85000 because the blocks will not be accepted by the network! I will provide an update as soon as possible.

First example of block found by p2pool, probably by your new miner, that include a second transaction, http://bitexp.net/block.php?coin=Bitcredits&height=84436

dragos_bdi

sr. member

Activity: 322

Merit: 250

Quote from: dragos_bdi on April 09, 2015, 12:48:10 PM

Quote from: sdef2 on April 09, 2015, 12:12:11 PM

i have build from source on ubuntu 14.04 , the qt binary gets compiled ok i think, but it segfaults on startup (the gui flashes a short moment, then segfault).

already tried with fresh .bitcredit directory as well - same problem.

any suggestions?

edit: nothing in debug.log either. bitcreditd and cli binary seem to work btw

trying now myself

To me, it's working. Compiled from source https://github.com/bitcreditscc/bicreditsnew.

Check the deps from here: http://bitcredit.wikia.com/wiki/How_to_Compile_Bitcredit
Go to ~/.bitcredit, backup your wallet.dat and peers.dat, delete everything else, start the wallet and wait till it's sync.

Return with a working/not working status.

dragos_bdi

sr. member

Activity: 322

Merit: 250

Quote from: sdef2 on April 09, 2015, 12:12:11 PM

i have build from source on ubuntu 14.04 , the qt binary gets compiled ok i think, but it segfaults on startup (the gui flashes a short moment, then segfault).

already tried with fresh .bitcredit directory as well - same problem.

any suggestions?

edit: nothing in debug.log either. bitcreditd and cli binary seem to work btw

trying now myself

sdef2

member

Activity: 60

Merit: 10

i have build from source on ubuntu 14.04 , the qt binary gets compiled ok i think, but it segfaults on startup (the gui flashes a short moment, then segfault).

already tried with fresh .bitcredit directory as well - same problem.

any suggestions?

edit: nothing in debug.log either. bitcreditd and cli binary seem to work btw

bitcreditscc

hero member

Activity: 602

Merit: 501

Will be unavailable on all channels for next 12 hours, personal stuff to deal with. Please refer all enquiries to mining.ypool.net , in the chatvsection, fellow miners, BN holders and development guys are there

dragos_bdi

sr. member

Activity: 322

Merit: 250

Quote from: hepilord on April 09, 2015, 03:43:35 AM

Quote from: dragos_bdi on April 09, 2015, 03:37:34 AM

Quote from: hepilord on April 09, 2015, 03:33:51 AM

Quote from: dragos_bdi on April 09, 2015, 03:30:08 AM

Quote from: hepilord on April 09, 2015, 03:25:12 AM

Quote from: NaN_PTS on April 08, 2015, 08:57:00 PM

I found the bug, which caused the drops in the hash rate of p2pool, if a block contains any transactions. Please update the clpts pool miner to v2.1: https://bitsharestalk.org/index.php/topic,2598.0
Warning: Do not use the current version of the clpts rpc solo miner after block 85000 because the blocks will not be accepted by the network! I will provide an update as soon as possible.

What with cpu mining?

You're CPU mining solo ? Shocked

no, i mining on p2pool, over all night it didn't accept any shares

From what I know, affected are only solominers.
On p2pool must be ok.
Hint: Mine to bcrp2pool.website:8776 it has smaller local hashrate so, he accept shares at lower diff then p2pool.website.

ok , i tryed on it. Is exist working miner for nvidia cards?

pts-getwork, it's the only one that I know about ...

hepilord

full member

Activity: 171

Merit: 100

Quote from: dragos_bdi on April 09, 2015, 03:37:34 AM

Quote from: hepilord on April 09, 2015, 03:33:51 AM

Quote from: dragos_bdi on April 09, 2015, 03:30:08 AM

Quote from: hepilord on April 09, 2015, 03:25:12 AM

Quote from: NaN_PTS on April 08, 2015, 08:57:00 PM

I found the bug, which caused the drops in the hash rate of p2pool, if a block contains any transactions. Please update the clpts pool miner to v2.1: https://bitsharestalk.org/index.php/topic,2598.0
Warning: Do not use the current version of the clpts rpc solo miner after block 85000 because the blocks will not be accepted by the network! I will provide an update as soon as possible.

What with cpu mining?

You're CPU mining solo ? Shocked

no, i mining on p2pool, over all night it didn't accept any shares

From what I know, affected are only solominers.
On p2pool must be ok.
Hint: Mine to bcrp2pool.website:8776 it has smaller local hashrate so, he accept shares at lower diff then p2pool.website.

ok , i tryed on it. Is exist working miner for nvidia cards?

dragos_bdi

sr. member

Activity: 322

Merit: 250

Quote from: hepilord on April 09, 2015, 03:33:51 AM

Quote from: dragos_bdi on April 09, 2015, 03:30:08 AM

Quote from: hepilord on April 09, 2015, 03:25:12 AM

Quote from: NaN_PTS on April 08, 2015, 08:57:00 PM

I found the bug, which caused the drops in the hash rate of p2pool, if a block contains any transactions. Please update the clpts pool miner to v2.1: https://bitsharestalk.org/index.php/topic,2598.0
Warning: Do not use the current version of the clpts rpc solo miner after block 85000 because the blocks will not be accepted by the network! I will provide an update as soon as possible.

What with cpu mining?

You're CPU mining solo ? Shocked

no, i mining on p2pool, over all night it didn't accept any shares

From what I know, affected are only solominers.
On p2pool must be ok.
Hint: Mine to bcrp2pool.website:8776 it has smaller local hashrate so, he accept shares at lower diff then p2pool.website.

hepilord

full member

Activity: 171

Merit: 100

Quote from: dragos_bdi on April 09, 2015, 03:30:08 AM

Quote from: hepilord on April 09, 2015, 03:25:12 AM

Quote from: NaN_PTS on April 08, 2015, 08:57:00 PM

I found the bug, which caused the drops in the hash rate of p2pool, if a block contains any transactions. Please update the clpts pool miner to v2.1: https://bitsharestalk.org/index.php/topic,2598.0
Warning: Do not use the current version of the clpts rpc solo miner after block 85000 because the blocks will not be accepted by the network! I will provide an update as soon as possible.

What with cpu mining?

You're CPU mining solo ? Shocked

no, i mining on p2pool, over all night it didn't accept any shares

djemphol

member

Activity: 96

Merit: 10

Quote from: bitcreditscc on April 09, 2015, 02:49:42 AM

UPDATE:- https://mega.co.nz/#!Jk5FwYTR!tHyXURoA5QD1icr9eN2WYVwLDKYdTRCUqf4pFeKjWok

DISCONNECTS ALL OLD CLIENTS

LIST OF SUPPORTED CLIENTS

0.30.16.4
0.30.16.5
0.30.17-rc

Edit:

Ok, succesfully updated to the new client.

Topic: ◈◈Bitcredit ◈◈ Migrating to UniQredit◈◈ - page 175. (Read 284545 times)