Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 1037. (Read 2347601 times)

Quote from: antonio8 on July 15, 2015, 08:18:06 PM

Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?

thanks - pokeytex

edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?

edit2: Am compiling Trupvot's 1.5.3 version to try it out now.

I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does.

EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes.

Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad?

The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal.

So try and run each card on it's own bat and see if the same one keeps crashing.

Easiest way I found was individual bats.

Ok will try that now - what os are you/were you running?

Windows 7 64bit

Also, your PSU is strong enough, correct?

EDIT Windows 10 on one.

Ok -

- Individual bats worked perfect. Whirlpoolx doesn't seem to like grouping GPU's under Windows 8.1 64bit? Individually they all work fine. Lags my machine pretty good. I guess I will stick with Quark for now even though it appears to be dropping off the face of the earth. Any new algo's anyone checking out?

EDIT: Last tip that might help. If you are not gaming and have on board graphics and using one monitor use the on board. If you surf and do other things then don't mine on gpu 0 until you are done (if multi monitor setup) or mine a less intensive algo while multi tasking on that card.

pokeytex

legendary

Activity: 1504

Merit: 1002

Quote from: pokeytex on July 15, 2015, 08:15:54 PM

Quote from: pokeytex on July 15, 2015, 08:15:54 PM

Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?

thanks - pokeytex

edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?

edit2: Am compiling Trupvot's 1.5.3 version to try it out now.

I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does.

EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes.

Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad?

The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal.

So try and run each card on it's own bat and see if the same one keeps crashing.

Easiest way I found was individual bats.

Ok will try that now - what os are you/were you running?

Windows 7 64bit

Also, your PSU is strong enough, correct?

EDIT Windows 10 on one.

Ok -

- Individual bats worked perfect. Whirlpoolx doesn't seem to like grouping GPU's under Windows 8.1 64bit? Individually they all work fine. Lags my machine pretty good. I guess I will stick with Quark for now even though it appears to be dropping off the face of the earth. Any new algo's anyone checking out?

hashbrown9000

sr. member

Activity: 427

Merit: 250

not using a bat, and running straight from the command line, what's the command to enable only a single GPU?

antonio8

legendary

Activity: 1400

Merit: 1000

Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?

thanks - pokeytex

edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?

edit2: Am compiling Trupvot's 1.5.3 version to try it out now.

I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does.

EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes.

Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad?

The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal.

So try and run each card on it's own bat and see if the same one keeps crashing.

Easiest way I found was individual bats.

Ok will try that now - what os are you/were you running?

Windows 7 64bit

Also, your PSU is strong enough, correct?

EDIT Windows 10 on one.

pokeytex

legendary

Activity: 1504

Merit: 1002

Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?

thanks - pokeytex

edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?

edit2: Am compiling Trupvot's 1.5.3 version to try it out now.

I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does.

EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes.

Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad?

The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal.

So try and run each card on it's own bat and see if the same one keeps crashing.

Easiest way I found was individual bats.

Ok will try that now - what os are you/were you running?

antonio8

legendary

Activity: 1400

Merit: 1000

Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?

thanks - pokeytex

edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?

edit2: Am compiling Trupvot's 1.5.3 version to try it out now.

I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does.

EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes.

Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad?

The miner kept crashing so I put each card on it's own bat and the same card kept crashing. I kept switching cards to make sure the card was good and every card I put on the riser crashed. I had ordered some (even some new ones was bad) but now I have just about everything back to normal.

So try and run each card on it's own bat and see if the same one keeps crashing.

Easiest way I found was individual bats.

pokeytex

legendary

Activity: 1504

Merit: 1002

Yeah - just confirmed on my three rigs I cannot run Whirlpoolx for some reason. It starts to mine - even shows up on Suprnova and then the driver crashes. Each rig - weird. Any help or ideas?

thanks - pokeytex

edit: Am running Windows 8.1 pro on all machines - ? maybe OS limitation?

edit2: Am compiling Trupvot's 1.5.3 version to try it out now.

I have a mixed rig also and on some algos I have to put the same cards on it's own bat. Try running them that way and see what it does.

EDIT: This is a another option but PITA. Run one card at a time and see if it crashes. I just went through some bad risers causing crashes.

Hrmm that would make sense to me however (2) of the rigs are only 750ti's. Regarding the risers wouldn't the other algos crash if the risers were bad?

antonio8

legendary

Activity: 1400

Merit: 1000