Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 122. (Read 299754 times)

such numbers in the USA are our soc sec number as a private individual or a biz number of some kind

call them up, I suspect it is something like that..they just want to track it to you as an individual..

when I got such calls ...all I had to do is prove I was me in the above manner, and address, phone number and usually they had a fee involved (sigh)

good luck.not sure how this applies in France ..but how it works in my part of USA

not so sure the warranty matters much at this point in time...IF you want to ROI and say a board goes out...and it takes a month or more
it is all moot probably by that time...due to difficulty vs price

The only way I'll send anything in..is like say on day 172 out of my 180 day warranty..just for the frack of it

I mean, its always possible price could revive the equip at that point (look at how many A2's got turned back on after 1 year due to this years

price pump from 4.15 ltc to 50 buck ltc)

but, long odds on fixing this stuff and a long turn around


Also, all bitmain stuff is OC'd imho, it is just where they start the process...ie 15gh was the spec...and suddenly they got 17.5 gh out of it and informed us of such

ie....just 0C'd because they considered it 'stable' ..it may be for some folk....but ..imho ...it really was made for 15gh....or so I tell myself getting only 16gh vs the 17.5gh

folk may get besides me now

it is an old asic mnfg game....knc did it ....was designed at 250mh  for their titan knc scrypt miners.....late to arrive..so they overclocked it to 300mh...then dies were bad
and they had a warranty of returns if less than 300mh....

so they overclocked them again by upgrading the firmware (you could not previously do this...they stated anything over 300mh voided warranty)

funny a firmware fix got them out of the hole...not having to meet their 300mh stable warranty requirements with these tricks

it was so bad that the voltage plug that burns out on titan cubes was beyond specs for voltage when all was said and done ..thus the knc y adapter needed

anyway, my view..it was designed for 15gh ...I ordered thinking it was 15gh ..they say it is now 17.5gh ..I get 16gh .....got to take this all with a grain of salt

if you get 17.5 more power to you...but I bet just as many get less than that as get the spec of 17.5gh

again, imho

I have a problem with Fedex France
This message is from Fedex tracking number
What should I do?
https://s1.postimg.org/3ylnwrylkf/Fire_Shot_Capture_2_-_Track_your_package_or_shipm_-_https_www.png

Quite stupid if i lose my warrenty if i gone underclock the miner

More stupid are duane employes that has a slite of jalousy and over taxs.

did you get the shipping info per mail or only you see it in your bitmain account?

Bitmain sometimes ship ahead !     My past few orders were all shipped either a few days ahead or on time.  

Does anybody have link for the PSU of November batch? I got one faulty and I want to have one spare.

Wow I envy you

Actually they needed to rise the voltage for it to be stable at 19.5Gh, its not the FW. It's possible to do it, but guarantee is def over is you damage the sticker.

The first batch was not overclocked. I'm getting really good temps on it and I don't have the perfect environment.

pardon where did they announce about 19Ghs ?

 

Looking ugly. Using this calc I get $21.59 per day now.

 This is before the next equip dumps. Also, this is at 17.5gh and 12c kWh.

https://www.coinwarz.com/calculators/dash-mining-calculator/?h=17500&p=950.00&pc=0.12&pf=0.00&d=8264827.90405388&r=1.80147602&er=0.04741668&btcer=5932.68760000&hc=0.00

gonna be looking at 10 bucks a day soon.....this sucks.....


On a side note....is this now the strategy a person uses with Bitmain OVERCLOCKING their D3's and/or other equip?

Bitmain states: 17.5gh from 15gh.

You Ignore: 15gh original specs is what you run it at really.

Bitmain states: 19.2gh from 17.5gh.

You Ignore: 17.5gh original specs is what you run it at really.

Seems to be the trend, imho, Bitmain being "evil" and all

*currently barely keeping my D3 Bitmain spec'd at 17.5gh running at 16gh.


edit: perhaps there is a newer firmware patch I'm not aware of past the Sept date on mine?

19.3 Ghz model is insane temp. Ambient temp 25c Chip temp about 75-83c .

Is that ok ?

I'm using Bitmain's PSU with my D3 and it takes 1000W

That's good that DHL will accept the screenshot and the email. Depends on the guy you talk to though. Plus I have my own customs agent? Is that how he's called? So it's not gonna be DHL that clears the customs for me.
I didn't get the email with the invoice either. I made a ticket to bitmain about it but it's weekend.

But that last part is the easiest thing. I just give them the TARIC codes. They can't keep interrogating you what it is after that. If you want DHL to handle the customs. Like I mentioned, personally I don't want them to.

That should not be a problem. DHL and UPS both asked me for a real invoice and I simply send them a screenshot of the order page and forwarded the email I received after the purchase. That in most cases should be enough.

I also got asked what it is... Took them another 2 days to clear that question lol

My 2 friends received their shipping notices. Not me though .

Yes, PSU with >1200W , but make sure it has 10 pci-e connectors not 9!!!. (9pci-e for hashboards + 1pci-e for controler)

Actually just make a screenshot from bitmain site order details, thats enough in EU.

I don't think customs will believe a 22k shipping cost for 5kg. They'll know it's an error when they contact you. Atleast for Europe.

I myself haven't even got an invoice and I can't clear customs without it! I contacted bitmain about it and they're all probably out for the weekend and I hope Monday they respond with one and not some kind of bot message.