Pages:
Author

Topic: BitMinter.com * Optional Custom Miner, PPLNS, Merged mining, Newbie-Friendly! * - page 18. (Read 220699 times)

newbie
Activity: 42
Merit: 0
Alright, maybe someone here can help me.  Trying to get my new blades up and running to the bitminter pool.  Blade Config is as follows:

IP -   192.168.1.81
Mask   - 255.255.255.0
Gateway -   192.168.1.254
WEB Port -   8000
Primary DNS - 8.8.8.8   
Secondary DNS -   4.4.4.4
Ports -   8332,8332
Server addresses -   192.168.1.66,192.168.1.66 (I know this is right)
user:pass - (my user name)_(my worker name):xx,(my user name)_(my worker name):xx


And the mining_proxy.exe - Shortcut has the following in the Target field:

C:\Users\xxxx\Downloads\mining_proxy.exe -o mint.bitminter.com -p 3333


It seems to connect but I just receive the following:

2013-12-04 22:02:14,421 INFO proxy client_service.handle_event # Setting new difficulty: 4
2013-12-04 22:02:14,421 INFO proxy client_service.handle_event # New job 54d9-d4 for prevhash c3b79eab, clean_jobs=True
2013-12-04 22:02:30,680 INFO proxy client_service.handle_event # New job 54da-25 for prevhash c3b79eab, clean_jobs=False


and the False's just keep coming.  Any help is much appreciated.

If you are still getting problems, just point your blades to bitminter's getwork port. Just change your server address to mint.bitminter.com and check your worker page and see if it is working.
legendary
Activity: 2730
Merit: 1034
Needs more jiggawatts
user:pass - (my user name)_(my worker name),(my user name)_(my worker name)

You forgot the password bit. Put any password at all, anything would be accepted.

user:pass - (my user name)_(my worker name):x,(my user name)_(my worker name):x

For instance put x as password like I did above.

On both graphs it shows my Hashrate Mhps at 0.0.

This is a bug I am trying to track down. The hashrate shows zero, but you can see you are mining because you are getting accepted proofs of work (yellow boxes). So the mining is working, but the hashrate gauges are not working.

I'm getting this error:
2013.12.04 [11:25]  Connection failed: mint.bitminter.com

I am behind a firewall (out of my control), so I chose the port 80 option in the settings.

Sounds like the firewall is being difficult. Can you connect through a proxy? Bitminter client doesn't support proxies though, so you'd have to either use one of those programs that can force a program to go through a proxy, or you could try bfgminer which has proxy support.
newbie
Activity: 8
Merit: 0
Alright, maybe someone here can help me.  Trying to get my new blades up and running to the bitminter pool.  Blade Config is as follows:

IP -   192.168.1.81
Mask   - 255.255.255.0
Gateway -   192.168.1.254
WEB Port -   8000
Primary DNS - 8.8.8.8   
Secondary DNS -   4.4.4.4
Ports -   8332,8332
Server addresses -   192.168.1.66,192.168.1.66 (I know this is right)
user:pass - (my user name)_(my worker name):xx,(my user name)_(my worker name):xx


And the mining_proxy.exe - Shortcut has the following in the Target field:

C:\Users\xxxx\Downloads\mining_proxy.exe -o mint.bitminter.com -p 3333


It seems to connect but I just receive the following:

2013-12-04 22:02:14,421 INFO proxy client_service.handle_event # Setting new difficulty: 4
2013-12-04 22:02:14,421 INFO proxy client_service.handle_event # New job 54d9-d4 for prevhash c3b79eab, clean_jobs=True
2013-12-04 22:02:30,680 INFO proxy client_service.handle_event # New job 54da-25 for prevhash c3b79eab, clean_jobs=False


and the False's just keep coming.  Any help is much appreciated.
newbie
Activity: 1
Merit: 0
Hey Guys,

I'm a new miner & have 2 x AMD Raedon HD 5800 (2GB) cards.

I have setup BitMinter 1.4.3

Work Group Size: 512.

On both graphs it shows my Hashrate Mhps at 0.0.

What am I doing wrong?

See image below:
http://s9.postimg.org/6p16ggpmn/bitminerconfig.png
newbie
Activity: 31
Merit: 0
I am going to try this as soon as my ASIC miner arrive at my house! Thanks!
newbie
Activity: 1
Merit: 0
I'm using the BitMinter tool and need some troubleshooting support.

I'm getting this error:
2013.12.04 [11:25]  Connection failed: mint.bitminter.com

I am behind a firewall (out of my control), so I chose the port 80 option in the settings.

Any suggestions on how to troubleshoot this?
member
Activity: 70
Merit: 10
To put that in perspective a modern CPU with mutli cores costing a few hundred dollars was doing a couple of Mega hashes... maybe 4 or 5 max.  An ASIC costing $1-2K can already do 30, 50, 60 GIGAHASHES. 

That's 4 vs. 60,000 for the math challenged. 
legendary
Activity: 2730
Merit: 1034
Needs more jiggawatts
You will likely make less than one penny per day - don't waste your time or the electricity.

Yeah, seriously, take that advice. CPU mining hasn't made sense since 2011.
member
Activity: 70
Merit: 10
I have a LOT of boxes that sit idle 80% of the time but have very low end vids, and power is included in my hosting......Can you recommend a good cpu miner?

You will likely make less than one penny per day - don't waste your time or the electricity.
legendary
Activity: 2730
Merit: 1034
Needs more jiggawatts
I have a LOT of boxes that sit idle 80% of the time but have very low end vids, and power is included in my hosting......Can you recommend a good cpu miner?

I think it's possible to CPU mine with bfgminer. Not sure if you need to compile your own or just use a command line switch..?
newbie
Activity: 7
Merit: 0
I have a LOT of boxes that sit idle 80% of the time but have very low end vids, and power is included in my hosting......Can you recommend a good cpu miner?
legendary
Activity: 2730
Merit: 1034
Needs more jiggawatts
HI!  Any thoughts on why CPU mining quit working today?  I have tried to re-start on 2 of my machines and neither shows CPU as available...

CPU mining was removed (finally!) in the latest version of Bitminter client.

CPU mining has not been profitable since 2011. And other CPU miners are 10x faster than Bitminter client, which was never optimized for CPU mining. It was time to end the insanity and get rid of that.

If you insist on CPU mining you can try to find a good CPU miner. But be aware that it's not going to be profitable, it will mostly just burn electricity.
newbie
Activity: 7
Merit: 0
HI!  Any thoughts on why CPU mining quit working today?  I have tried to re-start on 2 of my machines and neither shows CPU as available...
newbie
Activity: 23
Merit: 0
Thanks! Its great that you're so responsive.
sr. member
Activity: 462
Merit: 250
Lux e tenebris
I dont know...I've been trying to figure out how to use this?

Dude I think you need to read up a bit: https://bitcointalksearch.org/topic/m.208935
legendary
Activity: 2730
Merit: 1034
Needs more jiggawatts
I've been using bitminter for a few weeks with a couple of block eruptors and a blue fury.  I've noticed my client shows a hash rate around 2.8 to 2.9 ghs while in the pool stats page it shows I'm hashing at 2.1 ghs.  Why the difference in hash rate? 

This appears to be a bug. I'm looking into it.

I dont know...I've been trying to figure out how to use this?

If you have a computer with an AMD graphics card, you could try on that. But it's only useful for learning how mining works. A normal computer will lose you money due to electricity costs. You need ASIC hardware to make a profit. It's way faster and more efficient.
newbie
Activity: 3
Merit: 0
I dont know...I've been trying to figure out how to use this?
sr. member
Activity: 462
Merit: 250
Lux e tenebris
I'm having problems either understanding how to do this, or something. I just downloaded bitminter client, and it keeps saying:

probe failed: no serial ports found.
no external devices detected.


Does anyone know what to do, or what I am missing?

What mining hardware are you trying to connect?
newbie
Activity: 3
Merit: 0
I'm having problems either understanding how to do this, or something. I just downloaded bitminter client, and it keeps saying:

probe failed: no serial ports found.
no external devices detected.


Does anyone know what to do, or what I am missing?
newbie
Activity: 23
Merit: 0
I've been using bitminter for a few weeks with a couple of block eruptors and a blue fury.  I've noticed my client shows a hash rate around 2.8 to 2.9 ghs while in the pool stats page it shows I'm hashing at 2.1 ghs.  Why the difference in hash rate? 

The blue fury also shows a ton of miscalculations.  Is that related? I'm not sure if it's a hardware problem or a reporting issue.
Pages:
Jump to: