BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 - page 22.

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: Drsmite on February 01, 2012, 07:06:23 PM

I am running the latest stable version pointed at P2Pool. After a few hours of running (I haven't been around when it fails) it throws an invalid length string exception and shuts down. After this happens whenever I try to restart the miner it seems to be ineffective and constantly clocks down without getting a share. I am assuming this is mostly a problem with P2Pool but I was wondering if anyone else has been experiencing this as well. To resolve it I have to kill and restart bitcoind, P2Pool, and BTCMiner.

What is the exact error message? (Maybe it is an invalid json rpc return value.)

If the down-clocking issue disappears after restarting P2PPool it is probably a wrong midstate returned by the pool software (the FPGA uses the midstate value, the verification method of BTCMiner not.)

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: rph on February 02, 2012, 03:44:49 AM

That is not true. -N3 has the same fabric speed as -2 -- check ISE 13.3+ 'speedprint' to confirm.

I verified this. It seems that Xilinx downrated certain (not all) values to SG-2 or something in between SG-2 and SG-3. Originally it was announced with "specifications are identical to the -3 speed grade".

In practice the FPGA boards from the SG-N3 batch are about 5% slower than the ones from SG-3 batch: Using the lastest test release the average speed of the SG-3 FPGA boards is about 215MH/s and the average hash rate of the -N3 FPGA boards is about 205 MH/s.

As written earlier, in practice the speed of SG-N3 should be between SG-2 and SG-3. (Consider that prices for SG-2 and SG-N3 are the same but SG-N3 has no (working) memory controller)

Quote

Xilinx will not guarantee error-free operation of a -3 bitstream in -N3.

They cannot even guarantee this for -3 ...

Since the clock frequency of BTCMiner is variable it runs with every speed grade.

rph

full member

Activity: 176

Merit: 100

Quote from: ztex on January 26, 2012, 04:10:53 AM

newer 1.15x FPGA boards have speed grade -N3 FPGA's. According to the specs this is as fast as speed grade 3.

That is not true. -N3 has the same fabric speed as -2 -- check ISE 13.3+ 'speedprint' to confirm.

Xilinx will not guarantee error-free operation of a -3 bitstream in -N3.

There is a complicated story behind this - my understanding is that -N3 started out at the same
fabric speed as -3, then as they got more yield data, they boosted the -2 to match the original -3,
then boosted -3 even further, without changing -N3, leaving it equal to the current -2.

There's no reason to use -N3 in a miner - you might as well use -2 given it has the same
performance, same price, and is easier to source.

-rph

Drsmite

newbie

Activity: 20

Merit: 0

I am running the latest stable version pointed at P2Pool. After a few hours of running (I haven't been around when it fails) it throws an invalid length string exception and shuts down. After this happens whenever I try to restart the miner it seems to be ineffective and constantly clocks down without getting a share. I am assuming this is mostly a problem with P2Pool but I was wondering if anyone else has been experiencing this as well. To resolve it I have to kill and restart bitcoind, P2Pool, and BTCMiner.

rupy

hero member

Activity: 725

Merit: 503

Yep, mine is running at 216 MHz... It's really cool too... I wonder why? Why does the error rate rise at 220 when the chip doesn't generate any comparable heat to the last firmware at 208?!

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

He he he 1 board runs @ 220 MHz (overlord) Shocked

, 1 @ 216, 3 @ 212 and one at 208 MHz. Works for me. Thank you ztex.

rupy

hero member

Activity: 725

Merit: 503

watching

Inspector 2211

sr. member

Activity: 448

Merit: 250

Quote from: ztex on January 30, 2012, 08:09:43 AM

A testing release of BTCMiner has been published: http://www.ztex.de/btcminer/ZtexBTCMiner-120130.jar .

The bitstream is a bit faster again and should achieve 210 MH/s on average.

The package contains 3 firmwares for LX150 FPGA Boards:

firmware file	frequncy step	note
ztex_ufm1_15d1.ihx	8 Mhz	stable
ztex_ufm1_15d3.ihx	6 Mhz	experimental
ztex_ufm1_15d3a.ihx	4 Mhz	experimental

(In order to avoid conflicts with old bitstreams the new 4/6 MHz firmware has been named ...d3)

I am happy to report that the 15d3a bitstream works for me now. I didn't try the 15d3 bitstream.
The 15d3a starts at 200 MHz, then goes up to 204, then 208, then 212 (error rate > 1%), then back to 208 (error rate < 0.1%), seems to stay at 208 now.

Cool! Thanks!

Note that this is NOT with the Xilence cooler, but with a 12 mm high VGA cooler from China via eBay for $2.79 (including shipping). Yes, it does have a fan.
It gets warmer than the Xilince cooler, but I can still touch it and leave my fingers on it without feeling pain. Like a warm coffee mug.

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

A testing release of BTCMiner has been published: http://www.ztex.de/btcminer/ZtexBTCMiner-120130.jar .

The bitstream is a bit faster again and should achieve 210 MH/s on average.

The package contains 3 firmwares for LX150 FPGA Boards:

firmware file	frequncy step	note
ztex_ufm1_15d1.ihx	8 Mhz	stable
ztex_ufm1_15d3.ihx	6 Mhz	experimental
ztex_ufm1_15d3a.ihx	4 Mhz	experimental

(In order to avoid conflicts with old bitstreams the new 4/6 MHz firmware has been named ...d3)

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

Red n white corner throws the towel ! Cry

Edit: It was a thermal problem ! In an act of frustration, i took some weight from my dumbells and put them ontop of the heatsink. All or nothing ! At 5 Kg it stopped at 168 MHz with 7 Kg it mines at 210 MH/s. Sick shit Grin

Code:

bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 198.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 198.00MHz
New block detected by long polling
New block detected by long polling
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 210.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 210.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 216.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 210.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: f=204.00MHz, errorRate=0.44%, maxErrorRate
=0.47%, hash rate: 203.1MH/s, submitted 12 new nonces, submitted hash rate 15
5.1MH/s
bus-0-0: ztex_ufm1_15d2-0001-02-06: f=210.00MHz, errorRate=0.82%, maxErrorRate
=1.10%, hash rate: 208.3MH/s, submitted 17 new nonces, submitted hash rate 25
0.5MH/s
bus-0-0: poll loop time: 16ms (USB: 1ms network: 15ms) getwork time: 210ms su
bmit time: 213ms
Total hash rate: 411.4 MH/s
Total submitted hash rate: 405.6 MH/s
--------
bus-0-0: ztex_ufm1_15d2-0001-02-05: f=204.00MHz, errorRate=0.09%, maxErrorRate
=0.68%, hash rate: 203.8MH/s, submitted 22 new nonces, submitted hash rate 22
7.7MH/s
bus-0-0: ztex_ufm1_15d2-0001-02-06: f=210.00MHz, errorRate=0.68%, maxErrorRate
=1.24%, hash rate: 208.6MH/s, submitted 17 new nonces, submitted hash rate 24
7.3MH/s
bus-0-0: poll loop time: 16ms (USB: 0ms network: 15ms) getwork time: 204ms su
bmit time: 212ms
Total hash rate: 412.4 MH/s
Total submitted hash rate: 475.0 MH/s
--------
New block detected by long polling

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: Turbor on January 27, 2012, 02:54:19 PM

FPGA damage is the most realistic thing in my eyes. The rest is working. I did not run them without heatsink but sometimes shit happens... who knows. That's life. Another lesson learned. I play around with older miner versions. Perhaps something helps.

Check the things about the power supply as I wrote: Swap the Experimental boards and try out another power supply. Make sure that I send you Experimental Boards 1.3 (If I accidentally delivered a 1.2 board this explains it.)

If you try out older versions you will run into some trouble because old BTCMiner versions does not accept the new Firmware you installed in EEPROM.

Easiest method: Power-on with closed jumper and try it out in single board mode, see http://www.ztex.de/btcminer/

If you want to install old firmware: Power on with closed jumper, remove jumper and install the Firmware using the old BTCMiner version.

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

Quote from: ztex on January 27, 2012, 02:04:35 PM

Quote from: Turbor on January 27, 2012, 01:48:46 PM

I did use the pads first but i ran into the same problems. 1.15d1 won't help. I also think that this i not a thermal problem. I tried it with everything possible. 6 MHz at 100% error rate that's a joke. Even with an improper heatsink the board should do 100 MHz and that heatsink fits perfect, it's flat and down on the chip.

I'm quite sure that I tested you boards with some BTCMiner version. I asked you for the serial number in order to verify that.

There a a few possible reasons:

The FPGA has been damaged by overheating (I warned you that these devices are more diffucult to cool)
Something with the power supply is not correct. Switch the Experimental boards and try out another power supply. Make sure that I send you Experimental Boards 1.3 (1.2 are to weak).
Almost impossible: The bitstream does not work on your FPGA for some reason. This can be excluded by sending me the serial number.

FPGA damage is the most realistic thing in my eyes. The rest is working. I did not run them without heatsink but sometimes shit happens... who knows. That's life. Another lesson learned. I play around with older miner versions. Perhaps something helps.

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: Turbor on January 27, 2012, 01:48:46 PM

I did use the pads first but i ran into the same problems. 1.15d1 won't help. I also think that this i not a thermal problem. I tried it with everything possible. 6 MHz at 100% error rate that's a joke. Even with an improper heatsink the board should do 100 MHz and that heatsink fits perfect, it's flat and down on the chip.

I'm quite sure that I tested you boards with some BTCMiner version. I asked you for the serial number in order to verify that.

There a a few possible reasons:

The FPGA has been damaged by overheating (I warned you that these devices are more diffucult to cool)
Something with the power supply is not correct. Switch the Experimental boards and try out another power supply. Make sure that I send you Experimental Boards 1.3 (1.2 are to weak).
Almost impossible: The bitstream does not work on your FPGA for some reason. This can be excluded by sending me the serial number.

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

Quote from: ztex on January 27, 2012, 12:22:31 PM

Quote from: Turbor on January 27, 2012, 12:00:14 PM

Both heatsink have been mounted with the same glue. One is working at 204 MHz the other has 100% error rate at 6 MHz. I fear that fpga is dead. Must have been a monday chip

Why you did'nt use the adhesive pads delivered with the boards. They have an Aluminum carrier.

Try out the "ztex_ufm1_15d1" firmware of the new release.

I'm sure it is no Monday chip. All FPGA boards are tested and AFAIR the FPGA boards you got have even been tested with the BTCMiner. Give me the last 3 digits of the serial number (you see it if you start the FPGA board in single mode with no firmware in EEPROM or with closed jumper). I will complete the number (as proof that it has been tested) and tell you which BTCMiner ran on this board.

I did use the pads first but i ran into the same problems. 1.15d1 won't help. I also think that this i not a thermal problem. I tried it with everything possible. 6 MHz at 100% error rate that's a joke. Even with an improper heatsink the board should do 100 MHz and that heatsink fits perfect, it's flat and down on the chip.

At least it does something Grin

Code:

ztex_ufm1_15d1-0001-02-06: New device: bitfile=ztex_ufm1_15d1 f_default=192.00
MHz f_max=224.00MHz HpC=1.0H
ztex_ufm1_15d1-0001-02-06: FPGA configuration time: 295 ms
ztex_ufm1_15d1-0001-02-06: Set frequency to 192.00MHz

Disconnect device or press Ctrl-C for exit

ztex_ufm1_15d1-0001-02-06: Using LongPolling URL http://mint.bitminter.com:8332/
lp
New block detected by long polling
ztex_ufm1_15d1-0001-02-06: f=192.00MHz, errorRate=0.00%, hash rate: 192.0MH/s,
  submitted 0 new nonces, submitted hash rate 0.0MH/s
ztex_ufm1_15d1-0001-02-06: f=192.00MHz, errorRate=0.00%, hash rate: 192.0MH/s,
  submitted 1 new nonces, submitted hash rate 143.0MH/s
ztex_ufm1_15d1-0001-02-06: f=192.00MHz, errorRate=0.00%, maxErrorRate=0.00%,
hash rate: 192.0MH/s, submitted 0 new nonces, submitted hash rate 95.4MH/s
ztex_ufm1_15d1-0001-02-06: f=192.00MHz, errorRate=0.00%, maxErrorRate=0.00%,
hash rate: 192.0MH/s, submitted 1 new nonces, submitted hash rate 143.1MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 184.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 192.00MHz
ztex_ufm1_15d1-0001-02-06: f=192.00MHz, errorRate=4.82%, maxErrorRate=4.82%,
hash rate: 182.8MH/s, submitted 1 new nonces, submitted hash rate 171.7MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 184.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 192.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 184.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 192.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 184.00MHz
ztex_ufm1_15d1-0001-02-06: f=184.00MHz, maxErrorRate=4.95%, submitted 0 new no
nces, submitted hash rate 143.1MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 192.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 184.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 184.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: f=176.00MHz, maxErrorRate=3.97%, submitted 0 new no
nces, submitted hash rate 122.6MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 184.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: f=176.00MHz, maxErrorRate=6.90%, submitted 0 new no
nces, submitted hash rate 107.3MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 160.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 176.00MHz
ztex_ufm1_15d1-0001-02-06: f=176.00MHz, maxErrorRate=9.78%, submitted 0 new no
nces, submitted hash rate 95.3MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 160.00MHz
ztex_ufm1_15d1-0001-02-06: f=160.00MHz, maxErrorRate=1.00%, submitted 0 new no
nces, submitted hash rate 81.0MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 160.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 168.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 160.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 152.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 160.00MHz
ztex_ufm1_15d1-0001-02-06: f=160.00MHz, maxErrorRate=5.93%, submitted 0 new no
nces, submitted hash rate 74.0MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 152.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 160.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 152.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 160.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 144.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 152.00MHz
ztex_ufm1_15d1-0001-02-06: f=152.00MHz, maxErrorRate=5.93%, submitted 0 new no
nces, submitted hash rate 68.0MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 144.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 152.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 144.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 152.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 136.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 144.00MHz
ztex_ufm1_15d1-0001-02-06: f=144.00MHz, maxErrorRate=5.93%, submitted 0 new no
nces, submitted hash rate 63.0MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 136.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 144.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 136.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 128.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 136.00MHz
ztex_ufm1_15d1-0001-02-06: f=136.00MHz, maxErrorRate=7.86%, submitted 0 new no
nces, submitted hash rate 58.7MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 128.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 136.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 128.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 120.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 128.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 120.00MHz
ztex_ufm1_15d1-0001-02-06: f=120.00MHz, maxErrorRate=2.00%, submitted 0 new no
nces, submitted hash rate 54.9MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 128.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 120.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 112.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 120.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 112.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 120.00MHz
ztex_ufm1_15d1-0001-02-06: f=120.00MHz, maxErrorRate=9.78%, submitted 0 new no
nces, submitted hash rate 51.6MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 112.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 104.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 112.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 104.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 112.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 104.00MHz
ztex_ufm1_15d1-0001-02-06: f=104.00MHz, maxErrorRate=3.97%, submitted 0 new no
nces, submitted hash rate 48.7MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 96.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 104.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 96.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 88.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 96.00MHz
ztex_ufm1_15d1-0001-02-06: f=96.00MHz, maxErrorRate=9.78%, submitted 0 new non
ces, submitted hash rate 46.1MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 88.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 80.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 72.00MHz
ztex_ufm1_15d1-0001-02-06: f=72.00MHz, maxErrorRate=6.90%, submitted 0 new non
ces, submitted hash rate 43.7MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 64.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 56.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 48.00MHz
ztex_ufm1_15d1-0001-02-06: f=48.00MHz, maxErrorRate=7.86%, submitted 0 new non
ces, submitted hash rate 41.6MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 40.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 32.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 24.00MHz
ztex_ufm1_15d1-0001-02-06: Set frequency to 16.00MHz
ztex_ufm1_15d1-0001-02-06: f=16.00MHz, submitted 0 new nonces, submitted hash
rate 39.7MH/s
ztex_ufm1_15d1-0001-02-06: Set frequency to 8.00MHz
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=29.64%, maxErrorRate=29.64%,
hash rate: 5.6MH/s, submitted 0 new nonces, submitted hash rate 37.9MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=72.62%, maxErrorRate=72.62%,
hash rate: 2.2MH/s, submitted 0 new nonces, submitted hash rate 36.3MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 34.8MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 33.5MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 32.2MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 31.1MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 30.0MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 29.0MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 28.0MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 27.1MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 26.3MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 25.5MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 24.8MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 24.1MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 23.4MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 22.8MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 22.2MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 21.7MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 21.1MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 20.6MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 20.1MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 19.7MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 19.2MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 18.8MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 18.4MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 18.0MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 0 new nonces, submitted hash rate 17.6MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=100.00%, maxErrorRate=100.00%,
  hash rate: 0.0MH/s, submitted 1 new nonces, submitted hash rate 23.1MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=99.07%, maxErrorRate=100.00%,
hash rate: 0.1MH/s, submitted 0 new nonces, submitted hash rate 22.6MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=98.94%, maxErrorRate=100.00%,
hash rate: 0.1MH/s, submitted 0 new nonces, submitted hash rate 22.2MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=97.99%, maxErrorRate=100.00%,
hash rate: 0.2MH/s, submitted 0 new nonces, submitted hash rate 21.7MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=97.95%, maxErrorRate=100.00%,
hash rate: 0.2MH/s, submitted 0 new nonces, submitted hash rate 21.3MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=89.73%, maxErrorRate=100.00%,
hash rate: 0.8MH/s, submitted 1 new nonces, submitted hash rate 26.2MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=86.27%, maxErrorRate=100.00%,
hash rate: 1.1MH/s, submitted 1 new nonces, submitted hash rate 30.8MH/s
ztex_ufm1_15d1-0001-02-06: f=8.00MHz, errorRate=87.89%, maxErrorRate=100.00%,
hash rate: 1.0MH/s, submitted 0 new nonces, submitted hash rate 30.3MH/s

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: Turbor on January 27, 2012, 12:00:14 PM

Both heatsink have been mounted with the same glue. One is working at 204 MHz the other has 100% error rate at 6 MHz. I fear that fpga is dead. Must have been a monday chip

Why you did'nt use the adhesive pads delivered with the boards. They have an Aluminum carrier.

Try out the "ztex_ufm1_15d1" firmware of the new release.

I'm sure it is no Monday chip. All FPGA boards are tested and AFAIR the FPGA boards you got have even been tested with the BTCMiner. Give me the last 3 digits of the serial number (you see it if you start the FPGA board in single mode with no firmware in EEPROM or with closed jumper). I will complete the number (as proof that it has been tested) and tell you which BTCMiner ran on this board.

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

That happens just seconds after i start the boards... countdown to death

Code:

(Re)Scanning bus ...
ztex_ufm1_15d2-0001-02-05: New device: bitfile=ztex_ufm1_15d2 f_default=192.00
MHz f_max=222.00MHz HpC=1.0H
ztex_ufm1_15d2-0001-02-05: FPGA configuration time: 294 ms
ztex_ufm1_15d2-0001-02-05: Set frequency to 192.00MHz
Starting mining thread for bus bus-0-0
bus-0-0: ztex_ufm1_15d2-0001-02-05: added
ztex_ufm1_15d2-0001-02-06: New device: bitfile=ztex_ufm1_15d2 f_default=192.00
MHz f_max=222.00MHz HpC=1.0H
ztex_ufm1_15d2-0001-02-06: FPGA configuration time: 295 ms
ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: added

Summary:
Bus bus-0-0 : 2 devices
Total : 2 devices

Disconnect all devices or press Ctrl-C for exit.
Press "r" Enter for re-scanning.

bus-0-0: ztex_ufm1_15d2-0001-02-05: Using LongPolling URL http://mint.bitminter.
com:8332/lp
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
New block detected by long polling
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: f=192.00MHz, errorRate=0.00%, maxErrorRate
=0.00%, hash rate: 192.0MH/s, submitted 2 new nonces, submitted hash rate 143
.2MH/s
bus-0-0: ztex_ufm1_15d2-0001-02-06: f=186.00MHz, maxErrorRate=2.99%, submitted
4 new nonces, submitted hash rate 286.3MH/s
bus-0-0: poll loop time: 35ms (USB: 2ms network: 32ms) getwork time: 257ms su
bmit time: 702ms
bus-0-0: Warning: 1 overflows occured. This is usually caused by a slow network
connection.
Total hash rate: 372.4 MH/s
Total submitted hash rate: 429.5 MH/s
--------
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 198.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 192.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 186.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 180.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 174.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 168.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 162.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 156.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 210.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: Set frequency to 204.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 138.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 150.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 138.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 138.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 138.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 144.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 138.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 138.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 138.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 120.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 132.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 120.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 120.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 126.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 120.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 114.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 120.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 114.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 120.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 114.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 120.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 108.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 114.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 108.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 114.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 108.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 114.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 102.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 108.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 102.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 108.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 102.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-05: f=204.00MHz, errorRate=0.24%, maxErrorRate
=0.72%, hash rate: 203.5MH/s, submitted 14 new nonces, submitted hash rate 19
0.8MH/s
bus-0-0: ztex_ufm1_15d2-0001-02-06: f=102.00MHz, maxErrorRate=3.97%, submitted
1 new nonces, submitted hash rate 59.6MH/s
bus-0-0: poll loop time: 25ms (USB: 10ms network: 15ms) getwork time: 261ms s
ubmit time: 391ms
bus-0-0: Warning: 2 overflows occured. This is usually caused by a slow network
connection.
Total hash rate: 301.5 MH/s
Total submitted hash rate: 250.4 MH/s
--------
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 96.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 102.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 96.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 102.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 96.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 90.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 96.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 90.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 96.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 90.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 84.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 90.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 84.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 90.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 84.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 78.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 84.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 78.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 84.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 78.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 72.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 78.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 72.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 66.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 72.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 66.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 60.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 54.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 48.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 42.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 36.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 30.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 24.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 18.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 12.00MHz
bus-0-0: ztex_ufm1_15d2-0001-02-06: Set frequency to 6.00MHz

Both heatsink have been mounted with the same glue. One is working at 204 MHz the other has 100% error rate at 6 MHz. I fear that fpga is dead. Must have been a monday chip Cheesy

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

Thank you for your time. USB issue is solved with the other computer. I ended up gluing down the heatsinks with cementit. Works very well for the working unit but it has something... let's say "final" in it. I have to check the psu tomorrow. I'm not saying this is your fault, just try to find a solution. A 120mm fan should be good enough for two boards. I run Win 7 btw

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

Quote from: Turbor on January 26, 2012, 08:37:53 PM

I couldn't run the boards at the USB3.0 port. Got an error when i tried to upload the firmware.

Which error message? Which OS? It is probably an OS/driver issue since USB 3.0 should be downward compatible.

Quote

The other problem i ran into was the placement of the heatsinks (1.15d).

See http://www.ztex.de/usb-fpga-1/usb-fpga-1.15.e.html#hs for mounting instructions.

Quote

While the other one runs stable @ 200 MHz (max error rate 0.82) the other board clocks itself down to zero. Huh

Usually this is caused if the PSU is to weak or not fast enough. Please send me the logs / output per email. (Also the USB 3.0 errors).

Quote

I remounted the heatsink about 20 times. Can this be a cooling problem ?

Possible. Avoid unmountig. What kind of pads do you use? (I only shipped two of them)

Quote

It also gets pretty hot compared to the other heatsink Undecided

Hot compared to the 1.15x FPGA board or hot compared to the heat sink of the other 1.15d FPGA board? In the latter case this indicates a problem.

I warned you that cooling the 1.15d boards is more difficult.

Turbor

legendary

Activity: 1022

Merit: 1000

BitMinter

I couldn't run the boards at the USB3.0 port. Got an error when i tried to upload the firmware. 2.0 works fine. Anyway, i connected them to my home PC. The other problem i ran into was the placement of the heatsinks (1.15d). One unit is acting very strange. While the other one runs stable @ 200 MHz (max error rate 0.82) the other board clocks itself down to zero. Huh

I remounted the heatsink about 20 times. Can this be a cooling problem ? It also gets pretty hot compared to the other heatsink Undecided

Spent more than six hours to connect two boards... sometimes life fucks you pretty bad. At least one is running

Edit: Thanks for the new version ! Works great.

ztex

donator

Activity: 367

Merit: 250

ZTEX FPGA Boards

A new software release has been published (release 120126, download from http://www.ztex.de/btcminer). New features are:

Faster Bitstreams
Stale reduction by long polling and block monitoring (works also if the cluster is connected to local Bitcoin server only)
60% faster FPGA configuration on USB-FPGA Modules 1.15x
Frequency scaling steps reduced from 8Mhz to 6MHz. This allows better frequency optimization.

In order to avoid compatibility problems the new 6Mhz firmware (which also defines the bitstream) is named ''ztex_ufm1_15d2.ihx''.

Clusters can be updated by the command

Code:

java -cp ZtexBTCMiner-120126.jar BTCMiner -m p -pt ztex_ufm1_15d1 -f ztex_ufm1_15d2.ihx

In single board mode only the parameter "-f"' has to be changed.

See http://www.ztex.de/btcminer for details.

For backward compatibility the package still contains "ztex_ufm1_15d1.ihx" 8MHz firmware (and bitstream).

In a few cases the 8Mhz bitstream is faster than the 6Mhz bitstream, e.g. if the board achieves 208 MHz but not 210 MHz. But on average the 6MHz firmware is a little bit faster because it allows better frequency optimization.

The old 8MHz firmware/bitstream will be removed in future versions.

Topic: BTCMiner - Open Source Bitcoin Miner for ZTEX FPGA Boards, 215 MH/s on LX150 - page 22. (Read 161727 times)