Hello
I have this fans
Silverstone Tek 140mm x 38mm Fan for CPU Cooler and Computer Cases Cooling FHP-141
but Antminer on 350 mhz have the 75-78C temeperature
More overclocking is impossible
but the sound is much less
but the room quickly heated as the air coming out is much hotter
Topic: Bitmain S5 Replacement Fan - page 4. (Read 4667 times)
you can try these fans for me it works well
http://www.amazon.com/gp/product/B00A460TK6?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 as pull this one as push http://www.amazon.com/gp/product/B004Y1HLA8?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
so far on hot day here i don't go over 59 C per blade at defaults i really don't OC so don't know how it would handle it. and the sound is not to bad you can actually sleep in the same room with those fans on one S 5.
THere right i have one of the TFC1212DE the S5 can't power it up but the one i linked they do Np and usually run at 2700 RPMS or lower depending you surrounding hottest Ive seen one blade get was 60 C but I fixed that i blow out the fins with a wet.dry vac and re pasted all the broads which dropped all my S 5 at least 2 to 3 degrees each . but not every one get the same results.
http://www.amazon.com/gp/product/B00A460TK6?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00 as pull this one as push http://www.amazon.com/gp/product/B004Y1HLA8?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00
so far on hot day here i don't go over 59 C per blade at defaults i really don't OC so don't know how it would handle it. and the sound is not to bad you can actually sleep in the same room with those fans on one S 5.
THere right i have one of the TFC1212DE the S5 can't power it up but the one i linked they do Np and usually run at 2700 RPMS or lower depending you surrounding hottest Ive seen one blade get was 60 C but I fixed that i blow out the fins with a wet.dry vac and re pasted all the broads which dropped all my S 5 at least 2 to 3 degrees each . but not every one get the same results.
Thank you kindly for the information but I am looking for specifics. Current Model, Current Model CFM, Where to Purchase Current Model.
Everything that I have seen about replacing the with a different model has lead to higher temperatures. Is this the case or have I been reading the wrong posts?
Everything that I have seen about replacing the with a different model has lead to higher temperatures. Is this the case or have I been reading the wrong posts?
TFC1212DE Needs an external Power and can't come off that riser on the control board as its a 4amp fan... but it also pushes 255Cubic Feet/Min
Thank you kindly for the information but I am looking for specifics. Current Model, Current Model CFM, Where to Purchase Current Model.
Everything that I have seen about replacing the with a different model has lead to higher temperatures. Is this the case or have I been reading the wrong posts?
Everything that I have seen about replacing the with a different model has lead to higher temperatures. Is this the case or have I been reading the wrong posts?
as the fans are the best noctua industrial, they fit well to controller S5, but they cost too much, despite being the quietest,
then there are the Delta, but there are different models, do not buy TFC1212DE, because the controller does not support them, you have to assess well in that area are, if it's hot, and temperatures are high.
for fans of the stock of bitmain not even know what brand they are, I only know that they do a lot of noise 74/76 DB,
then there are the Delta, but there are different models, do not buy TFC1212DE, because the controller does not support them, you have to assess well in that area are, if it's hot, and temperatures are high.
for fans of the stock of bitmain not even know what brand they are, I only know that they do a lot of noise 74/76 DB,
I have 3 questions...
1. What is the model of the fan that comes installed by default on Bitmain's Antminer S5?
2. Where can I get this model fan?
3. Is there a different model fan that is better? (ie. Either pushes more air or pushes the same amount of air more quietly)
1. What is the model of the fan that comes installed by default on Bitmain's Antminer S5?
2. Where can I get this model fan?
3. Is there a different model fan that is better? (ie. Either pushes more air or pushes the same amount of air more quietly)
Jump to: