Yep. Antminer U1 support coming in next version. I hope to have a beta ready soon. 
OK, thanks when available i will test it
regards
Topic: Bitminter client (Windows/Linux/Mac) - page 16. (Read 655007 times)
OK, thanks when available i will test it
regards
can someone please help?
It's looking for ASIC-based mining hardware: https://en.bitcoin.it/wiki/Mining_hardware_comparison#ASIC
2014.01.28 [00:55] Probe failed: No serial ports found
2014.01.28 [00:55] No external devices detected.
2014.01.28 [00:55] BFL and Icarus drivers: http://www.ftdichip.com/Drivers/VCP.htm ASICMiner drivers: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx On Linux load FTDI driver: "sudo modprobe ftdi_sio vendor=0x0403 product=0x6014". You may lack access to serial ports (Ubuntu: "sudo usermod -a -G dialout USERNAME" then log out and back in).
can someone please help?
2014.01.28 [00:55] No external devices detected.
2014.01.28 [00:55] BFL and Icarus drivers: http://www.ftdichip.com/Drivers/VCP.htm ASICMiner drivers: http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx On Linux load FTDI driver: "sudo modprobe ftdi_sio vendor=0x0403 product=0x6014". You may lack access to serial ports (Ubuntu: "sudo usermod -a -G dialout USERNAME" then log out and back in).
can someone please help?
Yep. Antminer U1 support coming in next version. I hope to have a beta ready soon.
@DrHaribo
Is a support for the Antminers U1 planned in the Bitminter Client?
Thanks for the answer.
Is a support for the Antminers U1 planned in the Bitminter Client?
Thanks for the answer.
I have sent DrHaribo a U1 to work with. Hopefully he can incorporate support soon.
@DrHaribo
Is a support for the Antminers U1 planned in the Bitminter Client?
Thanks for the answer.
Is a support for the Antminers U1 planned in the Bitminter Client?
Thanks for the answer.
That's port 3333.
stratum+tcp://mint.bitminter.com:3333
stratum+tcp://mint.bitminter.com:3333
Thank you for the advice, but I am using port 3333 along with stratum+tcp://mint.bitminter.com. The username and worker details appear to be correct as well. All other pools work fine (BTC Guild, Slush's Pool, etc.), but for some reason I can't connect to Bitminter. All the noncerate does is continually flash 0GH/s.
Anyone have a suggestion?
EDIT: I was typing in 'stratum+tcp://mint.bitminter.com' instead of just 'mint.bitminter.com' on the admin page. Thanks for the help.
That's port 3333.
stratum+tcp://mint.bitminter.com:3333
stratum+tcp://mint.bitminter.com:3333
I'm trying to connect using stratum+tcp://mint.bitminter.com (on the admin page), and the noncerate is just flashing 0GH/s. I can't figure it out and it's very frustrating.
I don't have a rig like that but maybe include the port?
Code:
mint.bitminter.com:3333
Edit: fixed port!
Does anyone have advice on connecting to Bitminter via stratum proxy with a Bitfury rig?
I'm trying to connect using stratum+tcp://mint.bitminter.com (on the admin page), and the noncerate is just flashing 0GH/s. I can't figure it out and it's very frustrating.
I'm trying to connect using stratum+tcp://mint.bitminter.com (on the admin page), and the noncerate is just flashing 0GH/s. I can't figure it out and it's very frustrating.
Yeah did that 10 times already, uninstalled driver then reinstall again. only recognizes COM15.
Sometimes bfgminer picks up more of them than Bitminter client does. Worth a shot.
I'd try the blue/red fury support thread about the rest, especially the devices that don't even show as COM ports.
OMG I GOT THEM ALL TO WORK. I just kept pressing the little buttons on the red fury and Bitminter was able to detect it. Thanks a bunch.
Yeah did that 10 times already, uninstalled driver then reinstall again. only recognizes COM15.
Sometimes bfgminer picks up more of them than Bitminter client does. Worth a shot.
I'd try the blue/red fury support thread about the rest, especially the devices that don't even show as COM ports.
Yes COM13, COM15, COM16. and only BitMinter recognize the one at COM15, the other 2 said timeout 
Did you try unplugging and plugging them back in, then scan all ports?
Yeah did that 10 times already, uninstalled driver then reinstall again. only recognizes COM15.
Yes COM13, COM15, COM16. and only BitMinter recognize the one at COM15, the other 2 said timeout
Did you try unplugging and plugging them back in, then scan all ports?
Finally got one out of my three bitfury worked with BitMinter, still have 2 I just don't understand why they don't work
Do all 5 show up as COM ports in Windows?
Sorry I meant I only have 3 total.
Yes COM13, COM15, COM16. and only BitMinter recognize the one at COM15, the other 2 said timeout
Finally got one out of my three bitfury worked with BitMinter, still have 2 I just don't understand why they don't work
Do all 5 show up as COM ports in Windows?
Finally got one out of my three bitfury worked with BitMinter, still have 2 I just don't understand why they don't work
OK, thanks. I'll go ask in the BFGminer thread.
hmm I tried that but its not detecting my red fury either. it's showing 8.86 mh/s.
I have 3 ASICMiner Block Erupter and I don't have any issue with them.
I have 3 ASICMiner Block Erupter and I don't have any issue with them.
I tried using BFGminer but it's very confusing, any plan on getting bitminter to work with red fury any time soon?
I hope to fix the hashrate issue. But the problem with it not detecting them as easily as bfgminer does, I have no idea what the problem is.
If you know how to use the command line, a simple way to run bfgminer:
Code:
bfgminer -o stratum+tcp://mint.bitminter.com:3333 -u user_worker -p X
Jump to: