Topic: Blockchain.info - Bitcoin Block explorer & Currency Statistics - page 113. (Read 482537 times)
August 01, 2012, 01:45:21 PM
Problems with the Android app. Tried to send roughly half of an addresses balance, but was told after I scanned my paper wallet that I had insufficient funds. Tried to send a quarter of the total instead and it worked fine. Tried to send another transaction the same size, and again, insufficient funds. I had to break that transaction again into two pieces. At the end I was able to send the amount I wanted, but it took multiple transactions, and the app seemed to have problems reading how much my address had.
Here's how i do it:
1. change status of address to Archive (folder icon)
2. go to Archive tab
3. click checkbox where it says "Bitcoin Address" (on the left side)
4. select archived address that you would like to delete
5. Click sweep / delete button
1. change status of address to Archive (folder icon)
2. go to Archive tab
3. click checkbox where it says "Bitcoin Address" (on the left side)
4. select archived address that you would like to delete
5. Click sweep / delete button
Thanks for that. Archiving alone is actually good enough, but I hadnt found that. For anyone else looking; you have to click "receive money".
Here's how i do it:
1. change status of address to Archive (folder icon)
2. go to Archive tab
3. click checkbox where it says "Bitcoin Address" (on the left side)
4. select archived address that you would like to delete
5. Click sweep / delete button
1. change status of address to Archive (folder icon)
2. go to Archive tab
3. click checkbox where it says "Bitcoin Address" (on the left side)
4. select archived address that you would like to delete
5. Click sweep / delete button
Question about "watch addresses"
I added an address to my blockchain.info wallet to watch only. This seemed like a very useful feature, but now I am unable to see my actual wallet balance (without the watch address for which I have not provided the keys), nor do I see a way to remove this watch address.
Please help?
You are right... the delete option is gone..... piuk? I added an address to my blockchain.info wallet to watch only. This seemed like a very useful feature, but now I am unable to see my actual wallet balance (without the watch address for which I have not provided the keys), nor do I see a way to remove this watch address.
Please help?
Question about "watch addresses"
I added an address to my blockchain.info wallet to watch only. This seemed like a very useful feature, but now I am unable to see my actual wallet balance (without the watch address for which I have not provided the keys), nor do I see a way to remove this watch address.
Please help?
I added an address to my blockchain.info wallet to watch only. This seemed like a very useful feature, but now I am unable to see my actual wallet balance (without the watch address for which I have not provided the keys), nor do I see a way to remove this watch address.
Please help?
Bug report: Importing a paper wallet address (printed from bitaddress.org) with the built-in QR code reader doesn't work. Screenshot: http://imgur.com/h5Vo3
The private key shown in the error message is correct, so the Flash QR decoder seems to work.
I copy/pasted the private key from another QR decoder and it imported without problems.
Browser: Chrome on Windows XP.
The private key shown in the error message is correct, so the Flash QR decoder seems to work.
I copy/pasted the private key from another QR decoder and it imported without problems.
Browser: Chrome on Windows XP.
The pool 50BTC.com still does not appear on this page http://blockchain.info/pools
The list of addresses that can be used by us:
176.9.130.31
176.9.130.32
176.9.130.35
176.9.130.36
176.9.135.190
176.9.91.111
176.9.91.124
176.9.91.123
176.9.56.118
The list of addresses that can be used by us:
176.9.130.31
176.9.130.32
176.9.130.35
176.9.130.36
176.9.135.190
176.9.91.111
176.9.91.124
176.9.91.123
176.9.56.118
It is possible to list existing mywallet addresses/labels with the current mywallet blockchain.info api.
http://blockchain.info/mywallet_api
It seems the only way to manage labels/address is locally with a database and calling them from the local database to get balance or make payments.
Thanks.
http://blockchain.info/mywallet_api
It seems the only way to manage labels/address is locally with a database and calling them from the local database to get balance or make payments.
Thanks.
Did you give them a list of your IPs?
Yes, we did. We sent private message with IP list to piuk 2 weeks ago.Yes, 176.9.135.190 it is in list of our ip addresses
See, https://blockchain.info/block-height/191015 for eg. how blockchain is seeing 50btc blocks.
Did you give them a list of your IPs?
Yes, we did. We sent private message with IP list to piuk 2 weeks ago.Yes, 176.9.135.190 it is in list of our ip addresses
Hi,
We've checked http://blockchain.info/pools again and still couldn't find 50BTC.com on diagramm.
It seems very strange, cause we have more than 1,1 Th/S. An we've found lot of blocks.
It is some special attitude to us?)))
Could we somehow handle it?
Did you give them a list of your IPs? Because if they show up in the list of unknown IPs under the pool graph then that means they haven't linked the IPs to your pool yet.We've checked http://blockchain.info/pools again and still couldn't find 50BTC.com on diagramm.
It seems very strange, cause we have more than 1,1 Th/S. An we've found lot of blocks.
It is some special attitude to us?)))
Could we somehow handle it?
I did a quick look. Maybe you are 176.9.135.190? That seems near your 50btc.com @ 176.9.130.31 or pool.50btc.com @ 176.9.130.35. I'm answering because I happen to mine at 50btc.
You could look up your last block on blockchain.info and see what it says for "Relayed by" IP.
I see 5.9.24.81 for your 3 most recent blocks which means you'd be the #1 unknown IP with 11 blocks not being tagged as 50btc.com
Hi,
We've checked http://blockchain.info/pools again and still couldn't find 50BTC.com on diagramm.
It seems very strange, cause we have more than 1,1 Th/S. An we've found lot of blocks.
It is some special attitude to us?)))
Could we somehow handle it?
We've checked http://blockchain.info/pools again and still couldn't find 50BTC.com on diagramm.
It seems very strange, cause we have more than 1,1 Th/S. An we've found lot of blocks.
It is some special attitude to us?)))
Could we somehow handle it?
Could you please add importing arbitrary passphrase as a key (see http://bitaddress.org for example).
I.e. if private key format is not recognized, suggest using sha256 of the passphrase.
I.e. if private key format is not recognized, suggest using sha256 of the passphrase.
So to start I have...
Label 0 5 btc
Label 1 1 btc
Label 2 0 btc
After transaction
Label 0 4.995 btc
Label 1 0 btc
Label 2 1 btc
Label 0 5 btc
Label 1 1 btc
Label 2 0 btc
After transaction
Label 0 4.995 btc
Label 1 0 btc
Label 2 1 btc
Do a 'custom' send, specify both label 0 and 1 as the addresses to send from, and set 2 outputs: 4.995 to label 0 and 1 to label 2.
Say I want to transfer funds from one address to another address in the same wallet.
2 questions
1. Do the miner/blockchain.info fee still apply?
2. If (1) is true then is there a way to specify which address to take the fee out of?
Example.
Label 1 has 1 BTC
Label 2 has 0 BTC
I want to take 1 BTC and send it from Label 1 to Label 2. Now apparently if question 1 is in effect this is not going to happen.
2 questions
1. Do the miner/blockchain.info fee still apply?
2. If (1) is true then is there a way to specify which address to take the fee out of?
Example.
Label 1 has 1 BTC
Label 2 has 0 BTC
I want to take 1 BTC and send it from Label 1 to Label 2. Now apparently if question 1 is in effect this is not going to happen.
Yes miners fee will apply because you have to push the TX to the blockchain.
If you do an advanced send then you can specify which address will be the 'sending' address (and therefor where the fee will be taken from).
Say I want to transfer funds from one address to another address in the same wallet.
2 questions
1. Do the miner/blockchain.info fee still apply?
2. If (1) is true then is there a way to specify which address to take the fee out of?
Example.
Label 1 has 1 BTC
Label 2 has 0 BTC
I want to take 1 BTC and send it from Label 1 to Label 2. Now apparently if question 1 is in effect this is not going to happen.
Can I have say, a label0 that contains say 5 btc and have blockchain.info take the fee out of that?
So to start I have...
Label 0 5 btc
Label 1 1 btc
Label 2 0 btc
After transaction
Label 0 4.995 btc
Label 1 0 btc
Label 2 1 btc
?
2 questions
1. Do the miner/blockchain.info fee still apply?
2. If (1) is true then is there a way to specify which address to take the fee out of?
Example.
Label 1 has 1 BTC
Label 2 has 0 BTC
I want to take 1 BTC and send it from Label 1 to Label 2. Now apparently if question 1 is in effect this is not going to happen.
Can I have say, a label0 that contains say 5 btc and have blockchain.info take the fee out of that?
So to start I have...
Label 0 5 btc
Label 1 1 btc
Label 2 0 btc
After transaction
Label 0 4.995 btc
Label 1 0 btc
Label 2 1 btc
? Isn't there a chrome extension that will talk to bitcoind and do essentially that?
I developed a chrome extension that talked to bitcoind. Is that mine?
Isn't there a chrome extension that will talk to bitcoind and do essentially that?
I couldn't get the chrome extension to work w/ Ubuntu 32bit. On minor bug related note:
MyWallet calculated the amount of BTC required to send an anonymous transaction as far above the required amount. I believe this picture describes it well: http://imgur.com/6AUYq
I had 18.7 BTC in my wallet
I wanted to send an anonymous transaction for 17BTC
There was a red warning which appeared "Insufficient funds. Value Needed 33.33206274 BTC. Available amount 18.74375052.
OS: Ubuntu 12.04 32bit
Browser: Chromium 18.0.1025.168
And finally a feature request
Send and receive anonymous coins at the same time, that is to say a "mix and foward" service. Right now when I want to anonymously move coins from service A to service B, I have to move the coins through my wallet as follows: anonymously receive coins into My Wallet from service A and then anonymously send coins to service B from My Wallet. I would greatly appreciate if a feature were added to the mixing service whereby I could put in an address, Address1, and it would create a second address, Address 2. Now I log into service A, send some coins to Address2, the coins are mixed and a fee is deducted, and then coins are then sent to Address1. Hell, you wouldn't even need to log in! Also, bonuses, if given, should be forwarded along to Address1.
wouldnt it be awesome to just import a wallet.dat?
no, seriously. would that work?
Isn't there a chrome extension that will talk to bitcoind and do essentially that?no, seriously. would that work?
I dunno.
I'm a fuckin noob and I just want to click "upload" -> "wallet.dat" -> "import" .... [done]
supporting encrypted wallets, as well.
This great site should be translated at least in French and Spanish to reach a wider range of people.
+1 I'm even willing to help translate it to Russian
Jump to: