Topic: [BTC2] Bitcoin 2, BTC Fork 1:1, PoS 🔥 Anonymous ⚡️Instant TX - page 42. (Read 93110 times)
it's a great job what you're doing here, unfortunately not so happy to see the rate drop, but I think it's stabilizing in time, hard fork.
Will there be a continuation of the bounty?
Not right now, but there will be other marketing and the coinmarketcap listing.
Masternode is running around 1 hour and than just stopped. Every time I have to run it again
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
It means that you didn't set it up correctly yet.
Go to EC2 dashboard. Then click Instances. Then look at your instance's
IPv4 Public IP (externalip=this)
and
Private IPs (bind=this)
in the description.
Those have to be correct in the bitcoin2.conf file. And both the bitcoin2.conf locally and the bitcoin2.conf file at the masternode needs to be as per the guide.
##
This will become easier to setup with managed masternode hosting service after masternodes online listing.
Checked the config file. It is configured as written
Also the masternode needs to run Bitcoin 2 Core and be fully synchronized already.
Masternode is running around 1 hour and than just stopped. Every time I have to run it again
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
It means that you didn't set it up correctly yet.
Go to EC2 dashboard. Then click Instances. Then look at your instance's
IPv4 Public IP (externalip=this)
and
Private IPs (bind=this)
in the description.
Those have to be correct in the bitcoin2.conf file. And both the bitcoin2.conf locally and the bitcoin2.conf file at the masternode needs to be as per the guide.
##
This will become easier to setup with managed masternode hosting service after masternodes online listing.
Checked the config file. It is configured as written
Masternode is running around 1 hour and than just stopped. Every time I have to run it again
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
It means that you didn't set it up correctly yet.
Go to EC2 dashboard. Then click Instances. Then look at your instance's
IPv4 Public IP (externalip=this)
and
Private IPs (bind=this)
in the description.
Those have to be correct in the bitcoin2.conf file. And both the bitcoin2.conf locally and the bitcoin2.conf file at the masternode needs to be as per the guide.
##
This will become easier to setup with managed masternode hosting service after masternodes online listing.
Will there be a continuation of the bounty?
Not right now, but there will be other marketing and the coinmarketcap listing.
Masternode is running around 1 hour and than just stopped. Every time I have to run it again
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
What is this mean status Missing at Masternode table?
Again received two rewards and than apeared status Missing.
My wallet is encrypted and currently unlocked.
you previously planned to exchange in your wallet. Will you implement this idea? I think that exchange is a very necessary feature and will also attract new users.
It is still a part of our plans but we are first focusing on getting more volume and users and getting Bitcoin 2 technically ready for the DEX.
you previously planned to exchange in your wallet. Will you implement this idea? I think that exchange is a very necessary feature and will also attract new users.
It is still a part of our plans but we are first focusing on getting more volume and users and getting Bitcoin 2 technically ready for the DEX.
externalip=your public ip address
bind=your ip address (for Amazon AWS, the private IP. For Google Cloud, the Primary internal IP.)
masternodeaddr=your public ip address:8333 (keep the :8333 as the port number)
masternodeprivkey=Result of Step 1
What addresses should I indicate where it is highlighted in red (where indicate elastic IP from Amazon and where my PC IP address)
bind=your ip address (for Amazon AWS, the private IP. For Google Cloud, the Primary internal IP.)
masternodeaddr=your public ip address:8333 (keep the :8333 as the port number)
masternodeprivkey=Result of Step 1
What addresses should I indicate where it is highlighted in red (where indicate elastic IP from Amazon and where my PC IP address)
externalip=Public IP address of the Amazon AWS. It is best to create an elastic IP in the AWS control panel and associate it with the instance. Then use that elastic IP address here.
bind=The private IP address of the Amazon AWS
masternodeaddr= Same as externalip... except add :8333 to the end.
Don't put your PC's IP address anywhere.
You might find this article helpful if you can't figure out how to find out the IP addresses on Amazon AWS: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-instance-addressing.html
Thank you!
Bitcoin 2, does this mean that you are aiming for becoming just the number 2 or are there higher goals?
The ultimate goal is to become more widely used for day to day transactions than Bitcoin.
For that to happen, Bitcoin 2 would need to become more widely accepted digital money than Bitcoin. Technically it is usable for point of sale transactions at retail merchants etc. already, but adoption needed.
Building that kind of adoption will take time.
Bitcoin 2, does this mean that you are aiming for becoming just the number 2 or are there higher goals?
The ultimate goal is to become more widely used for day to day transactions than Bitcoin.
For that to happen, Bitcoin 2 would need to become more widely accepted digital money than Bitcoin. Technically it is usable for point of sale transactions at retail merchants etc. already, but adoption needed.
Building that kind of adoption will take time.
externalip=your public ip address
bind=your ip address (for Amazon AWS, the private IP. For Google Cloud, the Primary internal IP.)
masternodeaddr=your public ip address:8333 (keep the :8333 as the port number)
masternodeprivkey=Result of Step 1
What addresses should I indicate where it is highlighted in red (where indicate elastic IP from Amazon and where my PC IP address)
bind=your ip address (for Amazon AWS, the private IP. For Google Cloud, the Primary internal IP.)
masternodeaddr=your public ip address:8333 (keep the :8333 as the port number)
masternodeprivkey=Result of Step 1
What addresses should I indicate where it is highlighted in red (where indicate elastic IP from Amazon and where my PC IP address)
externalip=Public IP address of the Amazon AWS. It is best to create an elastic IP in the AWS control panel and associate it with the instance. Then use that elastic IP address here.
bind=The private IP address of the Amazon AWS
masternodeaddr= Same as externalip... except add :8333 to the end.
Don't put your PC's IP address anywhere.
You might find this article helpful if you can't figure out how to find out the IP addresses on Amazon AWS: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/using-instance-addressing.html
Bitcoin 2, does this mean that you are aiming for becoming just the number 2 or are there higher goals?
!
Now compiling the version 2.1.5 for all platforms. Probably releasing it within 24 hours. zBTC2/privacy functionality will be re-enabled within a couple of days after the release of the new version.
This update is mandatory?No, but highly recommended. It has been released now but it is still marked as pre-release until it has been tested more.
Now compiling the version 2.1.5 for all platforms. Probably releasing it within 24 hours. zBTC2/privacy functionality will be re-enabled within a couple of days after the release of the new version.
This update is mandatory?
Now compiling the version 2.1.5 for all platforms. Probably releasing it within 24 hours. zBTC2/privacy functionality will be re-enabled within a couple of days after the release of the new version.
I think that all the time, the volumes will be later when there will be more exchanges, I see the work of the developer, he's a great guy and it inspires me
In case someone notices the temporary privacy functionality maintenance mode on Bitcoin 2 Core, it is because we are working on Bitcoin 2 Core v.2.1.5 that has a related patch.
Jump to: