Pages:
Author

Topic: Bitmark - page 65. (Read 622228 times)

legendary
Activity: 826
Merit: 1002
amarha
February 24, 2015, 02:21:06 PM
yesterday i sent some BTM from polo to trex, after 24 hours it still has only 1/6 confirmations? what's up with the blockchain? or is bittrex responsible for that delay?

No, that's just the network being slow due to the high difficulty and low hashrate at the moment. Sorry for the inconvenience, but it will confirm eventually.
sr. member
Activity: 338
Merit: 250
February 24, 2015, 02:16:47 PM
yesterday i sent some BTM from polo to trex, after 24 hours it still has only 1/6 confirmations? what's up with the blockchain? or is bittrex responsible for that delay?
legendary
Activity: 840
Merit: 1000
February 24, 2015, 07:26:42 AM
What's promising about this? You can tip people everywhere nowadays. Together with the lack of community and problems.

Better take a look at other coins.
hero member
Activity: 616
Merit: 500
February 23, 2015, 03:23:27 PM
Buying bitmark at these prices is truly a gift! Thank you! Most promising crypto project imho. I see lots of good work beeing done here!
hero member
Activity: 686
Merit: 500
February 23, 2015, 11:47:27 AM
Damn, price still sucks. Sorry to say this, but i'm happy that i dumped.

Glad you dumped too  Grin

Yeah dump some more on poloniex, I am buying to  Smiley
full member
Activity: 156
Merit: 100
February 23, 2015, 11:31:09 AM
Damn, price still sucks. Sorry to say this, but i'm happy that i dumped.

Glad you dumped too  Grin
sr. member
Activity: 294
Merit: 250
Bitmark Developer
February 22, 2015, 07:12:17 PM
I downloaded the new 0.9.4 wallet and but I'm not able to able to sync to the network as I get the message 'No Block Source Available' and the blockchain is not downloading. How do I get this issue fixed?

I will investigate this, perhaps a misconfigured DNS seeder on our side.

Please leave the client open, after a few minutes it should time out and connect to one of the master seed nodes to get peers.

If all else fails, as a temporary measure entering addnode vps.bitmark.co onetry in the console (Help -> Debug Window -> Console) should get you going.

I'll update once the issue is found and fixed.
newbie
Activity: 47
Merit: 0
February 22, 2015, 04:53:59 PM
I downloaded the new 0.9.4 wallet and but I'm not able to able to sync to the network as I get the message 'No Block Source Available' and the blockchain is not downloading. How do I get this issue fixed?
legendary
Activity: 840
Merit: 1000
February 20, 2015, 09:46:58 AM
Damn, price still sucks. Sorry to say this, but i'm happy that i dumped.
member
Activity: 98
Merit: 10
GlideSEC - www.glidesec.com
February 18, 2015, 11:53:10 PM
solid team involved in this project!
full member
Activity: 247
Merit: 100
February 18, 2015, 09:35:17 PM
New Bitmark QT is Synced & Good to Go!
  - Thanks Mark
sr. member
Activity: 294
Merit: 250
Bitmark Developer
February 18, 2015, 04:10:57 PM
What's going on here?  http://bitmark.co:3000/

Are there two block 46541s?

I'll set it to resync later on today which will remove the duplicate.

Complete
sr. member
Activity: 294
Merit: 250
Bitmark Developer
February 18, 2015, 03:50:11 PM
What's going on here?  http://bitmark.co:3000/

Are there two block 46541s?

I'm trying to sync new wallet but it stops at that block.

Just a nuance after updating Insight, it's pulled in the same block twice; note: same hash.  I'll set it to resync later on today which will remove the duplicate.

Regarding synchronizing the new wallet, if it's at the same block height then it is synchronized, although the time past since the last block found (slow network!) may lead the UI to indicate it's not synchronized, when it in fact is.
sr. member
Activity: 438
Merit: 250
February 18, 2015, 02:59:27 PM
What's going on here?  http://bitmark.co:3000/

Are there two block 46541s?

I'm trying to sync new wallet but it stops at that block.
full member
Activity: 247
Merit: 100
February 18, 2015, 02:49:12 PM
Update

Bitmark 0.9.4 is released, full builds for Linux, Windows, and OSX can be found on v0.9.4 Release
Pfennig 0.9.4 is on GitHub.
Pfennig 0.9.4 with KGW Support is also on GitHub.
Bitcore 0.10.3 is ready to use and available here.
Insight, and Insight API
You can also find a new bitmark-seeder on GitHub.

All master nodes have been updated, as has the official block explorer.

The network now has active DNS Seeds which all prior releases, and this release, will use with immediate effect.

The next release of Bitmark will be 0.10 in late March, or as soon as a suitable new difficulty algorithm has been identified, implemented, and tested.

 
Awesome!

Mark - Your commitment to this Bitmark / Marking is truly inspirational...Thank You! We would not be on the cusp of overwhelming success, if it was not for you and the great team we have with us. 

Also thanks to Leathan, Androidicus, Amarha, ubiquitous, Pablo, and the many more members that shall emerge to collaborate with us as our system matures
legendary
Activity: 826
Merit: 1002
amarha
February 18, 2015, 01:54:30 PM
Update

Bitmark 0.9.4 is released, full builds for Linux, Windows, and OSX can be found on v0.9.4 Release
Pfennig 0.9.4 is on GitHub.
Pfennig 0.9.4 with KGW Support is also on GitHub.
Bitcore 0.10.3 is ready to use and available here.
Insight, and Insight API
You can also find a new bitmark-seeder on GitHub.

All master nodes have been updated, as has the official block explorer.

The network now has active DNS Seeds which all prior releases, and this release, will use with immediate effect.

The next release of Bitmark will be 0.10 in late March, or as soon as a suitable new difficulty algorithm has been identified, implemented, and tested.

Great to see. Smiley

Thanks.
sr. member
Activity: 294
Merit: 250
Bitmark Developer
February 18, 2015, 12:51:21 PM
Update

Bitmark 0.9.4 is released, full builds for Linux, Windows, and OSX can be found on v0.9.4 Release
Pfennig 0.9.4 is on GitHub.
Pfennig 0.9.4 with KGW Support is also on GitHub.
Bitcore 0.10.3 is ready to use and available here.
Insight, and Insight API
You can also find a new bitmark-seeder on GitHub.

All master nodes have been updated, as has the official block explorer.

The network now has active DNS Seeds which all prior releases, and this release, will use with immediate effect.

The next release of Bitmark will be 0.10 in late March, or as soon as a suitable new difficulty algorithm has been identified, implemented, and tested.
sr. member
Activity: 294
Merit: 250
Bitmark Developer
February 17, 2015, 06:01:24 PM

Pfennig 0.9.4 is released.  There is also a branch with KGW support.
full member
Activity: 247
Merit: 100
February 17, 2015, 05:52:52 PM
What was decided from meeting any timelines or more stall?

FYI: Stalling --> NO

We have transparently identified the resources we need as the project moves forward.

We have reached out to the community for assistance with the identified requirements.
legendary
Activity: 826
Merit: 1002
amarha
February 17, 2015, 02:23:58 AM
What was decided from meeting any timelines or more stall?

Quote
markpfennig: I'll share in more details shortly, for now they can be summarized as:

[23:10] markpfennig: On Bitmark Core
1. Liaise with Leathan to get 2 DNS Seeders for the Bitmark Network Running
2. Add (1) to Bitmark Core
3. Finish Bitmark 0.9.4 release, cross compile, and publish on Friday.
4. Patch Block Explorer to latest version

[23:11] markpfennig: On Marking Layer
1. Setup GOLD server to store marking data
2. Hook in the Marking Button prototype to store markings on (1)
3. Hook in Markus to store markings on (1)

[23:11] markpfennig: On MUWA Layer
1. Work with @amarha and @alex to get that project underway and being developed.

[23:12] markpfennig: Those are my personal deliverables for the coming week, which are realistic, on point, and measurable.

[23:12] markpfennig: For the community, I'd like to see

[23:14] markpfennig: 1. bitmark.co website handed off to somebody who can "own" that, we have most elements and text in different resources already, templates done, it just need text put in to templates.
2. Make a document or wiki page of example marking usage, we've had hundreds of examples, want them documented somewhere
3. Identify 3 -4 end to end use cases to implement and use for testing.

Getting these projects started this week.
Pages:
Jump to: