Trying this now.
My WAN ip address is : 192.168.1**
and my LAN ip address is: 192.168.0.**
What about all the mask and gateway settings on the blade?
Topic: Block Erupter Blade - Bitcoin for help! - page 2. (Read 1547 times)
ok
find out what ip your network uses it should be either 192.168.2.1 or 192.168.1.1 or 192.168.0.1
then connect to your blade and set the ip address to what ever your network setting is but change the last digits to a diffrent number like 192.168.2.12
now restart the blade and connect it directly to you network.
now connect you pc back to the network and type in the ip you gave to the blade
after that the rest of the setting should be pretty simple
find out what ip your network uses it should be either 192.168.2.1 or 192.168.1.1 or 192.168.0.1
then connect to your blade and set the ip address to what ever your network setting is but change the last digits to a diffrent number like 192.168.2.12
now restart the blade and connect it directly to you network.
now connect you pc back to the network and type in the ip you gave to the blade
after that the rest of the setting should be pretty simple
What is the subnet of your LAN? 192.168.1.xxx?
Tried all that..still can't get it to work. I really think it has something to my IP4 configurations. I have to play around with them so much and it's hit or miss (just to get into the config screen).
https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369
contains everything you need for setting and everthing scroll 3/4 the way down the page
contains everything you need for setting and everthing scroll 3/4 the way down the page
Hi,
Ok I came here because after 2 days I can't my block erupter blade to work. I can connect to my blade only if I connect my ethernet cable direct AND fiddlings with my IP4 configs.
Will give bitcoin to anyone who can get me this blade working through the phone or chat. Thanks!
Ok I came here because after 2 days I can't my block erupter blade to work. I can connect to my blade only if I connect my ethernet cable direct AND fiddlings with my IP4 configs.
Will give bitcoin to anyone who can get me this blade working through the phone or chat. Thanks!
Jump to: