Pages:
Author

Topic: ◈◈Bitcredit ◈◈ Migrating to UniQredit◈◈ - page 36. (Read 284547 times)

hero member
Activity: 501
Merit: 503
If we get some extra time (not likely)
it'd be nice to get some displayed info for miners solo mining. Ideally it could show you the keys your working with. (either autodetect or you could add more) then it could show you whether the key is available to be mined against. and if not how many blocks til its available. if none are available it would turn off the miner and when any become available it turns back on to the last known thread setting.

also @ hack_ when your using external miner and you solve a block within the last 40.. does it bork your wallet or no.

While it would be nice ....i think the dev is right, the GUI is crowded already. I guess he'll have to get inventive.

Using external miner i have no problems , it will always mine a block when my turn to contribute comes along.
hero member
Activity: 501
Merit: 503
Hopefully last issue from me.

Is putting the wallet.dat from the appdata folder backup just a drop in the roaming folder and renaming to wallet.dat?

I show block 265,169 at 36 hours behind but last transaction from 7/14/2015 with only 6.08721855 BCR in my wallet. I did not do a back-up from the option on the bottom row.

If not frick me, I am down to 2 BN.



If you are sure you have the right back up file then just get the private keys and import in new wallet after successful sync
legendary
Activity: 1610
Merit: 1008
Forget-about-it
Hopefully last issue from me.

Is putting the wallet.dat from the appdata folder backup just a drop in the roaming folder and renaming to wallet.dat?

I show block 265,169 at 36 hours behind but last transaction from 7/14/2015 with only 6.08721855 BCR in my wallet. I did not do a back-up from the option on the bottom row.

If not frick me, I am down to 2 BN.


what happened to the original wallet that promp you to grab one from the backups
did it rescan when you loaded it?

someone better at this than me can likely walk you through a proper rescan or repairwallet command cycle. unfortunately if the backup was from way before your last known wallet use... then shits possibly hit the fan.
legendary
Activity: 1400
Merit: 1000
Hopefully last issue from me.

Is putting the wallet.dat from the appdata folder backup just a drop in the roaming folder and renaming to wallet.dat?

I show block 265,169 at 36 hours behind but last transaction from 7/14/2015 with only 6.08721855 BCR in my wallet. I did not do a back-up from the option on the bottom row.

If not frick me, I am down to 2 BN.

legendary
Activity: 1610
Merit: 1008
Forget-about-it
If we get some extra time (not likely)
it'd be nice to get some displayed info for miners solo mining. Ideally it could show you the keys your working with. (either autodetect or you could add more) then it could show you whether the key is available to be mined against. and if not how many blocks til its available. if none are available it would turn off the miner and when any become available it turns back on to the last known thread setting.

also @ hack_ when your using external miner and you solve a block within the last 40.. does it bork your wallet or no.
legendary
Activity: 1400
Merit: 1000
http://www.7-zip.org/

7-Zip is open source software and works nice  Smiley

Thanks.

Installed and ran and unzipped all the files perfect.
legendary
Activity: 1400
Merit: 1000
mark all the files ( ctrl a), unzipp. Worked fine with 7-Zip.

That's what I mean. I don't have an option to unzip:







look at my post above..... start with bcr's link, right click extract content, youll get 10 files.... good. now open winrar from the start menu not the right click context dialog. Winrar will show you a folder view - navigate to the folder where you extracted the 10 7z files and click on anyone of those and winrar will you you its contents then just drag its contents out of there to your desired folder or click on "extract to"

Stupid question because I get the Winrar Diagnostic error: Can not open file.

Does it work with the Evaluation Copy (yeah I am cheap Smiley )  I did the Extract to and tried to drag the contents but it just left them zipped.

Maybe I need to try winzip or it could just be I am having operator error (in layman terms I am an idiot).

Nope, I got the free version - i get the buy now screen and adverts every time i open winrar,

Ok, then I am an idiot and can't get this to unzip.
member
Activity: 89
Merit: 10
http://www.7-zip.org/

7-Zip is open source software and works nice  Smiley
legendary
Activity: 1246
Merit: 1005
mark all the files ( ctrl a), unzipp. Worked fine with 7-Zip.

That's what I mean. I don't have an option to unzip:







look at my post above..... start with bcr's link, right click extract content, youll get 10 files.... good. now open winrar from the start menu not the right click context dialog. Winrar will show you a folder view - navigate to the folder where you extracted the 10 7z files and click on anyone of those and winrar will you you its contents then just drag its contents out of there to your desired folder or click on "extract to"

Stupid question because I get the Winrar Diagnostic error: Can not open file.

Does it work with the Evaluation Copy (yeah I am cheap Smiley )  I did the Extract to and tried to drag the contents but it just left them zipped.

Maybe I need to try winzip or it could just be I am having operator error (in layman terms I am an idiot).

Nope, I got the free version - i get the buy now screen and adverts every time i open winrar,
legendary
Activity: 1400
Merit: 1000
mark all the files ( ctrl a), unzipp. Worked fine with 7-Zip.

That's what I mean. I don't have an option to unzip:







look at my post above..... start with bcr's link, right click extract content, youll get 10 files.... good. now open winrar from the start menu not the right click context dialog. Winrar will show you a folder view - navigate to the folder where you extracted the 10 7z files and click on anyone of those and winrar will you you its contents then just drag its contents out of there to your desired folder or click on "extract to"

Stupid question because I get the Winrar Diagnostic error: Can not open file.

Does it work with the Evaluation Copy (yeah I am cheap Smiley )  I did the Extract to and tried to drag the contents but it just left them zipped.

Maybe I need to try winzip or it could just be I am having operator error (in layman terms I am an idiot).
legendary
Activity: 1246
Merit: 1005
mark all the files ( ctrl a), unzipp. Worked fine with 7-Zip.

That's what I mean. I don't have an option to unzip:

[img]http://s21.postimg.org/7xq9pha0n/Capture2.png

You can see here is the option to unzip:

[img]http://s22.postimg.org/40neaqvmp/Capture3.png

And if I rename (drop the 00.1) then it turns into a zip. Only problem I don't know what files go with what. As I would have to also rename the files since they can't be the same.

[img]http://s15.postimg.org/bhy2nirl7/Capture4.png





look at my post above..... start with bcr's link, right click extract content, youll get 10 files.... good. now open winrar from the start menu not the right click context dialog. Winrar will show you a folder view - navigate to the folder where you extracted the 10 7z files and click on anyone of those and winrar will you you its contents then just drag its contents out of there to your desired folder or click on "extract to"
legendary
Activity: 1400
Merit: 1000
mark all the files ( ctrl a), unzipp. Worked fine with 7-Zip.

That's what I mean. I don't have an option to unzip:



You can see here is the option to unzip:



And if I rename (drop the 00.1) then it turns into a zip. Only problem I don't know what files go with what. As I would have to also rename the files since they can't be the same.





legendary
Activity: 1246
Merit: 1005
with winrar it doesn't need to be renamed... you have to open winrar first then navigate to the folder with the 10 7zs files, then click on ONE OF THOSE to view its contents, then click on extract files on winrar.
member
Activity: 89
Merit: 10
mark all the files ( ctrl a), unzipp. Worked fine with 7-Zip.
legendary
Activity: 1400
Merit: 1000
yeah i had the same problem, half the time it unzipped into the same zipped folder structure. not sure if proletariat can shine some light into it with winrar steps.

try unzipping the 10 files or the first of the 10 not the folder theyre in

I think they need to be renamed because when I click I only get an option to rezip them. If I take the last extention off (.001, .002, etc) then they turn into a zip file.
legendary
Activity: 1610
Merit: 1008
Forget-about-it
yeah i had the same problem, half the time it unzipped into the same zipped folder structure. not sure if proletariat can shine some light into it with winrar steps.

try unzipping the 10 files or the first of the 10 not the folder theyre in
legendary
Activity: 1400
Merit: 1000
@jasemoney
@hack_

Thanks for the info. Never knew it actually got implemented. I'll be honest. I only look at the thread once a week or two with all the issues I am having under Windows. Which is ironic because I never had any issues up until version 0.30.17.5 or abouts there with any wallets.

I just ran the last Windows version with the last bootstrap that @bitcreditscc posted and I am at about 12 hours later and only synced at block 72655 and 37 weeks behind still.

I have no idea what the change that was so drastic that started causing these issues but it has been a pain in the rear. I think I have one bank node that has not been started in over 5 months now.


I find that extremely strange. You are doing it wrong. If you bootstrap from the version i linked, then you should sync in under ten minutes.

https://bitcointalksearch.org/topic/m.13217451  this is the link to the latest wallet...
https://bitcointalksearch.org/topic/m.13215645  this is the link to the latest bootstrap...

the boostrap is a 7z zip file, you can use winrare or 7zip to extract the 3 folders made from the multiple zip files.
so to run like normal in your data directory..
 delete everything EXCEPT:
bitcredit.conf
miningkeys.dat
wallet.dat

then add the 3 folders from the bootstrap

(make a backup of your wallet.dat)

this should sync rather quickly. confirm your synced height with chainz.

persoanlly i have an issue where if i close the wallet it will not sync on restart. a fix was implemented but i still have issues with this.  since you have a banknode you can mine. im not sure exactly but i believee at this time you can only mine 1 of 40 blocks. so if you solve a block your miner will automatically turn off in the wallet. youll have to wait for time to pass before turning it back on or the wallet will crash.
if you havent banknode minded before, copy the bcr address of your banknode and paste it into a text file in your data directory and rename it "miningkeys.dat"

*in the time since i posted this i was able to sync fresh.



I just redownloaded and unzipped it with winrar and I don't get 3 folders. This is what I get:



Inside the blocks-master folder are a total of 10 files. I have downloaded the bootstrap from 3 different computers and get the same thing. As you can see the blocks-master.zip is about 199 MB. Should there be more in this zip file?

EDIT: This is what I see in that folder

member
Activity: 89
Merit: 10
This message is back on Bittrex:

This market will be removed on Friday, December 18th 2015. The blockchain is no longer operational. If you are the developer of the coin and would like to keep it listed, please contact us at [email protected].
legendary
Activity: 1610
Merit: 1008
Forget-about-it
@jasemoney
@hack_

Thanks for the info. Never knew it actually got implemented. I'll be honest. I only look at the thread once a week or two with all the issues I am having under Windows. Which is ironic because I never had any issues up until version 0.30.17.5 or abouts there with any wallets.

I just ran the last Windows version with the last bootstrap that @bitcreditscc posted and I am at about 12 hours later and only synced at block 72655 and 37 weeks behind still.

I have no idea what the change that was so drastic that started causing these issues but it has been a pain in the rear. I think I have one bank node that has not been started in over 5 months now.


I find that extremely strange. You are doing it wrong. If you bootstrap from the version i linked, then you should sync in under ten minutes.

https://bitcointalksearch.org/topic/m.13217451  this is the link to the latest wallet...
https://bitcointalksearch.org/topic/m.13215645  this is the link to the latest bootstrap...

the boostrap is a 7z zip file, you can use winrare or 7zip to extract the 3 folders made from the multiple zip files.
so to run like normal in your data directory..
 delete everything EXCEPT:
bitcredit.conf
miningkeys.dat
wallet.dat

then add the 3 folders from the bootstrap

(make a backup of your wallet.dat)

this should sync rather quickly. confirm your synced height with chainz.

persoanlly i have an issue where if i close the wallet it will not sync on restart. a fix was implemented but i still have issues with this.  since you have a banknode you can mine. im not sure exactly but i believee at this time you can only mine 1 of 40 blocks. so if you solve a block your miner will automatically turn off in the wallet. youll have to wait for time to pass before turning it back on or the wallet will crash.
if you havent banknode minded before, copy the bcr address of your banknode and paste it into a text file in your data directory and rename it "miningkeys.dat"

*in the time since i posted this i was able to sync fresh.

legendary
Activity: 1246
Merit: 1005
@jasemoney
@hack_

Thanks for the info. Never knew it actually got implemented. I'll be honest. I only look at the thread once a week or two with all the issues I am having under Windows. Which is ironic because I never had any issues up until version 0.30.17.5 or abouts there with any wallets.

I just ran the last Windows version with the last bootstrap that @bitcreditscc posted and I am at about 12 hours later and only synced at block 72655 and 37 weeks behind still.

I have no idea what the change that was so drastic that started causing these issues but it has been a pain in the rear. I think I have one bank node that has not been started in over 5 months now.



 

maybe you didn't uncompress it correctly?
I'm a windows user, winrar for everything, had used bootstrap.dat or plain data contents for a bootstrap, downloaded from bcr's link and uncompressed the zip...... wtf do i to with these 10 .7z files, now what?  Cheesy ......... I had to ask, turns out those .7z files were part files wich uncompressed will give you the data contents....... oh and btw winrar handled the 7z parts just fine, it just wasn't assigned that extension.
TL;DR I'm an idiot  Grin
Pages:
Jump to: