Its not the total watts for the PSU its how much are you drawing off a single rail. I fried a corsair gold 850 PSU by drawing too much off the pci-e connectors (after checking found it was rated to only 340 watts for the pci-e even though it was an 850 watt psu). Check the specs on your psu, you may need to spread out your power draw, i.e. use one or two connections from the pci-e and connect adapters to use the sata and or 4-pin lines from your psu.
(I am using an EVGA 1300 watt Platinum supply for my AM-V2 even though it is only drawing 634 watts at the wall).
Topic: btcgarden-AM-v1 down to $0.53/GHs. In stock for international selling! - page 10. (Read 162664 times)
August 13, 2014, 10:09:04 PM
August 13, 2014, 08:53:53 PM
can anyone point me towards directions on how to over clock one of these?
also, how much power do other peoples AM-V1 pull? I feel like mine is pulling way to much. 760
also, how much power do other peoples AM-V1 pull? I feel like mine is pulling way to much. 760
What are you using for a power supply?
I was using a corsair 750, which is a lot more powerful then what there web site recommended . That 750 is now dead. so far I am very unhappy with this product (the miner not the power supply). This was my introduction to bitcoin mining, so far not so great.
now I'm using an evga 850. it has only been running for a few hours but it seems to be working.
August 13, 2014, 08:34:48 PM
can anyone point me towards directions on how to over clock one of these?
also, how much power do other peoples AM-V1 pull? I feel like mine is pulling way to much. 760
also, how much power do other peoples AM-V1 pull? I feel like mine is pulling way to much. 760
What are you using for a power supply?
August 13, 2014, 08:16:45 PM
can anyone point me towards directions on how to over clock one of these?
also, how much power do other peoples AM-V1 pull? I feel like mine is pulling way to much. 760
also, how much power do other peoples AM-V1 pull? I feel like mine is pulling way to much. 760
August 13, 2014, 11:29:00 AM
Consider out of that list, only rockminer and btcgarden have stuff that ships next day, not a weeks or months in the future
yes also this. gg btc garden keep going
August 13, 2014, 11:23:30 AM
Well I found it. The BTCGarden AM-V2 should have the pi connected to the BOTTOM connector (the open one on the right). Now hashing away at 596 GHs. Still waiting on poolside stats for reject rates etc.
Is there no temp sensor on the AM-V2 blades?
heh, while I was typing it climbed to 612 Ghs.
Can a miner this quiet really stay cool enough to hash at this rate?
Is there no temp sensor on the AM-V2 blades?
heh, while I was typing it climbed to 612 Ghs.
Can a miner this quiet really stay cool enough to hash at this rate?
Hi it's ok to mine 612 Ghs, I climb frequently to 624/625 no problemo
the pi is always on the right top or botton, the red wires are always ont the right, you were false with your first set up.
I will receive 2 S3 tomorrow
August 13, 2014, 09:45:13 AM
new asicminer special is 8.25T for 10.4BTC plus shipping, with some major DIY assembly needed
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
the asicminer offer could be considered bulk price, not retailed 1,2Th miners, dont you think?
at the right price I would buy 6TH+ of these miners.
Im strongly considering the asicminer tube equipment right now, but the assembly time and lesser-known name are the only issues since I like to resell and antminers are the easiest to liquidate due to being well-known
yea, after considering it, i'd say they're a little bit expensive.. but i guess thats the price of OEMs without their own chip.
and bitmain is out for now. ^^
Consider out of that list, only rockminer and btcgarden have stuff that ships next day, not a weeks or months in the future
August 13, 2014, 07:54:36 AM
new asicminer special is 8.25T for 10.4BTC plus shipping, with some major DIY assembly needed
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
the asicminer offer could be considered bulk price, not retailed 1,2Th miners, dont you think?
at the right price I would buy 6TH+ of these miners.
Im strongly considering the asicminer tube equipment right now, but the assembly time and lesser-known name are the only issues since I like to resell and antminers are the easiest to liquidate due to being well-known
yea, after considering it, i'd say they're a little bit expensive.. but i guess thats the price of OEMs without their own chip.
and bitmain is out for now. ^^
August 13, 2014, 07:00:32 AM
new asicminer special is 8.25T for 10.4BTC plus shipping, with some major DIY assembly needed
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
the asicminer offer could be considered bulk price, not retailed 1,2Th miners, dont you think?
at the right price I would buy 6TH+ of these miners.
Im strongly considering the asicminer tube equipment right now, but the assembly time and lesser-known name are the only issues since I like to resell and antminers are the easiest to liquidate due to being well-known
August 13, 2014, 02:41:24 AM
wow, that was fast.
ordered on friday, just received a call from a DHL agent.
I hope that I will put my hands on my miner tomorrow.
ordered on friday, just received a call from a DHL agent.
I hope that I will put my hands on my miner tomorrow.
August 13, 2014, 12:23:51 AM
Well I found it. The BTCGarden AM-V2 should have the pi connected to the BOTTOM connector (the open one on the right). Now hashing away at 596 GHs. Still waiting on poolside stats for reject rates etc.
Is there no temp sensor on the AM-V2 blades?
heh, while I was typing it climbed to 612 Ghs.
Can a miner this quiet really stay cool enough to hash at this rate?
Is there no temp sensor on the AM-V2 blades?
heh, while I was typing it climbed to 612 Ghs.
Can a miner this quiet really stay cool enough to hash at this rate?
August 12, 2014, 11:54:56 PM
Have my AM-V2 setup but it does nothing. pi is fine, using 7.19 image, power supply is good, fans work fine but get 0 Gh/s no matter what I try.
I have the pi connected to the open port on the top blade (left port since right one connects to next blade down, I know this is opposite of what AM-V1 was but it came wired up that way and the pics from BTCGarden that they posted of machine are also wired right to left starting at top so I assume it is supposed to be that way).
Have tried many pool setups, none show anything. in the CGMiner status tab for the GUI i just get 0 Ghs.
Anyone have any suggestions?
I have the pi connected to the open port on the top blade (left port since right one connects to next blade down, I know this is opposite of what AM-V1 was but it came wired up that way and the pics from BTCGarden that they posted of machine are also wired right to left starting at top so I assume it is supposed to be that way).
Have tried many pool setups, none show anything. in the CGMiner status tab for the GUI i just get 0 Ghs.
Anyone have any suggestions?
August 12, 2014, 10:10:39 PM
Well I just got my BTCGarden AM-V2 today from Minersource. Does anyone know if there is an
updated pi image for the V2 yet? Only one I can find is the version released for the V1 (there is lots of other stuff there but I can't read Chinese)
updated pi image for the V2 yet? Only one I can find is the version released for the V1 (there is lots of other stuff there but I can't read Chinese)
Please download latest one here:
https://www.dropbox.com/s/6q340iadp6b5daa/btcgarden_v0719_192.168.1.123.rar
This doc is about how to do the update
http://www.btcgarden.com/manual/HowToUpdateFirmware.pdf
August 12, 2014, 09:11:25 PM
new asicminer special is 8.25T for 10.4BTC plus shipping, with some major DIY assembly needed
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
the asicminer offer could be considered bulk price, not retailed 1,2Th miners, dont you think?
August 12, 2014, 09:04:21 PM
Well I just got my BTCGarden AM-V2 today from Minersource. Does anyone know if there is an
updated pi image for the V2 yet? Only one I can find is the version released for the V1 (there is lots of other stuff there but I can't read Chinese)
updated pi image for the V2 yet? Only one I can find is the version released for the V1 (there is lots of other stuff there but I can't read Chinese)
August 12, 2014, 08:02:31 AM
new asicminer special is 8.25T for 10.4BTC plus shipping, with some major DIY assembly needed
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
can btcgarden get the 1.2TH units closer to $800 (1.5BTC)?
August 12, 2014, 12:26:27 AM
We've got X2 units in stock @ASICPuppy.net. Shipping from the US.
August 11, 2014, 10:07:04 PM
Appreciate the positive comments. Just cant wait for them to arrive so i can put them besides my other miners and get hashing to get some of that roi back.
Thanks guys
Thanks guys
August 11, 2014, 06:49:38 PM
Agreed... great units. Just wish the pricing would beat out Antminer's since the efficiency is not as hot.
August 11, 2014, 06:44:15 PM
I have one and it is a nice unit.
I like them. Easy to use work as advertised.
There is more room to push them too once they get the firmware tweaked some more.
BTC Garden has been very responsive and when I did have a problem both they and CrazyGuy were very helpful.
http://www.cryptocoinsnews.com/news/review-btcgarden-310-ghs-bitcoin-asic-miner-v1/2014/08/10
I like them. Easy to use work as advertised.
There is more room to push them too once they get the firmware tweaked some more.
BTC Garden has been very responsive and when I did have a problem both they and CrazyGuy were very helpful.
http://www.cryptocoinsnews.com/news/review-btcgarden-310-ghs-bitcoin-asic-miner-v1/2014/08/10
Just ordered my first BTCgarden. Fingers crossed it will all go smoothly. Has anybody ordered one to the UK ? how much was the customs and how long did delivery take.
Also i know btcgarden admin are present here. I hope you deliver a smooth transaction, I will be looking to order 3 more of the same in a few weeks. Maybe the price may go down by then also....Well here's hoping anyway.
Thanks in advance.
Also i know btcgarden admin are present here. I hope you deliver a smooth transaction, I will be looking to order 3 more of the same in a few weeks. Maybe the price may go down by then also....Well here's hoping anyway.
Thanks in advance.
Jump to: