Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 100.

wheelz1200

legendary

Activity: 3752

Merit: 1415

Quote from: drsub on November 02, 2017, 02:30:28 PM

OMG, i feel really bad for everyone that bought this D3.
71 usd a month? Bitmain totally destroyed the market.

I get you point but they hash a little higher and draw a little less power. And dash along with every alt is getting smacked around by the btc bull if/when dash rebounds it will improve.

drsub

sr. member

Activity: 332

Merit: 251

OMG, i feel really bad for everyone that bought this D3.
71 usd a month? Bitmain totally destroyed the market.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Quote from: Maicol792 on November 02, 2017, 01:00:51 PM

Quote from: LiteMine on November 02, 2017, 11:53:02 AM

Anyone know the default frequency for the 1st batch D3?

i think 487

Yes. My first batch Antminer D3 shipped with 487 Mhz setting for the hash board frequency.

DonBit

member

Activity: 69

Merit: 10

Ffs I've placed my order on Sep 29th and it wasn't shipped yet!

Maicol792

legendary

Activity: 1260

Merit: 1010

Quote from: LiteMine on November 02, 2017, 11:53:02 AM

Anyone know the default frequency for the 1st batch D3?

i think 487

davemanet

full member

Activity: 336

Merit: 100

I'm getting my first D3 on Monday from November batch? Anyone want to be friends and help each other set up / troubleshoot? Message me it will be my first antminer.

nick555

newbie

Activity: 9

Merit: 0

Quote from: xxcsu on November 02, 2017, 10:28:59 AM

Quote from: nick555 on November 02, 2017, 10:02:45 AM

At this rate we'll not ROI the import charges alone Grin

Question about the APW++ Do I need to connect it to 220v to have enough power for the D3?

What batch your D3's are from ? Did you get a 15 , 17 or 19 GH/s miner ?
As reported by a few members here on the forum , the 15GH/s version pull under 1000watts , so youshould be ok on 110-120volt.
I think the 17GH/s version should be ok also, those miner are pulling less than 1200watts , the apw3++ rated to 1200 watts on 110volts.
Im not sure about the 19GH/s version ,i have a few those , the power consumption is around 1150-1260 watts for each , so i would not suggest to use it with apw3++ on 110-120 volts.

I didn't receive it yet. I have the coming batch so I don't know what GH/s it will be and I don't know what will be my import charge.
The specs of the apw++ say it cannot output more than 1200 watt on 120v. Is it just because off the wall outlet max safe rating or psu itself?
If I downclock it to 17GH/s for more stability will it take same power than the version at 17GH/s?

LiteMine

sr. member

Activity: 380

Merit: 250

Anyone know the default frequency for the 1st batch D3?

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

For those of you that need a PSU for your Antminer D3 that just got it, I have one APW3++ for sale here https://bitcointalksearch.org/topic/voskcoin-garage-sale-gpu-mining-rigs-and-parts-gpusmobosrampsus-and-asic-2349192

Otherwise parallelminer has good d3 PSUs
https://goo.gl/9p8uMk

Server PSU for 1 d3
https://goo.gl/SJjNTb

Server PSU for powering 2x d3
https://goo.gl/dcKRM8

Chan8

sr. member

Activity: 378

Merit: 250

Quote from: parker423 on November 02, 2017, 09:36:50 AM

Hi,

I received the D3 but not my APW.

My APW is on the invoice but I had just 1 trackinglink for the D3.

Anyone had the same problems?

When will I receive the APW?

Yeah its normal for bitmain to do sht like that.. they sometimes send out the miners first, and the psu would come after that.. so you should be expecting to recieve your shipping information cor the apw3++ very shortly.
I also had miners sent to me and wait for the psu to be shipped, most the time is within a week from each other, so shouldnt be too long of a wait for you.

DebitMe

legendary

Activity: 2800

Merit: 1012

Get Paid Crypto To Walk or Drive

Quote from: xxcsu on November 02, 2017, 10:28:59 AM

Quote from: nick555 on November 02, 2017, 10:02:45 AM

At this rate we'll not ROI the import charges alone Grin

Question about the APW++ Do I need to connect it to 220v to have enough power for the D3?

What batch your D3's are from ? Did you get a 15 , 17 or 19 GH/s miner ?
As reported by a few members here on the forum , the 15GH/s version pull under 1000watts , so youshould be ok on 110-120volt.
I think the 17GH/s version should be ok also, those miner are pulling less than 1200watts , the apw3++ rated to 1200 watts on 110volts.
Im not sure about the 19GH/s version ,i have a few those , the power consumption is around 1150-1260 watts for each , so i would not suggest to use it with apw3++ on 110-120 volts.

1260 watts is fine on a 110-120 volt outlet. You should stay under 80% of the max load on a normal US outlet, which would be 1440 watts.

xxcsu

hero member

Activity: 1498

Merit: 597

Quote from: nick555 on November 02, 2017, 10:02:45 AM

At this rate we'll not ROI the import charges alone Grin

Question about the APW++ Do I need to connect it to 220v to have enough power for the D3?

What batch your D3's are from ? Did you get a 15 , 17 or 19 GH/s miner ?
As reported by a few members here on the forum , the 15GH/s version pull under 1000watts , so youshould be ok on 110-120volt.
I think the 17GH/s version should be ok also, those miner are pulling less than 1200watts , the apw3++ rated to 1200 watts on 110volts.
Im not sure about the 19GH/s version ,i have a few those , the power consumption is around 1150-1260 watts for each , so i would not suggest to use it with apw3++ on 110-120 volts.

jchi2210

full member

Activity: 442

Merit: 105

Quote from: nick555 on November 02, 2017, 10:02:45 AM

At this rate we'll not ROI the import charges alone Grin

Question about the APW++ Do I need to connect it to 220v to have enough power for the D3?

How much were your import charges? I ordered 9 that are currently shipping through UPS.

nick555

newbie

Activity: 9

Merit: 0

At this rate we'll not ROI the import charges alone Grin

Question about the APW++ Do I need to connect it to 220v to have enough power for the D3?

Embeco

member

Activity: 82

Merit: 13

I am actually surprised ROI is still that high. Should be able to break even within 6-12 months which is still alright IMHO.
Still hoping difficulty won't rise too much within the next weeks, though...

parker423

full member

Activity: 658

Merit: 101

Hi,

I received the D3 but not my APW.

My APW is on the invoice but I had just 1 trackinglink for the D3.

Anyone had the same problems?

When will I receive the APW?

blissz

sr. member

Activity: 336

Merit: 258

Quote from: PsKminer on November 02, 2017, 04:07:20 AM

I've just received my D3 and after 2 days of working it produced only 0.02 DASH, that's terrible, ROI impossible.

I'm getting a lot of discarded jobs as you can see here :

https://imgur.com/a/4zt8H

Is it normal?.

I have the same, not sure if it's normal though... Anyone that can confirm this? Maybe good to mention the batch and the firmware version as well.
I have the same issue on an October batch, flashed with the september firmware

PsKminer

member

Activity: 118

Merit: 11

I've just received my D3 and after 2 days of working it produced only 0.02 DASH, that's terrible, ROI impossible.

I'm getting a lot of discarded jobs as you can see here :

https://imgur.com/a/4zt8H

Is it normal?.

Searing

copper member

Activity: 2898

Merit: 1465

Clueless!

My D3 Nov 1-15th miner has shipped. As stated in a previous post I'm pretty sure mine was the last of this batch in that due to a fluke
of a conversation and a buddy refreshing page...for giggles as we talked...I got one 1.5 hours after the auction wrapped up ....

Anyway, pretty sure I'm the last of this batch. Just an FYI.

mzeoatrakeb

newbie

Activity: 25

Merit: 0

Hello guys, Antminer D3 or s9 about 45 PCS how many power KV needs? 50KV? 60KV?

Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 100. (Read 299686 times)