Sorry I wasn't clear: how do I identify which ports are Block Erupters, and which ports are Blue Fury ASICs? Currently with just the Blue Fury units there are no ttyUSB devices on my MinePeon:
I'll make a post here for others (since we were chatting on MinePeon forums).
The only way I could get both Erupters and BlueFuries to work together was by defining both the BlueFury and Erupters explicitly, for example my test configuration was 1x BlueFury, 2x Erupters:
#!/bin/bash
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer -S bitfury:/dev/ttyACM0 -S ICA:/dev/ttyUSB0 -S ICA:/dev/ttyUSB1 -c /opt/minepeon/etc/miner.conf
However, this really doesn't do much good, as upon boot up, while it will detect the BlueFury, it instantly goes into a panic with tons Hardware Errors. Just running the BlueFury by itself on MinePeon with BFGMiner 3.4.0 it does the same thing, I know I created a build of BFGMiner 3.2.0 on MinePeon last night, however I can't remember which box it's on at the moment (lol).
EDIT:
Found my build of BFGMiner 3.2.0 that I made last night for MinePeon, just tried it out, getting ZERO hardware errors, so if you are running MinePeon and getting a ton of hardware errors, here's a fix:
wget http://256mining.com/downloads/minepeon_bfgminer-fury.tgz
tar -xvf minepeon_bfgminer-fury.tgz
cp bfgminer-fury /opt/minepeon/bin/bfgminer-fury
Then change your miner-start.sh script like so:
#!/bin/bash
sleep 10
/usr/bin/screen -dmS miner /opt/minepeon/bin/bfgminer-fury -S bitfury:/dev/ttyACM0 -S ICA:/dev/ttyUSB0 -S ICA:/dev/ttyUSB1 -c /opt/minepeon/etc/miner.conf
(Yes you still have to specify each device...)
I'm glad that it worked for you! your tip is appreciated
