Bitminter client (Windows/Linux/Mac) - page 18.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: SPooks753 on January 09, 2014, 11:29:19 AM

In my search of solutions to the almost the same issue than you for the U1, I found a nice little app from Karin on this same forum.
https://bitcointalksearch.org/topic/m.2755592
It allows to activate or deactivate those drivers without needing to uninstall or reinstall them.

You are correct - that is indeed a great tool for turning the VCOM drivers on and off.

However, the AntMiner U1 is still not going to work right until there is proper support written. All of those invalid nonce errors are because there is no proper support yet. About 36% of the hardware performance is being wasted.

SPooks753

newbie

Activity: 20

Merit: 0

Hey Chopstick,

In my search of solutions to the almost the same issue than you for the U1, I found a nice little app from Karin on this same forum.
https://bitcointalksearch.org/topic/m.2755592
It allows to activate or deactivate those drivers without needing to uninstall or reinstall them.
It's working for me for now on...

chopsticks

member

Activity: 91

Merit: 10

*bamf!* you've just been eaten by a gr00.

Quote from: nwoolls on January 08, 2014, 02:11:38 PM

If DrHaribo has not added AntMiner U1 support than it is likely that you are not getting full performance. My guess would be that about 33% of the shares are errors. The AntMiner U1 is recognized as a Block Erupter (Icarus device) but has small but important differences that must be taken into account to avoid errors.

Thank you.

I uninstalled the drivers as per the directions found at --
http://edvoncken.net/2011/11/uninstalling-the-silicon-labs-cp210x-usb-to-serial-driver/

and I'll keep researching other options to get my U1 Antminer mining. I have access to lots of PCs I just wanted to do it on my Macbook.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: chopsticks on January 08, 2014, 04:13:38 AM

I have the Antminer U1 running fine on my Macbook PRO as soon as I download the driver for it. :O
Been running for 24 hours now. Quite successfully. 1.6 GH/s is what its supposed to be. I have it running around 1557 MH/s all day with the BitMinter Java client (OS X 10.9.1 on the MacBook PRO). Same Antminer only worked at 300 MH/s in the Asteroid client for Mac. BitMinter Java client was the first one that rocked at full speed once I had the driver installed.

I did see a lot of similar errors in the log as to what DarkHunter04 reported. Turned off viewing the log and just continued mining. Ignorance is bliss?

http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

If DrHaribo has not added AntMiner U1 support than it is likely that you are not getting full performance. My guess would be that about 33% of the shares are errors. The AntMiner U1 is recognized as a Block Erupter (Icarus device) but has small but important differences that must be taken into account to avoid errors.

overunity

full member

Activity: 198

Merit: 100

I was thinking about antminer but wanted to make sure they work with bitminter first .

Did you just download that driver and plug it in and it got detected ?

chopsticks

member

Activity: 91

Merit: 10

*bamf!* you've just been eaten by a gr00.

Quote from: DrHaribo on January 07, 2014, 06:40:53 PM

Quote from: DarkHunter04 on January 07, 2014, 03:32:29 PM

Hey guys

ive a question - when will the Bitminter Client official support Antminer u1? I can use him, but with a short delay because of selftest error

No, sorry, no Antminer support yet. Hope to add it for a later version though.

I have the Antminer U1 running fine on my Macbook PRO as soon as I download the driver for it. :O
Been running for 24 hours now. Quite successfully. 1.6 GH/s is what its supposed to be. I have it running around 1557 MH/s all day with the BitMinter Java client (OS X 10.9.1 on the MacBook PRO). Same Antminer only worked at 300 MH/s in the Asteroid client for Mac. BitMinter Java client was the first one that rocked at full speed once I had the driver installed.

I did see a lot of similar errors in the log as to what DarkHunter04 reported. Turned off viewing the log and just continued mining. Ignorance is bliss?

http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: DarkHunter04 on January 07, 2014, 03:32:29 PM

Hey guys

ive a question - when will the Bitminter Client official support Antminer u1? I can use him, but with a short delay because of selftest error

No, sorry, no Antminer support yet. Hope to add it for a later version though.

DarkHunter04

member

Activity: 126

Merit: 11

Hey guys

ive a question - when will the Bitminter Client official support Antminer u1? I can use him, but with a short delay because of selftest error

Thanks for answer

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: iamphoenix on January 05, 2014, 04:19:55 AM

is there any way u guys can make a SCRYPT mining platform similar to this.. is there one already out there??

I may add support for that. We'll see.

iamphoenix

sr. member

Activity: 244

Merit: 250

is there any way u guys can make a SCRYPT mining platform similar to this.. is there one already out there??

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: elitemobb on January 02, 2014, 07:10:24 PM

Getting Communication error http status code 500 on 1.4.3

The data center where our mining server is hosted appears to be
completely down. It's being worked on. Updates will follow on twitter,
facebook, google+ and bitcointalk.

Apologies for the downtime.

elitemobb

full member

Activity: 579

Merit: 102

Getting Communication error http status code 500 on 1.4.3

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: d-angel2001 on January 01, 2014, 12:56:16 PM

Thanks for the answer. Can you also tell me how the "shift" influences my personal earnings? Will I loose some of my personal minings having less efficient hardware vs. users having more expensive hardware?

Some info here: https://bitcointalksearch.org/topic/m.2769824

d-angel2001

newbie

Activity: 137

Merit: 0

Quote from: railzand on January 01, 2014, 12:23:28 PM

Quote from: d-angel2001 on January 01, 2014, 09:14:08 AM

I have a question regarding Bitminter Client. I am currently mining with 2 Block Erupters having a total of about 660 MH/s. My Client has been running for 5 days now shoing up I've earned 00058592 BTC Coins (or are this blocks?!)

In Bitminter login it is showing up that my total earnings are like this:

Quote

Personal Assets    Balance      Unconfirmed    Future      Expected per block
Bitcoins      0.00227229    -      0.00227229    0.00003750
Namecoins      0.00717448    -      0.00717448    0.00007501

I feel like there's some difference between my client earnings and those showing up here? Or is it because I missunderstand something between the two statistical numbers in client and my bitminter login?

I also would be glad to know what exactly the shift feature (https://bitminter.com/shifts) is meaning to me and my earnings. Do I have to share my earnings because I am earning "less" compared to other miners with better hardware?

By side... currently Bitminter is mining BTC and NMC which are both Sha256 based currencies. Wouldn't it make sense to cross-mine other Sha256 currencies as well even if they are not as successful as BTC/NMC yet? As far as I know BTC/NMC Mining works somehow without much more extra calculation efford...

I had a look to this list showing up other SHA256 Crypto-Currencies...
http://en.wikipedia.org/wiki/List_of_cryptocurrencies

figure 00058592 will probably be number of shares accepted since you started client. shares are your own contribution as a proportion of all. client doesn't show btc earnings.

merged mining with namecoin indeed takes no or v little more effort. not all sha256 coins can be merge mined with btc. the ones that can are useless/scams/painintheasss

Thanks for the answer. Can you also tell me how the "shift" influences my personal earnings? Will I loose some of my personal minings having less efficient hardware vs. users having more expensive hardware?

railzand

sr. member

Activity: 462

Merit: 250

Lux e tenebris

Quote from: d-angel2001 on January 01, 2014, 09:14:08 AM

I have a question regarding Bitminter Client. I am currently mining with 2 Block Erupters having a total of about 660 MH/s. My Client has been running for 5 days now shoing up I've earned 00058592 BTC Coins (or are this blocks?!)

In Bitminter login it is showing up that my total earnings are like this:

Quote

Personal Assets    Balance      Unconfirmed    Future      Expected per block
Bitcoins      0.00227229    -      0.00227229    0.00003750
Namecoins      0.00717448    -      0.00717448    0.00007501

I feel like there's some difference between my client earnings and those showing up here? Or is it because I missunderstand something between the two statistical numbers in client and my bitminter login?

I also would be glad to know what exactly the shift feature (https://bitminter.com/shifts) is meaning to me and my earnings. Do I have to share my earnings because I am earning "less" compared to other miners with better hardware?

By side... currently Bitminter is mining BTC and NMC which are both Sha256 based currencies. Wouldn't it make sense to cross-mine other Sha256 currencies as well even if they are not as successful as BTC/NMC yet? As far as I know BTC/NMC Mining works somehow without much more extra calculation efford...

I had a look to this list showing up other SHA256 Crypto-Currencies...
http://en.wikipedia.org/wiki/List_of_cryptocurrencies

figure 00058592 will probably be number of shares accepted since you started client. shares are your own contribution as a proportion of all. client doesn't show btc earnings.

merged mining with namecoin indeed takes no or v little more effort. not all sha256 coins can be merge mined with btc. the ones that can are useless/scams/painintheasss

d-angel2001

newbie

Activity: 137

Merit: 0

I have a question regarding Bitminter Client. I am currently mining with 2 Block Erupters having a total of about 660 MH/s. My Client has been running for 5 days now shoing up I've earned 00058592 BTC Coins (or are this blocks?!)

In Bitminter login it is showing up that my total earnings are like this:

Quote

Personal Assets    Balance      Unconfirmed    Future      Expected per block
Bitcoins      0.00227229    -      0.00227229    0.00003750
Namecoins      0.00717448    -      0.00717448    0.00007501

I feel like there's some difference between my client earnings and those showing up here? Or is it because I missunderstand something between the two statistical numbers in client and my bitminter login?

I also would be glad to know what exactly the shift feature (https://bitminter.com/shifts) is meaning to me and my earnings. Do I have to share my earnings because I am earning "less" compared to other miners with better hardware?

By side... currently Bitminter is mining BTC and NMC which are both Sha256 based currencies. Wouldn't it make sense to cross-mine other Sha256 currencies as well even if they are not as successful as BTC/NMC yet? As far as I know BTC/NMC Mining works somehow without much more extra calculation efford...

I had a look to this list showing up other SHA256 Crypto-Currencies...
http://en.wikipedia.org/wiki/List_of_cryptocurrencies

railzand

sr. member

Activity: 462

Merit: 250

Lux e tenebris

Quote from: bittermuch on December 06, 2013, 03:49:04 PM

I am running three workers as follows on BitMinter Client v1.4.3

Mac OSX Snow Leopard w/3 ASIC Block Erupter USB Miners
Windows 7 Enterprise -32 bit w/2 ASIC Block Erupter USB Miners on an HP Z200 Workstation
Windows 7 Professional -64 bit w/7 ASIC Block Erupter USB Miners and 2 x GeForce 9800GT graphics cards on GeForce R331.93 on an AlienWare Area 51 mini tower

While there do not appear to be any configurable items on the Mac, the GeForce 9800GT will allow me to modify these entries:

Work group size
Work intervals

and enable/disable Manual vectors

The information icon gives minimal descriptions and I'm wondering if others have tweaked these settings for a performance gain. I just increased the Work group size of each GeForce to 256 and am watching its performance.

Regarding my Windows 7 boxes, I'm wondering if anyone has had success playing around with the comm port settings by increasing from the default speed of 9600. My hash rates seem to be fairly consistent, but if possible, I wish to reduce the Proofs of work rejected by the server. Or is that totally beyond my control?

All feedback is welcomed!

I reckon you'd be better off financially using your gpus to mine scrypt coins and convert to btc at hashco.ws see my sig. look at https://litecointalk.org/index.php/topic,7722.0.html, but set them up for hascows. now i think about it you'll need to run cudaminer for your nvidia cards. research round that litecoin setup would show you some ideas for intervals and vectors if you want to stay loyal to DrH.
with your asics, there are threads on here somewhere about overclocking and com settings. you might need a fan

Billsonl

member

Activity: 82

Merit: 10

Hi Dr. I am having difficulties connecting my 2 KnC miners to your pool. I am getting the "Connect to CGMiner API failed." It only started yesterday after a reboot. I was mining fine for a month before. What is going on? Thanks for your help. I have been using the same setting and it worked before. they are as follows

mint.bitminter.com:3333
MyUserId.workerName

NVM, solved the problem.

FriedIV

newbie

Activity: 23

Merit: 0

Quote from: DrHaribo on December 09, 2013, 01:23:51 PM

Quote from: FriedIV on December 09, 2013, 10:52:17 AM

It is the jalepeno that is connected to USB (COM16). Changing the USB plugin that the jalepeno is plugged into causes the new COM port to be in use as well and Bitminter is unable to detect the device there either. Yet under my Devices and Printers Windows page the jalepeno shows up as BitFORCE SHA256 SC.

I also posted this:

I flashed on of my jalepeno's this morning with BitForce_SC-1.2.5. Everything seemed to go fine. However now Bitminter cannot connect to it. Under Control Panel>Hardware and Sound>Devices and Printers BitFORCE SHA256 SC shows up. And it is on USB Serial Post(COM16). Bitminter says it cannot probe COM16: port in use. Can anyone give an idea of what I can do to fix this? Or did I break it?

The COM port is always in use? Did you try a reboot?

Since I flashed the jalepeno, yes. The jale is plugged in and windows sees it as a miner but now the bitminter program does not see it and says that it "cannot probe COM16: port in use" . The port is in use because the jale is plugged into it. Checking device properties the jale shows up on the com port that bitminter says it cannot scan or something. I have rebooted several times. I also tried plugging the jale into another usb plug. The com port changed and the same message was given by Bitminter, "cannot probe COMxx: port in use".

DrHaribo

legendary

Activity: 2730

Merit: 1034

Needs more jiggawatts

Quote from: uberdag on December 09, 2013, 10:42:07 PM

Any work planned work on hex16's specifically hex16b's

Any documentation for those?

Topic: Bitminter client (Windows/Linux/Mac) - page 18. (Read 654946 times)