Bitmain just announced the AntMiner A3 - 815GH/s Siacoin miner - Blake(2b) - page 30.

Mr_Snipes

full member

Activity: 280

Merit: 100

Quote from: rummy on January 19, 2018, 12:31:21 PM

be careful selling on ebay, all a customer has to do is mine with it for 30 days and return for a full refund no questions asked, ebay always sides with the customer. Good Luck

" uhm i dont like it anymore, it does not generate so much cash anymore, there, have it back!"

rummy

member

Activity: 86

Merit: 10

be careful selling on ebay, all a customer has to do is mine with it for 30 days and return for a full refund no questions asked, ebay always sides with the customer. Good Luck

elmejorrematador

member

Activity: 134

Merit: 21

Is anyone looking to buy one of these A3 miners? I have one I am selling on ebay, but I'd prefer to not support ebay or paypal as they barred my account that I had with them for 18 years because I bought funded Lealana physical coins. Let me know if you are interested.

BenRickert

full member

Activity: 420

Merit: 110

Talk about irresponsible reporting. Since when is pointing ASIC support at a new protocol anything but positive for that initiative?? Near as I can tell, this is great for the team on so many levels. Support, Security and not the least being, unbelievable elevation of recognition in the crypto world by virtue of this move! Now EVERYONE knows who they are!

"It now sees as though Bitmain are looking to squeeze the life out of another virtual currency - Siacoin."

bitcoinexplorer

sr. member

Activity: 420

Merit: 255

Obelisk threaten soft fork
The announcement of the Antminer A3 launch came out of the blue and has already caused a stir in the mining community due to its focus on the Blake(2b) hashing algorithm.

As it stands, Blockchain cloud storage service Sia uses Siacoin as it’s cryptocurrency, which is mined using the Blake(2b) algorithm.

Nebulous Labs, the studio behind Sia, launched its own ASIC cryptocurrency miners Obelisk which has been in presale since 2017. Two miners are available, the Decred cryptocurrency miner DC1 and the Siacoin miner SC1. The first batch has already sold out and is expected to ship in June this year.

Bitmain’s surprise announcement effectively muscles in on the market before Obelisk has shipped its new SC1 miners. The Chinese mining company has promised delivery within 10 days after full payment has been made.

This has not gone unnoticed, and Obelisk founder David Vorick posted a stern warning to Bitmain on the Obelisk Reddit forum, hinting at a soft fork that would disable the Bitmain A3 units from being able to mine the coin.

https://cointelegraph.com/news/obelisk-threaten-soft-fork-in-reaction-to-bitmain-antminer-a3-launch

BenRickert

full member

Activity: 420

Merit: 110

Quote from: Chan8 on January 19, 2018, 04:50:46 AM

Uh shouldnt concern you though right.. i actually applaud cryptocrane for handling his business!
Well done!

Quote from: Mr_Snipes on January 19, 2018, 02:36:25 AM

Quote from: CryptoCrane on January 19, 2018, 01:46:23 AM

Quote

How were you able to get around Bitmain's 1/customer limit? Did you simply purchase using multiple accounts or did you purchase from the Chinese site?

Come on, we know who you are Wink

I'm sure you found a way around it and will start selling them at mad markups like you did with the D3.
What did you charge ppl for D3 again ? 10 K ? Grin

I wonder how many you sold before it all went to hell

As professional miners it does concern us. His type are taking large swaths of availability off the supply chain so we can't do our jobs. He has no license as a distributor. He knowingly charges people 3,4,5 and 6 times what they are worth to stuff his own pockets. Knowing full well those people are going to lose a LOT of money. He is a criminal and should be in jail. You seem like an aspiring criminal too. Congratulations. You're another dreg in a world full of dregs.

madmartyk

legendary

Activity: 2702

Merit: 1030

Yes I am a pirate, 300 years too late!

I love E-Bay sellers hype!! Make $500 per day!! Like when these hit and DIFF jumps that is going to happen.

leemubay

newbie

Activity: 11

Merit: 0

hello do anybody know where we can mine with the antminer a3? i saw nanopool and siamining. but on the website there is no info how to setup a ASIC miner fot the pool...can you help me?

kpmhosting

copper member

Activity: 52

Merit: 0

Reliable Miner Hosting - https://kpmhosting.com

We have space from 1st February for ASIC miners hosting in Canada. Contact us at :-

http://kpmhosting.com

mady_qt

newbie

Activity: 84

Merit: 0

Quote from: joae1975 on January 18, 2018, 11:40:39 PM

Quote from: mady_qt on January 18, 2018, 09:25:44 PM

Hey all,
I managed to get 6 from all of my accounts ! Will post how it goes !

Bitmain tried to prevent hoarding but I guess where there's a will there's a way. I don't know how I'd manage to deal with one miner let alone 6. You must have resources. Best of luck.

Hi,
Not hoarding, I have more than 120 ASIC miners. I have 6 accounts on antpool, so got 6. Lets see what happens !

Chan8

sr. member

Activity: 378

Merit: 250

Uh shouldnt concern you though right.. i actually applaud cryptocrane for handling his business!
Well done!

Quote from: Mr_Snipes on January 19, 2018, 02:36:25 AM

Quote from: CryptoCrane on January 19, 2018, 01:46:23 AM

Quote

How were you able to get around Bitmain's 1/customer limit? Did you simply purchase using multiple accounts or did you purchase from the Chinese site?

Come on, we know who you are Wink

I'm sure you found a way around it and will start selling them at mad markups like you did with the D3.
What did you charge ppl for D3 again ? 10 K ? Grin

I wonder how many you sold before it all went to hell

Mr_Snipes

full member

Activity: 280

Merit: 100

Quote from: CryptoCrane on January 19, 2018, 01:46:23 AM

Quote

How were you able to get around Bitmain's 1/customer limit? Did you simply purchase using multiple accounts or did you purchase from the Chinese site?

Come on, we know who you are Wink

I'm sure you found a way around it and will start selling them at mad markups like you did with the D3.
What did you charge ppl for D3 again ? 10 K ? Grin

I wonder how many you sold before it all went to hell

eth_mining

newbie

Activity: 95

Merit: 0

Quote from: CryptoCrane on January 19, 2018, 02:10:22 AM

Quote from: eth_mining on January 19, 2018, 01:51:40 AM

Can someone tell me if we can run these in a aprtment in the US? I believe we have 125 V 15 A breakers. But the APW++ PSU on bitmain site says that 110 V will only provide 1200 W ourput. Are we SOL? Will the bathroom or kitchen special outlets do any help?

You'll be able to power a single A3 on one of those circuits, but I wouldn't use a single APW3++. I'd go for the EVGA SuperNova 1600 G2 instead. We have a ton of customers who attempted to run the S9 with an APW3++ over 120v circuits and would often experience hashing boards that would just disappear until the next reboot. Moving to 220v circuits almost always fixes the issue permanently. The point is that the APW3++ will still attempt to output the full amount needed by the miner, but the power will likely be less consistent and you'll also be increasing your fire hazard risk. If you insist on using the APW3++, then get 2 of them and run some hashing boards on one and the rest on the other.

Thank you for the quick response. I ordered the APW3++ already along with the A3 Sad

. I am also looking to use a colocation in a couple of weeks so I believe they will be able to accomodate the APW3++? Until then (1 to 2 weeks), I will have to run in my aprtment. Is it risky to run for even a short period of time? Am I risking low hashing and restart once in a while? Or am I risking to kill the miner or burn the house?

Also, can you post a link to a power cord to buy for the APW3++? I have spare ones that came with EVGA 750 BQ psus. One says 105 C 3 x 18 AWG (0.824 mm2) 300V. Other one says 60 C 3/c 18 AWG (0.824 mm2) 300 V. Are they good or bad to use with this?

CryptoCrane

sr. member

Activity: 384

Merit: 256

Quote from: eth_mining on January 19, 2018, 01:51:40 AM

Can someone tell me if we can run these in a aprtment in the US? I believe we have 125 V 15 A breakers. But the APW++ PSU on bitmain site says that 110 V will only provide 1200 W ourput. Are we SOL? Will the bathroom or kitchen special outlets do any help?

You'll be able to power a single A3 on one of those circuits, but I wouldn't use a single APW3++. I'd go for the EVGA SuperNova 1600 G2 instead. We have a ton of customers who attempted to run the S9 with an APW3++ over 120v circuits and would often experience hashing boards that would just disappear until the next reboot. Moving to 220v circuits almost always fixes the issue permanently. The point is that the APW3++ will still attempt to output the full amount needed by the miner, but the power will likely be less consistent and you'll also be increasing your fire hazard risk. If you insist on using the APW3++, then get 2 of them and run some hashing boards on one and the rest on the other.

eth_mining

newbie

Activity: 95

Merit: 0

Can someone tell me if we can run these in a aprtment in the US? I believe we have 125 V 15 A breakers. But the APW++ PSU on bitmain site says that 110 V will only provide 1200 W ourput. Are we SOL? Will the bathroom or kitchen special outlets do any help?

CryptoCrane

sr. member

Activity: 384

Merit: 256

Quote from: euroasiasystems on January 19, 2018, 01:39:20 AM

Quote from: SkyLakeMine on January 19, 2018, 12:36:19 AM

Quote from: euroasiasystems on January 18, 2018, 11:45:29 PM

Shipping within China starts next Tuesday and Chinese users have a big advantage as the rest of the world will need another one week before shipment starts.

Someone is getting theirs on Monday.

https://bitcointalksearch.org/topic/m.28446940

I only can confirm the units we ordered and they said Tuesday. 14 units we resell at around 4300 USD and the other units we keep for our mining ops in Thailand.

How were you able to get around Bitmain's 1/customer limit? Did you simply purchase using multiple accounts or did you purchase from the Chinese site?

euroasiasystems

newbie

Activity: 3

Merit: 0

Quote from: SkyLakeMine on January 19, 2018, 12:36:19 AM

Quote from: euroasiasystems on January 18, 2018, 11:45:29 PM

Shipping within China starts next Tuesday and Chinese users have a big advantage as the rest of the world will need another one week before shipment starts.

Someone is getting theirs on Monday.

https://bitcointalksearch.org/topic/m.28446940

I only can confirm the units we ordered and they said Tuesday. 14 units we resell at around 4300 USD and the other units we keep for our mining ops in Thailand.

SkyLakeMine

member

Activity: 99

Merit: 11

Quote from: euroasiasystems on January 18, 2018, 11:45:29 PM

Shipping within China starts next Tuesday and Chinese users have a big advantage as the rest of the world will need another one week before shipment starts.

Someone is getting theirs on Monday.

https://bitcointalksearch.org/topic/m.28446940

euroasiasystems

newbie

Activity: 3

Merit: 0

Quote from: joae1975 on January 18, 2018, 11:40:39 PM

Quote from: mady_qt on January 18, 2018, 09:25:44 PM

Hey all,
I managed to get 6 from all of my accounts ! Will post how it goes !

Bitmain tried to prevent hoarding but I guess where there's a will there's a way. I don't know how I'd manage to deal with one miner let alone 6. You must have resources. Best of luck.

Sales within China has been sky rocketing with companies in Shenzhen buying a large quantity of A3 stocks.

euroasiasystems

newbie

Activity: 3

Merit: 0

Interestingly the Antminer A3 for the Chinese market seem to only work with Antpool.

Shipping within China starts next Tuesday and Chinese users have a big advantage as the rest of the world will need another one week before shipment starts.

We ordered all our items to be shipped to HK and Macau and ordered 49 units so far with some are up for resale via our website.

Topic: Bitmain just announced the AntMiner A3 - 815GH/s Siacoin miner - Blake(2b) - page 30. (Read 12766 times)