Pages:
Author

Topic: [CAPT] CAPTcoin - page 9. (Read 1059804 times)

legendary
Activity: 1672
Merit: 1010
March 13, 2017, 07:01:39 PM
Thank you yogg, have you tried to send CAPT to another address??
i have tested sent 10 capt to yobit and it is working sent succesfuly and the i sent it back from yobit to my capt wallet and it is working too,
Thank you! How many blocks do you have sync?



Yobit is working and says 1785181.
Cryptopia is likely still trying to catch up because the network is in such poor health.
BX was working last time i used it but they have fallen out of sync, they do not show any information on the state of their wallets unfortunately..
legendary
Activity: 1672
Merit: 1010
March 13, 2017, 06:41:00 PM
Just look at to yobit for capt/btc trading the price is up to 617 Satoshi now, and I also have sync my capt wallet and got staking easily, I think the capt is wake up now
Can you share your bootstrap? I have a lot of difficult to download the blockchain, is too slow. Can you share your .conf file too please? Thank you.

These are synced upto 16 Jan 2017 or block 1773967.  
Once unpacked/bootstrap it will continue and sync the remaining blocks that been created since then.  

CAPT blockchain folder windows / snapshot  - Just unpack/replace into your CAPT blockchain also may need to set txindex=1 in conf as this is whats in my conf file.

CAPT_BlockchainFolder_2017-01-16_1773967_txindex.7z   1.15 GB
https://mega.nz/#!wEhHGJha!vCsGL9VW0rlFWmbF1X-wkVvUiCXSxIsg9umcITd1Bvw

CAPT_Bootstrap_2017-01-16_1773967.7z   464.8 MB
https://mega.nz/#!wRAASLJS!GmKIt8HKA25YKChRT9gcOIKgIB1OAPuoquYtipxwxls

Not that much staking going on lately so it will catch up with the latest blocks on if adding it now. Smiley

Happy staking Smiley

There you go. Smiley

But somehow this doesn't seem to be the correct chain. It's about 100,000 blocks ahead of the chain that was at cryptopia, and I don't know about Yobit.

It makes me wonder ...
Would that be possible that the user sharing this bootstrap solomined the chain alone, and if the community uses this chain as the capt blockchain he'll get a bunch of CAPTs ?

Roll Eyes  Are you for real?
Why would i waste all that time trying to get a bunch of CAPTs?  this is a 3 year old coin, 100% Proof-of-stake, 100% premined by the dev for his Captcha distribution hence the name "CAPT" (Did you even read the first page?)
Since CAPT was 100% PoS so what you are describing is near impossible for anyone except the dev, and you are suggesting that i have somehow magically PoW mined 100% premined PoS coin to create 3 year long chain just so i could upload a blockchain and get a bunch of CAPTs? What would I do with them?  You are obviously unaware that no exchange uses bootstraps so therefore i would have no way to deposit onto them.

oh but lets see its all clear why you are posting senseless and ignorant posts here... nice freshly bought account there you have there for signature spamming threads with is it?

"It makes me wonder ...
Would it be possible you are not the original owner of the "yogg" account and that your "trust" is something you have inherited from the previous owner and did not earn yourself to get a bunch of loans or cheat signature campaigns ?
"




If you think there is something malicious then don't use the bootstrap, download from the peer network, and this way you would also be another peer helping to keep the network alive.  At the moment it very difficult to maintain a synced wallet as the main node changes its IP and without a working seednode its can take days if not weeks before its rediscovered if the wallet is restarted. Sad
 
ecuamobi the CAPT dev used to provide bootstraps and nodes before he abandoned the coin, and its been limping along ever since he shut them down without warning.  Now with only a few exchanges and a handful of nodes, it has become a nightmare to sync from scratch, so i uploaded mine as convenience for others that are still around.

If you really want to help then how being constructive eg: run a node, find us a new dev to update the wallet, help pay for some hosting on a block explorer that has the live network info so we people would not have problems and delays get their CAPT wallet synced up.

legendary
Activity: 1596
Merit: 1009
March 13, 2017, 07:57:02 AM
Thank you yogg, have you tried to send CAPT to another address??
i have tested sent 10 capt to yobit and it is working sent succesfuly and the i sent it back from yobit to my capt wallet and it is working too,
Thank you! How many blocks do you have sync?
full member
Activity: 222
Merit: 100
March 13, 2017, 07:47:12 AM
Thank you yogg, have you tried to send CAPT to another address??
i have tested sent 10 capt to yobit and it is working sent succesfuly and the i sent it back from yobit to my capt wallet and it is working too,
legendary
Activity: 1596
Merit: 1009
March 13, 2017, 03:16:55 AM
Thank you yogg, have you tried to send CAPT to another address??
legendary
Activity: 2464
Merit: 3158
March 12, 2017, 06:15:24 PM
Just look at to yobit for capt/btc trading the price is up to 617 Satoshi now, and I also have sync my capt wallet and got staking easily, I think the capt is wake up now
Can you share your bootstrap? I have a lot of difficult to download the blockchain, is too slow. Can you share your .conf file too please? Thank you.

These are synced upto 16 Jan 2017 or block 1773967.  
Once unpacked/bootstrap it will continue and sync the remaining blocks that been created since then.  

CAPT blockchain folder windows / snapshot  - Just unpack/replace into your CAPT blockchain also may need to set txindex=1 in conf as this is whats in my conf file.

CAPT_BlockchainFolder_2017-01-16_1773967_txindex.7z   1.15 GB
https://mega.nz/#!wEhHGJha!vCsGL9VW0rlFWmbF1X-wkVvUiCXSxIsg9umcITd1Bvw

CAPT_Bootstrap_2017-01-16_1773967.7z   464.8 MB
https://mega.nz/#!wRAASLJS!GmKIt8HKA25YKChRT9gcOIKgIB1OAPuoquYtipxwxls

Not that much staking going on lately so it will catch up with the latest blocks on if adding it now. Smiley

Happy staking Smiley

There you go. Smiley

But somehow this doesn't seem to be the correct chain. It's about 100,000 blocks ahead of the chain that was at cryptopia, and I don't know about Yobit.

It makes me wonder ...
Would that be possible that the user sharing this bootstrap solomined the chain alone, and if the community uses this chain as the capt blockchain he'll get a bunch of CAPTs ?
legendary
Activity: 1596
Merit: 1009
March 12, 2017, 09:55:30 AM
Just look at to yobit for capt/btc trading the price is up to 617 Satoshi now, and I also have sync my capt wallet and got staking easily, I think the capt is wake up now
Can you share your bootstrap? I have a lot of difficult to download the blockchain, is too slow. Can you share your .conf file too please? Thank you.
full member
Activity: 222
Merit: 100
March 12, 2017, 08:11:00 AM
Just look at to yobit for capt/btc trading the price is up to 617 Satoshi now, and I also have sync my capt wallet and got staking easily, I think the capt is wake up now
legendary
Activity: 1470
Merit: 1010
Join The Blockchain Revolution In Logistics
March 12, 2017, 07:32:37 AM
is the Captain still around?

EquadorMobi or something??
legendary
Activity: 1596
Merit: 1009
March 12, 2017, 06:53:25 AM
I'm trying to sync the wallet. This is my peerinfo with 2 connections:

11:53:13

[
{
"addr" : "75.86.123.79:26652",
"services" : "00000001",
"lastsend" : 1489315993,
"lastrecv" : 1489315993,
"conntime" : 1489315264,
"version" : 60007,
"subver" : "/CAPTcoin:0.7.3/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 1638804,
"banscore" : 0
},
{
"addr" : "45.32.1.45:26652",
"services" : "00000001",
"lastsend" : 1489315707,
"lastrecv" : 1489315710,
"conntime" : 1489315706,
"version" : 60007,
"subver" : "/CAPTcoin:0.7.3/",
"inbound" : false,
"releasetime" : 0,
"startingheight" : 774514,
"banscore" : 0
}
]
legendary
Activity: 2464
Merit: 3158
March 11, 2017, 12:02:11 AM
Can someone post a few fresh node addresses ?
Seems I can't connect to network. Thanks !
full member
Activity: 222
Merit: 100
March 06, 2017, 05:19:48 PM
and why my capt wallet always keep staking almost every minutes even the blockchain still downloaded for about 60% remain blockchain?

you have to prevent staking while you syncing the blockchain or just use an empty wallet.dat first, then switch to your real wallet after its synced.  use a reserve balance and disable it when you want to stake is the simple to way to avoid a rush of orphans and slowdown while wallet is still downloading blockchain.
oke, i see..do you have the last blockchain file for me to download it and replace in my capt roaming folder, in my blockchain folder now have reach 1.166.992 kb for blkindex file, but it is still not syncing and the wallet still said "the checkpoint is too old" what is that mean?
legendary
Activity: 1672
Merit: 1010
March 05, 2017, 08:28:20 PM
and why my capt wallet always keep staking almost every minutes even the blockchain still downloaded for about 60% remain blockchain?

you have to prevent staking while you syncing the blockchain or just use an empty wallet.dat first, then switch to your real wallet after its synced.  use a reserve balance and disable it when you want to stake is the simple to way to avoid a rush of orphans and slowdown while wallet is still downloading blockchain.
full member
Activity: 222
Merit: 100
February 14, 2017, 09:00:38 PM
and why my capt wallet always keep staking almost every minutes even the blockchain still downloaded for about 60% remain blockchain?
full member
Activity: 222
Merit: 100
February 08, 2017, 10:22:15 AM
These are synced upto 16 Jan 2017 or block 1773967. 
Once unpacked/bootstrap it will continue and sync the remaining blocks that been created since then. 

CAPT blockchain folder windows / snapshot  - Just unpack/replace into your CAPT blockchain also may need to set txindex=1 in conf as this is whats in my conf file.

CAPT_BlockchainFolder_2017-01-16_1773967_txindex.7z   1.15 GB
https://mega.nz/#!wEhHGJha!vCsGL9VW0rlFWmbF1X-wkVvUiCXSxIsg9umcITd1Bvw

CAPT_Bootstrap_2017-01-16_1773967.7z   464.8 MB
https://mega.nz/#!wRAASLJS!GmKIt8HKA25YKChRT9gcOIKgIB1OAPuoquYtipxwxls

Not that much staking going on lately so it will catch up with the latest blocks on if adding it now. Smiley

Happy staking Smiley
i have downloaded your CaptFolder 1,5 Gb, but when i put it in capt folder on app data it said eror every i start capt wallet why??


Did you delete everything that was in there first? (xcept wallet.dat & .conf)   Add "txindex=1" to .conf? 

It works perfectly for me so I don't know what error you are getting or why, but try the above, i left my .conf out but i can take a look later and see if i had any other options in there that might affect it or post a copy here.
i have done all you said above and it is working, blockchain successfull sync, but i have a problem i have a captcoin wallet dat file that contain about 35K caaptcoin, i delete the old wallet on app data on captcoin folder then replace it with my wallet fille that cointain 35 k captoin, runing it again for a minute it is working but then in a seconds it is diseppear and always happen like this again when i try to run captcoin qt


Open qt, go to debug->console, type repairwallet. Solved!!!
if i can open wallet qt, i will follow your instruction, the problem is when i click wallet qt it shown just a second and then disappears.. but i have solve the problem by deleteing the bootstrap and download the blockchain normall and for now have downloaded aboout 50% of the blockchain
sr. member
Activity: 434
Merit: 250
February 03, 2017, 12:53:33 PM
These are synced upto 16 Jan 2017 or block 1773967. 
Once unpacked/bootstrap it will continue and sync the remaining blocks that been created since then. 

CAPT blockchain folder windows / snapshot  - Just unpack/replace into your CAPT blockchain also may need to set txindex=1 in conf as this is whats in my conf file.

CAPT_BlockchainFolder_2017-01-16_1773967_txindex.7z   1.15 GB
https://mega.nz/#!wEhHGJha!vCsGL9VW0rlFWmbF1X-wkVvUiCXSxIsg9umcITd1Bvw

CAPT_Bootstrap_2017-01-16_1773967.7z   464.8 MB
https://mega.nz/#!wRAASLJS!GmKIt8HKA25YKChRT9gcOIKgIB1OAPuoquYtipxwxls

Not that much staking going on lately so it will catch up with the latest blocks on if adding it now. Smiley

Happy staking Smiley
i have downloaded your CaptFolder 1,5 Gb, but when i put it in capt folder on app data it said eror every i start capt wallet why??


Did you delete everything that was in there first? (xcept wallet.dat & .conf)   Add "txindex=1" to .conf? 

It works perfectly for me so I don't know what error you are getting or why, but try the above, i left my .conf out but i can take a look later and see if i had any other options in there that might affect it or post a copy here.
i have done all you said above and it is working, blockchain successfull sync, but i have a problem i have a captcoin wallet dat file that contain about 35K caaptcoin, i delete the old wallet on app data on captcoin folder then replace it with my wallet fille that cointain 35 k captoin, runing it again for a minute it is working but then in a seconds it is diseppear and always happen like this again when i try to run captcoin qt


Open qt, go to debug->console, type repairwallet. Solved!!!
legendary
Activity: 1470
Merit: 1010
Join The Blockchain Revolution In Logistics
February 03, 2017, 12:42:26 PM
full member
Activity: 222
Merit: 100
January 30, 2017, 08:36:28 PM
These are synced upto 16 Jan 2017 or block 1773967. 
Once unpacked/bootstrap it will continue and sync the remaining blocks that been created since then. 

CAPT blockchain folder windows / snapshot  - Just unpack/replace into your CAPT blockchain also may need to set txindex=1 in conf as this is whats in my conf file.

CAPT_BlockchainFolder_2017-01-16_1773967_txindex.7z   1.15 GB
https://mega.nz/#!wEhHGJha!vCsGL9VW0rlFWmbF1X-wkVvUiCXSxIsg9umcITd1Bvw

CAPT_Bootstrap_2017-01-16_1773967.7z   464.8 MB
https://mega.nz/#!wRAASLJS!GmKIt8HKA25YKChRT9gcOIKgIB1OAPuoquYtipxwxls

Not that much staking going on lately so it will catch up with the latest blocks on if adding it now. Smiley

Happy staking Smiley
i have downloaded your CaptFolder 1,5 Gb, but when i put it in capt folder on app data it said eror every i start capt wallet why??


Did you delete everything that was in there first? (xcept wallet.dat & .conf)   Add "txindex=1" to .conf? 

It works perfectly for me so I don't know what error you are getting or why, but try the above, i left my .conf out but i can take a look later and see if i had any other options in there that might affect it or post a copy here.
i have done all you said above and it is working, blockchain successfull sync, but i have a problem i have a captcoin wallet dat file that contain about 35K caaptcoin, i delete the old wallet on app data on captcoin folder then replace it with my wallet fille that cointain 35 k captoin, runing it again for a minute it is working but then in a seconds it is diseppear and always happen like this again when i try to run captcoin qt
hero member
Activity: 1330
Merit: 585
Leading Crypto Sports Betting & Casino Platform
January 27, 2017, 09:37:40 AM
capt-coin, i still remember with this coin when i earn them from type captcha but now i dont remeber where i save it
legendary
Activity: 1672
Merit: 1010
January 27, 2017, 04:24:14 AM
These are synced upto 16 Jan 2017 or block 1773967. 
Once unpacked/bootstrap it will continue and sync the remaining blocks that been created since then. 

CAPT blockchain folder windows / snapshot  - Just unpack/replace into your CAPT blockchain also may need to set txindex=1 in conf as this is whats in my conf file.

CAPT_BlockchainFolder_2017-01-16_1773967_txindex.7z   1.15 GB
https://mega.nz/#!wEhHGJha!vCsGL9VW0rlFWmbF1X-wkVvUiCXSxIsg9umcITd1Bvw

CAPT_Bootstrap_2017-01-16_1773967.7z   464.8 MB
https://mega.nz/#!wRAASLJS!GmKIt8HKA25YKChRT9gcOIKgIB1OAPuoquYtipxwxls

Not that much staking going on lately so it will catch up with the latest blocks on if adding it now. Smiley

Happy staking Smiley
i have downloaded your CaptFolder 1,5 Gb, but when i put it in capt folder on app data it said eror every i start capt wallet why??


Did you delete everything that was in there first? (xcept wallet.dat & .conf)   Add "txindex=1" to .conf? 

It works perfectly for me so I don't know what error you are getting or why, but try the above, i left my .conf out but i can take a look later and see if i had any other options in there that might affect it or post a copy here.
Pages:
Jump to: