Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 139.

Bibi187

full member

Activity: 420

Merit: 106

https://steemit.com/@bibi187

Quote from: digital$ on October 11, 2017, 07:21:04 AM

Quote from: thiec on October 11, 2017, 07:05:52 AM

Quote from: micairvas on October 11, 2017, 05:02:54 AM

Quote from: Bibi187 on October 10, 2017, 07:46:24 AM

Quote from: CryptoGuu on October 10, 2017, 07:09:04 AM

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

got the same problem with mine. Would appreciate some infos.

I think is a common issue ...

I have this problem to, it happen sometime after some days.

I update firmware, reset hardware etc ... Nothing fix this issue, he just happen.

Other problem i get, on one of my D3, on board get error on launch like they cant reach correct submitted work, it chain 40-50 HW error and show some xxx on this board.

After 1 minute, board launch like is ok, remove all xxx and accept submitted work.

Tried this firmware? https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E

Is it upgrading or changing firmware without bitmain's permission will void the warranty?

any firmware update has to be "bitmain" firmware..ie. they release new version and you update(then all is good) only firmware by bitmain can be used if under warranty. upgrade?? any other means of upgrade will void warranty

If you stay on firmware provided by Bitmain not problem at all Wink

I already use this version @micairvas

Is not temp related i assume, i get only one board doing hw error sometime, and only when i connect to pool, after everything running fine ...

Same for xxxx xxxx happening sometime, if from same board ALWAYS and is clearly not the hot one.

dashdash

newbie

Activity: 9

Merit: 0

Quote from: mdude77 on October 11, 2017, 07:24:25 AM

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

It's always risky getting batch one items from Bitmain. They don't have a stellar reputation for the first batch working the greatest.

M

I think the first earnings on the D3's more than compensated for that Grin

rex9

member

Activity: 112

Merit: 10

seem like very good

BenRickert

full member

Activity: 420

Merit: 110

Quote from: AriesIV10 on October 11, 2017, 01:38:19 AM

Quote from: CryptoDj on October 10, 2017, 06:01:46 PM

Hello Guys,

someone can recommend me a PSU for the D3 since I could not buy mine in bitmain with my order.

This is where I buy some of my PSUs:

www.parallelminer.com

They are reliable and have a good lead-time.

This is an EXTREMELY USEFUL link. THANK YOU! Crypto Accepted.

Mr_Snipes

full member

Activity: 280

Merit: 100

regarding these outages some of you have: i had it once as the ambient temp in the romm hit ~26C°
Chiptemp was 70C° to 72C° when i had this issue. So i manually set the fan to 100% - had no problems since that fix.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

It's always risky getting batch one items from Bitmain. They don't have a stellar reputation for the first batch working the greatest.

M

digital$

member

Activity: 287

Merit: 18

Quote from: thiec on October 11, 2017, 07:05:52 AM

Quote from: micairvas on October 11, 2017, 05:02:54 AM

Quote from: Bibi187 on October 10, 2017, 07:46:24 AM

Quote from: CryptoGuu on October 10, 2017, 07:09:04 AM

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

got the same problem with mine. Would appreciate some infos.

I think is a common issue ...

I have this problem to, it happen sometime after some days.

I update firmware, reset hardware etc ... Nothing fix this issue, he just happen.

Other problem i get, on one of my D3, on board get error on launch like they cant reach correct submitted work, it chain 40-50 HW error and show some xxx on this board.

After 1 minute, board launch like is ok, remove all xxx and accept submitted work.

Tried this firmware? https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E

Is it upgrading or changing firmware without bitmain's permission will void the warranty?

any firmware update has to be "bitmain" firmware..ie. they release new version and you update(then all is good) only firmware by bitmain can be used if under warranty. upgrade?? any other means of upgrade will void warranty

thiec

hero member

Activity: 854

Merit: 502

Quote from: micairvas on October 11, 2017, 05:02:54 AM

Quote from: Bibi187 on October 10, 2017, 07:46:24 AM

Quote from: CryptoGuu on October 10, 2017, 07:09:04 AM

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

got the same problem with mine. Would appreciate some infos.

I think is a common issue ...

I have this problem to, it happen sometime after some days.

I update firmware, reset hardware etc ... Nothing fix this issue, he just happen.

Other problem i get, on one of my D3, on board get error on launch like they cant reach correct submitted work, it chain 40-50 HW error and show some xxx on this board.

After 1 minute, board launch like is ok, remove all xxx and accept submitted work.

Tried this firmware? https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E

Is it upgrading or changing firmware without bitmain's permission will void the warranty?

micairvas

full member

Activity: 303

Merit: 105

Quote from: Bibi187 on October 10, 2017, 07:46:24 AM

Quote from: CryptoGuu on October 10, 2017, 07:09:04 AM

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

got the same problem with mine. Would appreciate some infos.

I think is a common issue ...

I have this problem to, it happen sometime after some days.

I update firmware, reset hardware etc ... Nothing fix this issue, he just happen.

Other problem i get, on one of my D3, on board get error on launch like they cant reach correct submitted work, it chain 40-50 HW error and show some xxx on this board.

After 1 minute, board launch like is ok, remove all xxx and accept submitted work.

Tried this firmware? https://shop.bitmain.com/support.htm?pid=00720170915192851224mJ36J1ap066E

lashatatu

full member

Activity: 155

Merit: 100

Quote from: ?? on ??

can this be used to mine any coin with any algo?

any coin on x11 algo

Maicol792

legendary

Activity: 1260

Merit: 1010

hi, anyone mining dash in solo on nicehash? ... what is the best _diff value?? for D3 miner? thanks

AriesIV10

legendary

Activity: 1260

Merit: 1006

Mine for a Bit

Quote from: CryptoDj on October 10, 2017, 06:01:46 PM

Hello Guys,

someone can recommend me a PSU for the D3 since I could not buy mine in bitmain with my order.

This is where I buy some of my PSUs:

www.parallelminer.com

They are reliable and have a good lead-time.

digital$

member

Activity: 287

Merit: 18

hoping this is a firmware issue...perhaps bitmain are aware of the problem hence upgrade/update. thanks for posting and hope its resolved soon

kodokbuduk

full member

Activity: 294

Merit: 100

Quote from: Tai_Pan on October 10, 2017, 01:18:15 PM

Quote from: Bibi187 on October 10, 2017, 09:17:24 AM

Quote from: Tai_Pan on October 10, 2017, 08:15:40 AM

Can someone who updated the firmware post here a screen shot from the dashboard's "system \ overview" please?

Thank you.

You doubt about people do this upgrade ?

It seems safe to do since is a official release.

Here is your screenshot, IP is hyde.

Thanks.
I don't doubt anyone, I just wanted to see the numbers / the versions and so on

my hardware ver 1.0.0.6

kodokbuduk

full member

Activity: 294

Merit: 100

Quote from: CryptoGuu on October 10, 2017, 07:09:04 AM

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

got the same problem with mine. Would appreciate some infos.

Yea same. Anyone upgraded firmware and solve the problem?

shaninium

sr. member

Activity: 489

Merit: 253

Quote from: micairvas on October 10, 2017, 02:05:20 AM

Does anyone have problem when some miners losing 3rd board and hashing 10-11 Ghs? This happens on many D3 miners, not just on one.
Miners works on default settings, temperatures are good, max board temperatures are 65-70C. After I restart D3, all boards working normally again for some time.
Is there some firmware upgrade for this problem, anyone have solution for this?
D3 is not stable miner at all. L3+ is a lot better device.

I have same problem here even after firmware update unless there's been a new update in past week.

CryptoDj

newbie

Activity: 12

Merit: 0

Hello Guys,

someone can recommend me a PSU for the D3 since I could not buy mine in bitmain with my order.

RealKariverson

full member

Activity: 233

Merit: 100

Quote from: Tai_Pan on October 10, 2017, 08:15:40 AM

Can someone who updated the firmware post here a screen shot from the dashboard's "system \ overview" please?

Thank you.

What they did with my l3+ back in July was an email some days before shipping for shipping confirmation. Then an email that it shipped with a commercial invoice attached. About VAT, when it arrives, you have to talk to your customs office and/or the courier service.

Has anyone gotten shipping confirmation for October 15th?

Dopert

full member

Activity: 350

Merit: 100

Yup, like said, 2 bullets in the chamber, but i purchashed 4x for november batch. Presold 3x and get 0.45 deposit. Hope he will make no trouble if diffc. Gose up more. I hold 1 to play, maybe mine a little x11 coin for the hold and pray Grin

VoskCoin

sr. member

Activity: 1414

Merit: 487

YouTube.com/VoskCoin

Quote from: bytiges on October 10, 2017, 11:22:27 AM

Quote from: VoskCoin on October 10, 2017, 10:28:45 AM

Quote from: BenRickert on October 10, 2017, 10:21:36 AM

Quote from: VoskCoin on October 10, 2017, 09:23:04 AM

Can anyone give me a link to their D3 mining on nicehash? pref just 1 d3?

Here ya go Amigo;

https://www.nicehash.com/asic-mining

well I wanted a specific wallet address I could watch like this https://www.nicehash.com/miner/12PsgKuhcJrEqJbD3oMN7rcEcuyqyqRznL / I could verify stock d3 settings

So, is your girlfriend mining on another pool ? Which one ? How are earnings ?

Personally I / we are worried about the rising diff so unfortunately we decided to sell the D3's - I think the outlook is grim O_O

Topic: Bitmain looks like they're releasing a 15GH/s DASH miner called the AntMiner D3 - page 139. (Read 299754 times)