Topic: BM1384 Pod Miner plus trade-in/recycling - an interest and feasibility poll - page 2. (Read 27904 times)
March 08, 2016, 04:31:44 PM
Well part of the advantage is I don't have to write a driver for it, which is good since I'm already doing everything else (and probably also code work, since the guy who's supposed to be helping hasn't gotten back to me in 3 weeks) for a couple other projects right now - on top of manufacturing and hosting. If someone wants to port over S5 code to work with a USB/UART controller, this guy would hook right up to it - except you wouldn't have a temp sensor since that ties in through I2C on the 18-pin header. I had a board design about Christmas with all that stuff integrated, and I handed it to Novak for firmware but he never got around to it and then he left for a freakin' sweet rocket scientist job so it's not gonna get done in any time frame where the BM1384 is even really viable as a hobby miner, not when I have A3218 and BitFury projects already underway.
March 08, 2016, 04:11:27 PM
I think he means:
What the advantage of using a S5 controller vs integrating USB (like the compac stick or the U3)
What the advantage of using a S5 controller vs integrating USB (like the compac stick or the U3)
March 08, 2016, 03:55:57 PM
Not sure I understand that question. Please elaborate.
March 08, 2016, 03:52:32 PM
What is the overhead to use a USB controller in the Pod Miner?
March 05, 2016, 05:46:41 PM
I'll take one I have one S5 controller BB no power board laying around will that mater if so i l get one ,
but one POD for me .
ty
but one POD for me .
ty
March 05, 2016, 05:32:14 PM
I probably have enough for sticks. But if you want to trade it for one of the S5-controller-compatible pods that'd be alright because I won't have enough chips for everything.
If you want. I'm from Canada so we'd just need to take the 3x $ shipping cost back and forth in the math. Then i could send you the two boards at some point.
I just thought you were giving up on S5 chips pods? Or are they Bitfury pods?
March 05, 2016, 11:13:07 AM
I probably have enough for sticks. But if you want to trade it for one of the S5-controller-compatible pods that'd be alright because I won't have enough chips for everything.
March 05, 2016, 10:55:00 AM
Depending on how near, look at kilo's "Community miner discussion" thread. That's basically taking over my TypeZero project and the plan is to build a USB-connected board that'll fit on an S1 chassis with BitFury chips.
What should i do with that dead S5 board you sent me? I still have it. Are you still pulling chips for sticks?
March 05, 2016, 09:37:31 AM
Depending on how near, look at kilo's "Community miner discussion" thread. That's basically taking over my TypeZero project and the plan is to build a USB-connected board that'll fit on an S1 chassis with BitFury chips.
March 05, 2016, 02:09:35 AM
Well whatever you decide on i'm interested and looking to purchase a substantial amount of hash power in the near future 
March 05, 2016, 01:39:21 AM
This question has come up repeatedly in the past, but it's been a while so I will go ahead and answer it.
No. In no uncertain terms, no. No gridseed pods, no U3, no R-Box. U3 is perhaps the most likely candidate, as it's probably the least uselessly small and dense. But in general, no.
No. In no uncertain terms, no. No gridseed pods, no U3, no R-Box. U3 is perhaps the most likely candidate, as it's probably the least uselessly small and dense. But in general, no.
March 05, 2016, 01:13:31 AM
what about converting some gridseed orbs? I have about 14 lying around
March 05, 2016, 01:05:58 AM
It's pretty unlikely, honestly, that I'll opt for CPU cooler compatibility. It was pretty difficult to fit 8x BM1384 in a 3cm square, and it would have been impossible to fit more chips than that under any kind of space I would expect every respectable cooler to cover. That, and leaving all the space clear which one would expect a cooler to need for screws and legs and stuff makes the whole board bigger than it needs to be. Had I my choice of heatsinking, I could have made the pod PCB half its size for the same power and hashrate.
March 04, 2016, 07:11:37 PM
Nope. That's way outside the scope of this particular project, and this project is also almost entirely defunct. I will not build a full-scale board compatible with the S5 controller, and I will not build anything new with the BM1384. I'll probably go ahead and put together a dozen or so 8-chip BM1384 pods that work with the S5 controller, because it's cool and I might have chips left over after Compacs are done anyways. But that's it.
Anything new I build going forward will have our own controls set. Anything full-scale will probably be chassis-compatible with S1/3/5, but run on USB. Anything small I build going forward might work with a CPU cooler, or more likely I'll rig up a heatsink/fan combo for it since CPU cooler compatibility is sorely limiting, but they'll also be USB-tied using my own controls set (same as what's mentioned in the Community Miner discussion thread).
CPU Cooler? I'm game Anything new I build going forward will have our own controls set. Anything full-scale will probably be chassis-compatible with S1/3/5, but run on USB. Anything small I build going forward might work with a CPU cooler, or more likely I'll rig up a heatsink/fan combo for it since CPU cooler compatibility is sorely limiting, but they'll also be USB-tied using my own controls set (same as what's mentioned in the Community Miner discussion thread).
I have about 10 oem lga1150 cpu coolers in my closet right now, and if there is going to be a cpu cooler compatible board coming out even in a year, I think i'll keep em in the closet until this board possibly comes ot. Very interesting, and I love to see a good board that can be linked to a rpi on cgminer ( or even just windows pc).GUIs just cannot compare to bare details.
March 04, 2016, 02:36:50 PM
This all sounds very intriguing. I'm interested in buying one as a working art piece at this rate
March 04, 2016, 02:34:25 PM
Nope. That's way outside the scope of this particular project, and this project is also almost entirely defunct. I will not build a full-scale board compatible with the S5 controller, and I will not build anything new with the BM1384. I'll probably go ahead and put together a dozen or so 8-chip BM1384 pods that work with the S5 controller, because it's cool and I might have chips left over after Compacs are done anyways. But that's it.
Anything new I build going forward will have our own controls set. Anything full-scale will probably be chassis-compatible with S1/3/5, but run on USB. Anything small I build going forward might work with a CPU cooler, or more likely I'll rig up a heatsink/fan combo for it since CPU cooler compatibility is sorely limiting, but they'll also be USB-tied using my own controls set (same as what's mentioned in the Community Miner discussion thread).
Anything new I build going forward will have our own controls set. Anything full-scale will probably be chassis-compatible with S1/3/5, but run on USB. Anything small I build going forward might work with a CPU cooler, or more likely I'll rig up a heatsink/fan combo for it since CPU cooler compatibility is sorely limiting, but they'll also be USB-tied using my own controls set (same as what's mentioned in the Community Miner discussion thread).
March 04, 2016, 02:26:19 PM
well, my S5 controller has 4 ports, and they seem to sell controller cables:
My S5 has 4 ports, also, two are being used by the machine and 2 are open. Are the open ones what would control the pod? Would be an interesting pod if it could run alongside an already running S5, like a piggy back system almost. An S5 will run with 4 S5 Hash cards connected, so if the BM1384 Pod existed and if it had the same interface it would probably work.
Rich
Maybe this project could transform into a "beef up your S5" type of project. Like they build a couple "gekko S5 boards" that users could either replace their existing S5 boards with, or if they have the controller with empty spots plug in 2 more boards (add cooling, etc.) and get like a 3TH S5-gekko or something...
March 04, 2016, 12:39:57 PM
I have a new S7 running, next to an old S3, which I bought off eBay to understand mining better. An S5 is coming, again off eBay. I'd love to use the S3 and S5 with upgraded Sidehack boards at some point. Look forward to hearing more. I bought the S5 with this project specifically in mind, so have a couple options for upgraded boards.
March 03, 2016, 04:06:51 PM
well, my S5 controller has 4 ports, and they seem to sell controller cables:
My S5 has 4 ports, also, two are being used by the machine and 2 are open. Are the open ones what would control the pod? Would be an interesting pod if it could run alongside an already running S5, like a piggy back system almost. An S5 will run with 4 S5 Hash cards connected, so if the BM1384 Pod existed and if it had the same interface it would probably work.
Rich
March 03, 2016, 04:03:12 PM
well, my S5 controller has 4 ports, and they seem to sell controller cables:
My S5 has 4 ports, also, two are being used by the machine and 2 are open. Are the open ones what would control the pod? Would be an interesting pod if it could run alongside an already running S5, like a piggy back system almost. Jump to: